View Full Version : need ported box design - paypal

06-17-2008, 08:54 PM
ok i need a ported box design for 2 12" square l7's in the back of my bed
UMMM $ 10 Bux p/p ?

29-30 herz
5 cubic feet (after mdf /port/sub displacement)
3/4 mdf
need the measurements of each piece

(edit) did some changing on the numbers with what i have below its 7.22222 ft³ so if you can make it smaller with the specs above that would be great(/edit)

max width 48" (could be played with)
Would like to keep max height 13" - lower the better i wanna put my amp on top (just thought about it that isnt tall enough for the subs so play with it just maybe small incriments)
depth would like to keep under 20"

and the port hole/ part sticking into cab needs to be somewere around 12 high maybe 24 wide (outter dimensions)

heres kinda an idea i had for the layout just a fast paint shop


06-18-2008, 10:32 AM
bump? no takers?

06-18-2008, 10:45 AM
don't think there is anybody online right now that draws up the enclosures.....bump again a little later

06-18-2008, 10:49 AM
You have a PM.

06-18-2008, 11:05 AM
you need to give up a little more room somewhere, if you want 5 cubes net.

plus you won't fit the woofers in there with 13" height. 14" height should be enough...

06-18-2008, 11:27 AM
psych0ticnemes1 - pmed back and if needed the height can be played with 1-2 inches

profundus-sanus - Thanks for pointing that out..