PDA

View Full Version : Port a downfire box!?



FirstOnRaceDay
06-30-2008, 06:12 PM
I have a 2004 F150 and will b getting back into deep,Techtronic P.E.B. music style. All I want is a way to port a customized downfire box with 2-Audiobahn DUB100 10's. Ported specs call for 0.70-2.30 cuft.The box I will get has 0.68 per chamber.I want to have it ported or should I have one built ported? I am ballin on a budget!!Any suggestions/help/comments are welcomed....

BuckyBoy
06-30-2008, 06:27 PM
You can't port the box that is .68 per chamber sealed. You are going to have to get another one built, or just go sealed.

FirstOnRaceDay
06-30-2008, 06:34 PM
I appreciate the fb.I had a feeling that was the answer especially with little airspace there is.Just wanted to see if I could get around it.I will get another built or continue to look for ported enclosures.I see that there is one called Audiofire that comes ported with a single 10. I only have experience with sealed enclosure in car trunks and I know a ported one will give me the boom I am looking for. It's just that the 150 SCREW,all you have to work with is underneath the seats.
You can't port the box that is .68 per chamber sealed. You are going to have to get another one built, or just go sealed.

BuckyBoy
06-30-2008, 06:38 PM
I can build you one if you are interested. I'm about an hour and a half from Atlanta.

BEAVER.989
06-30-2008, 06:39 PM
Yoy could possibly do an axternal port, depending on how much room you have, but a custom box is the best alternative.

FirstOnRaceDay
06-30-2008, 06:58 PM
I already sent you an email requesting a qoute.I'll b on da lookout for the response............
I can build you one if you are interested. I'm about an hour and a half from Atlanta.