PDA

View Full Version : Re sr10" (ported)



alfisti
06-23-2008, 09:38 PM
hi! first post to this great forum:D
I have some questions about re audio calculator.. box volume(ft3) is total internal volume including port volume right?
Re recommends 1cuft, is it internal or external?

http://img157.imageshack.us/img157/7462/resrke9.th.jpg (http://img157.imageshack.us/my.php?image=resrke9.jpg)

I tried to design something like this, so
-around 13-15sq port area
-and around 34-36hz tuning is good for using this sub daily i think? I hate the port noise so your comments are really important for me:)
(should I make flared corners etc. can it make a big difference?)

NissanKicker
06-23-2008, 10:08 PM
That's 1cuft Internally...
... I would do 1.5cuft internally @ 43... Just a lil' bigger than recommended never hurts.

miker
06-23-2008, 11:35 PM
What's up with you and high tuning?

Tune more around 32-33hz

NissanKicker
06-24-2008, 12:00 AM
What's up with you and high tuning?

Tune more around 32-33hz

lol...

regal8r
06-24-2008, 12:02 AM
What's up with you and high tuning?

Tune more around 32-33hz

high tuning because its a 10 :fyi:

i had a pair of tc9 10s tuned to 40hz and dominated the lows better than alot of 12s and some 15s :fyi:

alfisti
06-24-2008, 08:37 AM
my goal is the highest output possible without sacrificing lows a lot. I love jeezy songs like white girl lol:D some say 30-32hz some 40hz :confused:
port area is confusing too.. what number should it be?
Thanks

miker
06-24-2008, 09:43 AM
Do in the low 30's if thats what you listen to.

alfisti
06-24-2008, 05:13 PM
thanks but no one said anything about port area? Is it good in my design?
mid 30's is optimal for me i think. because i listen a wide range of music genre along with jeezy stuff :)

NissanKicker
06-24-2008, 06:08 PM
It's not gonna be alot!

alfisti
06-26-2008, 02:47 PM
It's not gonna be alot!

:confused::confused:

PV Audio
06-26-2008, 02:49 PM
That's 1cuft Internally...
... I would do 1.5cuft internally @ 43... Just a lil' bigger than recommended never hurts.43? You wonder why I give you a hard time? I'd tune lower than 34 even.

PV Audio
06-26-2008, 02:50 PM
my goal is the highest output possible without sacrificing lows a lot. I love jeezy songs like white girl lol:D some say 30-32hz some 40hz :confused:
port area is confusing too.. what number should it be?
Thanks30-32 for anything but electronic is good.

PV Audio
06-26-2008, 02:51 PM
high tuning because its a 10 :fyi:

i had a pair of tc9 10s tuned to 40hz and dominated the lows better than alot of 12s and some 15s :fyi:
Cone size should not reflect tuning and vice versa.

NissanKicker
06-26-2008, 03:33 PM
43? You wonder why I give you a hard time? I'd tune lower than 34 even.

He didn't say what type of music he listens to when I posted that...

PV Audio
06-26-2008, 03:37 PM
Which is exactly the point. Tuning high is suited for very, VERY few musical genres. For most, low 30s are ideal.

NissanKicker
06-26-2008, 03:45 PM
True...
... my system is tuned @ ~48.39hz ... SPL is great, so is daily slamming.
* Lows could be worked on though... *

thur5d4yf4n
06-28-2008, 04:38 AM
True...
... my system is tuned @ ~48.39hz ... SPL is great, so is daily slamming.
* Lows could be worked on though... *

:rolleyes: