PDA

View Full Version : Another Aeroport Thread



Go2Sleep
06-19-2008, 02:46 AM
So I've got a lot of different input about flared ports for my new setup..

(2)15 Bls
Box: 17x39x22 = 6.54cubes (after displacement)

Will (2) 6in ports be too much port area?

Plugged into psp calculator i got the lengths but i ran into a problem because my box depth is 22" and according to this i got Flare Length Port required 19.37

i read something that if the port is 6" you need it to be 6" from the back of the box. So do i need to take another route?

jmanpc
06-19-2008, 02:46 AM
nah, should be nice.

profundus-sanus
06-19-2008, 02:47 AM
definately not too much.

Go2Sleep
06-19-2008, 03:19 AM
ORIGINAL POST UPDATED...

also
I seen these psp ports on partsexpress for sale:
http://www.partsexpress.com/pe/showdetl.cfm?Partnumber=268-354

Any other options though my funds are running low.

Go2Sleep
06-19-2008, 01:41 PM
ttt

KCha
06-19-2008, 01:45 PM
I've had ports as close as 1" away from the back wall and didn't notice any noise/air flow difference than when it was changed around. They were 4" ports fwiw

kovemaster559
06-19-2008, 01:47 PM
ORIGINAL POST UPDATED...

also
I seen these psp ports on partsexpress for sale:
http://www.partsexpress.com/pe/showdetl.cfm?Partnumber=268-354

Any other options though my funds are running low.

make your own port . 6 inch regular port ,pvc tube, glue ,bondo. Ive did that it worked preety good . not to bad for 6 dollar ports