PDA

View Full Version : which template



rloring
06-23-2008, 06:27 PM
OK can someone mabey point out which temp in the sticky box plans above I should use for ported 12" cvr, 2 and 3 sub set up pls ) I can build it but just dont know which one as i dont understand the lableing thnx guys )

PokeFan
06-23-2008, 06:34 PM
what's the volume and tuning you need?

rloring
06-23-2008, 06:47 PM
what's the volume and tuning you need?

As in what size box I can fit and what tuneing i want??

PokeFan
06-23-2008, 06:53 PM
right, I'm thinking about 2 cubes. What do you want the tuning at?

Here, this is 2 cubes @35hz
http://img34.imageshack.us/my.php?image=2cubes35hz4025sqin9vv.png

rloring
06-23-2008, 06:57 PM
vehicle --000 Ford Expedition
3rd row is taken out
Cargo--D-36" W-48" H--19" Like to keep level with rear seats
as for freq id like to keep it in the low 30's sound good for 2 or 3 cvrs 12"?

is my amp in sig sufficiant to run 3 ported?

PokeFan
06-23-2008, 07:15 PM
Here you go
3cubes@33hz (http://img23.imageshack.us/my.php?image=3cubes33hz56sqin6nx.png)

Are you pushing them with the fosgate or the Alpines? The fosgate may be a bit to much for those. If they're 4ohms your running them at about 1.34 when wired which is about 1200 watts from that amp

rloring
06-23-2008, 07:41 PM
Here you go
3cubes@33hz (http://img23.imageshack.us/my.php?image=3cubes33hz56sqin6nx.png)

Are you pushing them with the fosgate or the Alpines? The fosgate may be a bit to much for those. If they're 4ohms your running them at about 1.34 when wired which is about 1200 watts from that amp


the rf

NissanKicker
06-23-2008, 08:42 PM
http://i214.photobucket.com/albums/cc75/NissanKicker/312portbox2.jpg

... 9.39cuft after sub/port displacement - Tuned @ 32hz

( 48"W x 30"D x 15"H )