PDA

View Full Version : Fi q 12inch sealed box



dpu2014
06-17-2008, 10:53 AM
Ok Im building a box for my FiQ 12. After driver displacement it will have 1.5 cu. ft. of room which is perfect. Ok But I cant decide If I should downfire or upfire. Also How do I prevent the subs from smacking the ground or the underside of the seat. It Is going under the backseat of a truck.

hemi=22s
06-17-2008, 10:55 AM
leave a gap between the sub and the seat/floor

dman4486
06-17-2008, 10:59 AM
leave a gap between the sub and the seat/floor

:laugh:

dpu2014
06-17-2008, 11:03 AM
Will an inch work? And will upfire or downfire sound better? Or will it not really matter?

dman4486
06-17-2008, 11:05 AM
under a seat in a truck, you will want a downfire setup....you need to have plenty of space between the sub and floor....the q will probably need more than 1 inch

GearGuy2001
06-17-2008, 12:52 PM
The Xmax on a 12" Q is 27mm which is darn close to 1", So I would take a guess and say you want a buffer area like 2,3,4" between the sub and the floor

dpu2014
06-17-2008, 02:23 PM
The Xmax on a 12" Q is 27mm which is darn close to 1", So I would take a guess and say you want a buffer area like 2,3,4" between the sub and the floor

yea i was actually just looking at that. I only have room for 2 inches so that is what Ill go with. Also will i need the bp power upgrade if im only givin em 1100 watts?