PDA

View Full Version : box plans



MTs390
07-01-2008, 05:50 PM
hey guys i got two 15" mts and i need box plans. they are going in the back of a yukon so i have plenty of room but i have never built my own enclosure. I want it to have around 8-10cu ft and the port to be tuned to 36hz.
thanks guys

schrummy
07-01-2008, 06:04 PM
um...........could u give some max dims

MTs390
07-01-2008, 07:15 PM
the max dimesnsions are 40"Lx48"Wx20"H. it can be taller that is just about my window line.

RAM_Designs
07-01-2008, 07:17 PM
we also need to know how you want the sub/port positioned(subs up port back, sub and port back, etc.)...since you have an SUV I'd suggest subs up and port back.

MTs390
07-01-2008, 07:29 PM
yes subs up and port back.

RAM_Designs
07-01-2008, 07:33 PM
yes subs up and port back.

any decent design is going to cost you some kind of money...unless you find someone willing to do it for free.

MTs390
07-01-2008, 07:35 PM
i know but i was going to build it i just need some plans because i have never done it before

MTs390
07-01-2008, 07:37 PM
i could pry come up with some i just dont know how to tune the port and figure the cu ft. size

MTs390
07-01-2008, 08:08 PM
ok i am willing to pay for box plans

dannyz122001
07-01-2008, 08:41 PM
i'll do a little bit on sketchup. i have nothing else to do and would enjoy doing it. no charge, you can use it or get another one from someone else. no biggy for me

dannyz122001
07-01-2008, 08:41 PM
no cutsheet though, just a 3-D design

dannyz122001
07-01-2008, 08:42 PM
do you want a single port or subs divided and 2 ports?

EDIT: granted, other guys can give you a WAAAAAAAAAAY better design, but i have nothing else to do.

MTs390
07-01-2008, 08:47 PM
i want just one port

psych0ticnemes1
07-02-2008, 08:40 AM
You have a PM.

MTs390
07-02-2008, 04:29 PM
i need a plan soon to get all my stuff set up please