PDA

View Full Version : HELP: FiQ 18" ported box



GrandCherokee
07-08-2008, 03:15 PM
Im a noob when it comes to sub enclosures... and I need help.

The width of the box should be around 36"
Height= no more than 18"

I would like to make round ports but I was told not to...heres a sketch a guy made for me. The box is tuned to 32hz. The 3 round ports are 6inch by 16.75L.
http://i268.photobucket.com/albums/jj39/mazdasplfi/qforgrand.jpg

So I guess Im most likely going with the slot port design. This is what some guy told me, not sure if he was right:
build the box with the dimensions you have:
36 (L) x 28 (W) x 18 (H)

slot port:
5.5 (W) x 16.5 (H) x 42.75 (L)

Ends up being:
6.1ft^3 @ 28.05Hz

GrandCherokee
07-08-2008, 03:16 PM
I do have aim.
Send me a PM if you got aim as well
THANKS