PDA

View Full Version : Enclosure question....



NissanKicker
06-11-2008, 03:48 AM
I really haven't had experience with a round port... Beside those " Push/Pull " Enclosures....

So this is my first build with the infamous " Aero "....

The dimensions of the enclosure (1) 12" Treo TSX 12.44

38"L x 18"W x 14"H ( 4.3cuft )

Port 24.75" Opening x 11" Deep
* If I did the input right it's: 7.8" Diameter x 11" Deep ( I rounded to 8" )

Port Tuned: ~38

With the sub displacement, port displacement... It comes out to be ~3.45 internally ( Needed 3.3 - Alittle bigger never hurt. )

Now question:
... Sure I keep the Aero as is, INTERNAL...
Or should I use Externally?

If so, how would I go about doin' that... ( I'm in a trunk car... So designing an externally flared port enclosure of this degree seems alittle tricky. ( Unless I somehow " bend " it, the port that is ).

ANY & ALL HELP WILL BE APPRECIATED

NissanKicker
06-11-2008, 03:02 PM
NEED HELP!..... Like seriously.
... Tell me if I inputed the opening wrong... Maybe it's 5" x 11"Deep and not 8" x 11"Deep

... I really don't know or have experience with circle ports.

NissanKicker
06-12-2008, 01:02 AM
I figured everything out....
.... END THREAD!