PDA

View Full Version : Need a box design, have $10 in paypal



Pickler
06-12-2008, 03:59 AM
So I need a box design for my 18" Fi Q in my 05 equinox. These are the dimensions I would like to use, and the width and length are max, but there is still more room in the height but then it will go above the backseat and I would rather have it not. The dimensions are 34Wx26.5Dx20H
W=Width
D=Depth
H=Height


If possible I would like to have cutsheets made as well, but if not its fine.

Also tuning from 28-30 should be fine

vehementSPL
06-12-2008, 04:18 AM
I private messaged you. check it out

NissanKicker
06-12-2008, 05:20 AM
This should get nice, deep, & low.

6.4cuft Tuned @ 30hz

I PMing you now

NissanKicker
06-12-2008, 05:41 AM
Using the measurements that you gave.
34" x 26.5" x 20" That's 10.4cuft Externally

It's 32.5" x 25" x 18.5" - Internally ( 8.67 - 8.7cuft )
... After the port displacement (1.8) and an estimated .5 sub displacement. It's 6.4 cuft internally.

The cutouts are:

Top: 34" x 26.5" x 20"
Bottom: 34" x 26.5" x 20"
Front: 28" x 25" x 18.5"
Back: 34" x 25" x 18.5"
Side1: 25" x 18.5"
Side2: 25" x 18.5"
Port: 6" x 18.5" x 42"
* Go back 19.75" D, then bend left 22.25" - Keep 6" between the port and enclosure walls *

( Sub and Port on front )

Pickler
06-12-2008, 05:45 AM
Oh man i hope that 6.4 cufeet internally is enough, do you know what the tunage will be on that and would you recommend any internal bracing?

NissanKicker
06-12-2008, 06:07 AM
Since the port is wrapping around, personally, I wouldn't.
... You could always double baffle the front.

Make a partial faceplate: 28" x 20" - This will cover the entire front except the port.

Pickler
06-12-2008, 07:32 AM
Well I downloaded google sketchup and tried to make a sketch, i had to adjust the dimensions because i wasn't sure exactly on if i could make a 3/4 inch think line but is this generally how it should look? and i wasnt sure on if you designed it to be sub up or sub back so i didn't add the hole in.
http://img.photobucket.com/albums/v284/mutantpanda720/boxpic.jpg

Pickler
06-12-2008, 06:45 PM
Well I guess I am still looking for a design

NissanKicker
06-12-2008, 10:49 PM
Sub is in the front ( Like the port )

ngsm13
06-17-2008, 12:11 AM
Using the measurements that you gave.
34" x 26.5" x 20" That's 10.4cuft Externally

It's 32.5" x 25" x 18.5" - Internally ( 8.67 - 8.7cuft )
... After the port displacement (1.8) and an estimated .5 sub displacement. It's 6.4 cuft internally.

The cutouts are:

Top: 34" x 26.5" x 20"
Bottom: 34" x 26.5" x 20"
Front: 28" x 25" x 18.5"
Back: 34" x 25" x 18.5"
Side1: 25" x 18.5"
Side2: 25" x 18.5"
Port: 6" x 18.5" x 42"
* Go back 19.75" D, then bend left 22.25" - Keep 6" between the port and enclosure walls *

( Sub and Port on front )

Displacement on a single 18" is NOT .5cubes.

r-tard.

nG

morgans432
06-17-2008, 12:12 AM
poor kid has been getting torn up lately i guess thats what happens when your a little special

kovemaster559
06-17-2008, 12:14 AM
Displacement on a single 18" is NOT .5cubes.

r-tard.

nG

Are You always on your RAG GSM

ngsm13
06-17-2008, 12:18 AM
Are You always on your RAG GSM

Nope.

You must be thing of that ***** of a mother you popped out of... now run along little boy. Heard when her gash flows it's like the bloody nile river, might wanna get you a douche canoe.

nG

NissanKicker
06-17-2008, 08:55 PM
For you info... *** a$$.
... I know that a single 18 isn't goin' to be .5ft3.

I did that to give him alittle more box volume... Plus the tuning of the box isn't goin' to be that low ( Since it's actually not .5 ... more like .16 - .23 )... Tuning is goin' to be ~32hz... Which I prefer to use with this particular sub ( Brand that is ). I had an 18" FI Q in my 4 runner, 7cuft. @ 33hz...

So STFU! Before you bash someone... bash yourself.

And I'm glad to see that you're boning YOUR mom on your AVATAR. Keepin' it in the family, eh? Good job buddy.

ngsm13
06-18-2008, 01:41 AM
For you info... *** a$$.
... I know that a single 18 isn't goin' to be .5ft3.

I did that to give him alittle more box volume... Plus the tuning of the box isn't goin' to be that low ( Since it's actually not .5 ... more like .16 - .23 )... Tuning is goin' to be ~32hz... Which I prefer to use with this particular sub ( Brand that is ). I had an 18" FI Q in my 4 runner, 7cuft. @ 33hz...

So STFU! Before you bash someone... bash yourself.

And I'm glad to see that you're boning YOUR mom on your AVATAR. Keepin' it in the family, eh? Good job buddy.

You're slacking. Need to work on YOUR grammar, and english I guess. It's very clear that I'm humping YOUR mother... she's a big *****...

nG

NissanKicker
06-18-2008, 08:02 AM
How i'm looking at in... it says " Your mom "....
... As far as yours goes... I rode that all the way back to cincinnati. I'm happy to say you finally got off her. Thought I was goin' to call the Domestic Abuse Hotline for Incest. Close Call...

Pickler
06-18-2008, 02:59 PM
I already got a design btw :fyi: