PDA

View Full Version : install i finished last night



350zspl
06-19-2008, 02:51 PM
http://havocaudio.com/forum/index.php?topic=243.0

bsean63
06-19-2008, 02:53 PM
wow thats clean, great job bro

350zspl
06-19-2008, 02:54 PM
Bsean63


very much appreciated

hemi=22s
06-19-2008, 02:54 PM
bout time u slacker :P

hows it sound guess i wil hear for my self at the show off sunrise

hemi=22s
06-19-2008, 02:55 PM
1 ? i think i know the answer but why u screw subs in crooked>

350zspl
06-19-2008, 02:55 PM
slow but steady

sounds louder drivers face foward

sounds deeper drivers face license plate

350zspl
06-19-2008, 02:56 PM
1 ? i think i know the answer but why u screw subs in crooked>


i always put them in diagonal

just my thing
no reason , just to be different

hemi=22s
06-19-2008, 02:57 PM
got ya thought maybe cause old screw holes= weak wood

he is going to the show right

350zspl
06-19-2008, 02:59 PM
yes Gene is going to show


trupan is fine no damage , again just mount them that way to be different

Cravingbass123
06-19-2008, 03:39 PM
i got a 3000d pro. its a beast on my treo ssx 18, and gives the sub a beating it deserves!!!!!!!

350zspl
06-19-2008, 03:42 PM
amp has plenty of juice

i really like them

small footprint as well

BIGsherm7272
06-19-2008, 03:47 PM
nice install, but if I were you, I would put some rubber cushions on those screws. You don't want that amp to take too much of a beating ;)

350zspl
06-19-2008, 03:48 PM
good advice and i will follow your advice and cushion the blows

SirJoseph8989
06-21-2008, 01:35 AM
how power hungry is that crunch amp...iv got two sittin here in my room im waitin to hook up nd wonderin how uv found urs so far??

350zspl
06-24-2008, 10:53 AM
i would think for 2 each

600 amp draw

you will need good electrical for 2 each

what is your current electrical status

pd8731
06-24-2008, 12:08 PM
how power hungry is that crunch amp...iv got two sittin here in my room im waitin to hook up nd wonderin how uv found urs so far??

Crunch amp is not power hungry whatsoever. Get a decent batt and you're set.


nice install, but if I were you, I would put some rubber cushions on those screws. You don't want that amp to take too much of a beating ;)

Don't mount the amp to the box. All the rubber mounting feet in the world won't protect it. It will eventually break. Mine did. A solder point broke in a matter of days with the same subs as the OP. I fixed mine, but he may not get so lucky. Take the amp off the box ASAP!

OoMesKoO
06-24-2008, 12:16 PM
all in all its a ****** install man!

Dont like the location of those voltmeters though. You should get them up on the dash somewhere.

350zspl
06-24-2008, 12:36 PM
^^^^^^^^^^ thank you very much ^^^^^^^^^^^^^^^

SirJoseph8989
06-24-2008, 01:51 PM
well i think i got enough...Iraggi 200alt, big three, yellow top under the hood, kinetik 2400 in the rear, nd a mix of kicker hyperflex nd KnuKoncept Kolossus 1/0 wires

350zspl
06-24-2008, 01:55 PM
should be good

install


run car , turn on AC, turn on head lights , crank volume , measure volt at amp on full tilt

350zspl
06-24-2008, 02:13 PM
Crunch amp is not power hungry whatsoever. Get a decent batt and you're set.



Don't mount the amp to the box. All the rubber mounting feet in the world won't protect it. It will eventually break. Mine did. A solder point broke in a matter of days with the same subs as the OP. I fixed mine, but he may not get so lucky. Take the amp off the box ASAP!


i will bulld amp rack and remove GP3000 from enclosure
thanks
will do

kovemaster559
06-24-2008, 02:16 PM
nice install did you seal the trunk off>?

350zspl
06-24-2008, 02:21 PM
waiting to meter it on the 6th before i seal it


sounds deeper drivers face back

sound like it may be louder face forward

SirJoseph8989
06-25-2008, 05:27 PM
aight thanks man, nice install btw...g/l with the meter

RipDaJacka
06-25-2008, 05:30 PM
cool

Hintzyboy
06-25-2008, 05:33 PM
Looks kinda sloppy to me. But it should clean up some when you build the amp rack.