looking to pay for box design.....

[GohillaAudio]

ok, i want to do a ported enclosure for 2 12" d4 Type R subs, i would like to pay someone who could do a GOOD design for me......

i would like double baffle/flush mount and most importantly flared port, both sides not important, but i do want the inner side of the port flared. must be no taller than 16" no wider than 48 and no deeper than 32 (that should be easy enough) it will be going in the cargo area of a 02 gmc yukon denali.

thanks guys!

[GohillaAudio]

subs require 1.25 to 1.75 and shooting for a good looking spl/daily box

[yunvme666]

how much ya wanna pay....lol... i actually have one made up that i think is about 1.75-2 per sub....

[ribeiro953]

slot ported or aero port? ill do it for 10$ using pro engineer

[GohillaAudio]

flared slot port

[GohillaAudio]

how much ya wanna pay....lol... i actually have one made up that i think is about 1.75-2 per sub....

how much you want?

preview?

[kovemaster559]

how much you want?

preview?

http://i20.photobucket.com/albums/b223/dakangofkrunk16/SubwooferEnclosure215s.jpg

[GohillaAudio]

no thanks, i want a flared slot port.....and i have no idea how to calculate a flared port

[unrated]

i just designed a 2 cube flare port box
its prob too small for what your after but i thought id through it in

[MikeyB]

Put those R's in 2.5 cube a piece, so 5 total, tuned to 32~34 with 60~70sq in of port total. (30~35 a piece) And give them some power (they will handle 1000wrms a piece in 2.5 cube daily, each)

What amplifier are you running?

^^^ With that power, that enclosure, and with a flared slot port on each side, you would be movin some air :p:

[GohillaAudio]

i just designed a 2 cube flare port box
its prob too small for what your after but i thought id through it in

whats it tuned to? i could use that design. and build a 2 chamber box