PDA

View Full Version : Can someone double-check these measurements?



MotoRacer243
06-25-2008, 05:49 PM
2 12" R's
Can someone double check these for me if you have a couple of minutes to spare?

width - 46
height - 20
depth - 14
port width - 3.25
port length - 8
port area - 60.125
5.13 cu ft
32.4 hz



thanks alot...

NissanKicker
06-25-2008, 05:56 PM
I don't know if it's me trippin'...
... But I'm not getting 8" for the port length....

PokeFan
06-25-2008, 06:50 PM
looks like he pulled it right off the RE calc. If so that's the port length 2 that runs the back wall. Total should be ~23.6

MotoRacer243
06-25-2008, 11:12 PM
looks like he pulled it right off the RE calc. If so that's the port length 2 that runs the back wall. Total should be ~23.6

^^^^^^ yep I meant to put port length 2 to because I used the RE calculator....
sorry bout that..

so does the rest of the info check out ok?

PokeFan
06-27-2008, 03:58 PM
Looked good to me but there are much more qualified people around here to verify that for you.