PDA

View Full Version : 2 Type X 12's Ported. Need Help!



jco1385
07-11-2008, 01:21 PM
I want to do 2 type x's ported in my trunk. i'm not sure what will be the best setup. I want the box to be as small as possible, but also have as much output as possible. The dimensions i have to work with are: 16" tall x 37" wide x 22" deep (top) and 26" deep (bottom). Remember SMALLER is BETTER. I want to have the subs and port forward. This will fire into the cabin of my car. So. slant forward, subs on slant port in the middle if possible.

jco1385
07-11-2008, 02:06 PM
seth, you said if i make it they will come...????

jco1385
07-11-2008, 03:48 PM
seth is full of lies

tez4life
07-11-2008, 04:03 PM
lol

jco1385
07-11-2008, 04:22 PM
lol is indeed correct.

tez4life
07-11-2008, 04:29 PM
Well, not to cluter up your thread, but I have not had a chance to do much myself. Got all my 0 gauge clamped up at work for my power wire and Big 3, but have not had time to install it :(

Plus, my box prob wont be here until Mon, right when I got to go back to work.

Im sure youve hit up most of the box builders on here correct?

jco1385
07-11-2008, 04:30 PM
Well, not to cluter up your thread, but I have not had a chance to do much myself. Got all my 0 gauge clamped up at work for my power wire and Big 3, but have not had time to install it :(

Plus, my box prob wont be here until Mon, right when I got to go back to work.

Im sure youve hit up most of the box builders on here correct?

meh, i'm cheap. i'm building myself though. as you know. and i have no paypal. it seems kinda weird to send a $5 m/o then wait for them to get it for me to get my plan....na'm sayin

SethPhillips
07-11-2008, 04:33 PM
indeed...

i said if you make it them will come..

but ur gay so they run the other way..

whatchagottasay?

jco1385
07-11-2008, 04:34 PM
indeed...

i said if you make it them will come..

but ur gay so they run the other way..

whatchagottasay?

please read line above my ava :fyi:


:confused:

SethPhillips
07-11-2008, 04:36 PM
please read line above my ava :fyi:


:confused:

ok.. well i dont wanna post dump in this thread.. i got's respect...


but












hurry up and build the fuckin box!!!

jco1385
07-11-2008, 04:38 PM
ok.. well i dont wanna post dump in this thread.. i got's respect...


but












hurry up and build the fuckin box!!!


i need a box to build :fyi:

SethPhillips
07-11-2008, 04:39 PM
bump for this homo....

jco1385
07-11-2008, 04:42 PM
carry on, carry on folks.

where's that psycho guy when you need him...???

jco1385
07-12-2008, 01:55 PM
passin thru bump...

psych0ticnemes1
07-12-2008, 01:56 PM
If I had time I'd help but I don't. Sorry bro.

jco1385
07-12-2008, 01:58 PM
i do understand. and i appreciate your help last time ;)

tez4life
07-12-2008, 02:03 PM
i do understand. and i appreciate your help last time ;)



As do I, even though I decided to buy a box instead of building one, I really apperciated the design.

And Jco, Ill make you a deal, I got paypal, if you got some money, give it to me and ill send it toward one of the box designers on here.

jco1385
07-12-2008, 02:06 PM
As do I, even though I decided to buy a box instead of building one, I really apperciated the design.

And Jco, Ill make you a deal, I got paypal, if you got some money, give it to me and ill send it toward one of the box designers on here.

werd. if anyone is down with that.

bonesninja
07-12-2008, 02:19 PM
Type X's = Sealed box and a 2500 watt amp
/thread

kotec123
07-12-2008, 02:23 PM
^^ agreed for sql greatness

fishy0689
07-12-2008, 02:46 PM
I had 2 type x's in about 6.5 cubes ported to around 21 hz... I had them firing back, and I think the box was too big for the trunk of my 05 corolla... it literally took the entire trunk up and allowed no air to get up front... I now have 1 type x in about 2 cubes at 32 hz and its not too shabby for being 1 sub. Plan on adding the other once I get time to make another fiberglass box for the other side.

jco1385
07-12-2008, 03:44 PM
Type X's = Sealed box and a 2500 watt amp
/thread

pshbbtt!! ported it shall be! :fyi:


^^ agreed for sql greatness

it will be greatness. it's already greatness. it will become greatness x2.

bonesninja
07-12-2008, 03:45 PM
pshbbtt!! ported it shall be! :fyi:



it will be greatness. it's already greatness. it will become greatness x2.

another non-believer

jco1385
07-12-2008, 03:48 PM
you are the non believer. i know what 1 does. i can image 2 being quite nice. i could give a **** about SQ :fyi:

i like to get loud. and i know you want to say "type x = sq sub". i know. and it sounds clean ported as well. maybe you should take a listen.

:)

jco1385
07-12-2008, 07:46 PM
i'm out this bish bump

jco1385
07-14-2008, 12:02 PM
monday bump


this is serious business :fyi:

jco1385
07-14-2008, 02:11 PM
:(

jco1385
07-14-2008, 05:10 PM
:(

x2.

goin home. please help me out if you can. monies can be arranged.

zack39648
07-15-2008, 01:02 AM
come on help this guy out!! would like to see him get my old sub bumpin again

pjvoc
07-15-2008, 01:54 AM
hows the hunt goin jco?

tez4life
07-15-2008, 02:54 AM
x2.

goin home. please help me out if you can. monies can be arranged.

x2, my offer is still there. If J is willing to give me the money, I have paypal waiting for anyone that can give my man a box design.




come on help this guy out!! would like to see him get my old sub bumpin again

x2 again, looking forward to hearing both of those 12s :)


On another note, I got my box today for my RL-p :veryhapp:

jco1385
07-15-2008, 09:21 AM
come on help this guy out!! would like to see him get my old sub bumpin again

haha, you're old sub is already bumpin. i wanted to "break it in" since you only had it on 800w. :laugh:

jco1385
07-15-2008, 09:22 AM
x2, my offer is still there. If J is willing to give me the money, I have paypal waiting for anyone that can give my man a box design.





x2 again, looking forward to hearing both of those 12s :)


On another note, I got my box today for my RL-p :veryhapp:

o'rly? you got everything else to get it going? i'll come help you out.

zack39648
07-15-2008, 09:36 AM
ha ha i told you it was still stiff as hell i never ever pounded on it hard at all hope you enjoying

zack39648
07-15-2008, 09:39 AM
.... whenever i get my AQ and get it installed i would like to officially challenge u... lol

jco1385
07-15-2008, 09:41 AM
ha ha i told you it was still stiff as hell i never ever pounded on it hard at all hope you enjoying

oh yeah son. it's probably seeing 1.2-1.3k now. i just tune it by ear so thats just guessing.

it definately gets down low. with 2 in it will be :crazy:

zack39648
07-15-2008, 09:44 AM
you ganna get another 1501 or upgrDE to one massive *** amp??

jco1385
07-15-2008, 09:47 AM
with 2 i'll get another 1501d. waiting on it from another cool *** dude on here.

currently gettin repaired since i apparently slaughtered it hardcore when i had it the first time.

jco1385
07-15-2008, 11:41 AM
holler if you hear me.

ttt.

jco1385
07-15-2008, 12:49 PM
up for lunch. c'mon somebody can do this.

tez4life
07-15-2008, 01:40 PM
o'rly? you got everything else to get it going? i'll come help you out.


Thanks man im good, been working on it piece by piece the last few days. Have had zero free time between these jobs, lol. Got my Big 3 done, amps mounted and hooked up, but part of the surround started to come off the RL-p :(

Still sounds ok, but cant really turn it up until thats fixed. Ill get it straight either today or tomorrow.

Bump this up, I know someone wants to handle this design!!

jco1385
07-15-2008, 02:34 PM
Thanks man im good, been working on it piece by piece the last few days. Have had zero free time between these jobs, lol. Got my Big 3 done, amps mounted and hooked up, but part of the surround started to come off the RL-p :(

Still sounds ok, but cant really turn it up until thats fixed. Ill get it straight either today or tomorrow.

Bump this up, I know someone wants to handle this design!!

i got some CA glue. you can get it at micheals

jco1385
07-15-2008, 03:35 PM
:fyi:

i'm willing to pay for this

:fyi:

psych0ticnemes1
07-15-2008, 04:11 PM
Alright alright, I'll work on it and get back to you when I have some dimensions, etc. alright?

jco1385
07-15-2008, 04:15 PM
Alright alright, I'll work on it and get back to you when I have some dimensions, etc. alright?

:woot:

just remember, smaller = better

psych0ticnemes1
07-15-2008, 04:18 PM
I will go with the smallest design possible without using aero ports, ok?

jco1385
07-15-2008, 04:21 PM
sweet. all the info is in the first post i think. slanted. subs and port on slant..

you are awesome. if you were a woman i'd let you touch my pp.

thanks man

psych0ticnemes1
07-15-2008, 04:28 PM
The price of design just doubled... ;)

jco1385
07-15-2008, 04:28 PM
:crap:

jco1385
07-19-2008, 01:51 PM
any progress on this? no rush, just curious...

Alpine CDA-9815
07-19-2008, 03:07 PM
Do them sealed.

jco1385
07-20-2008, 05:53 PM
please no one else tell me sealed. it will be ported


kthxbi

psych0ticnemes1
07-21-2008, 08:36 AM
I have made progress. Almost complete. I want to make sure my internal volume is correct before I send the plans. It isn't the easiest design I have done, that is for sure.

jco1385
07-21-2008, 08:44 AM
you are the man. thanks a lot

zack39648
07-21-2008, 08:50 AM
ya mane you ever get both them amps and x's bumpin ???

psych0ticnemes1
07-21-2008, 09:16 AM
You have a PM.

jco1385
07-21-2008, 12:14 PM
ya mane you ever get both them amps and x's bumpin ???

nope. no rush. i have more important things to pay for first. it's gonna be nutz though

zack39648
07-21-2008, 12:17 PM
coo coo i feel you ive been tuneless for almost 5 months now and still a couple months before i piece the rest together but once i finish youl wish you had more x's ha ha ha

tez4life
07-21-2008, 12:33 PM
Cool, glad this is going to happen. I been bassless for about a year or so, so having my RL-p banging in my trunk is made me pretty happy too. :)

jco1385
07-23-2008, 03:42 PM
this is gonna be teh secks :fyi:

can i post a pic psycho?