Type R's in 5.7 cubes

[jake21]

how would 2 12" type r's sound in about 5.7 cubes, is that to much?

[bad_trip]

what's recommended for them?

[bad_trip]

also, we would need to know what vehicle it's going in, ported or sealed, tuning, amp, wiring, etc.

[regal8r]

type r's love a bigger box, tune it to about 35 hz with about 1500-1800 rms to both subs and should slam pretty nice

[01 S 10]

I've had experience with 2 R's in a little over 5 cubes tuned to 30hz with over 1000-1200 each and was loud as hell! but they will get stinky quick on low notes! :crap:

[dcole18]

between 5.4 and 5.8

tune 34-36hz

and do 35-40 square inches of port per sub

[01 S 10]

between 5.4 and 5.8

tune 34-36hz

and do 35-40 square inches of port per sub

Yes^^^ do that, with about ~2k total rms

[dcole18]

Yes^^^ do that, with about ~2k total rms

haha... ive built more type R boxes than i can count :crazy:

[jake21]

Ok well i did a few modifications to my box and it will be a total of 5.3 cubes. should i still tune it to about 34?

[Skip01]

BAH.......3.5 is fine enough

[dcole18]

Ok well i did a few modifications to my box and it will be a total of 5.3 cubes. should i still tune it to about 34?

yes... for some reason after i drop between 34hz output drops drastically on all the boxes ive made


bAH.......3.5 is fine enough
no :p:

[Skip01]

no :p:


If ya know what ya doin it is:)

[jake21]

yes... for some reason after i drop between 34hz output drops drastically on all the boxes ive made


I also noticed that with my previous box i built. It was around 32-33hz and i wasn't satisfied at all