PDA

View Full Version : 2 12" type r



hittin_hard
05-21-2008, 08:03 PM
im wantin to put 2 12's in my trunk but still have some trunk space. im wantin to go ported if possible. the trunk height is only 14" and no more than 25" in width. its so small cause of the openings getting into it. if i could at least get one ported box up against the back seat and then have a sealed box where the spair tire goes that'd be great. so the ported box i would like to be somewhat thin with the vent comin out the top. mounting depth is about 8 inches.

Joseph M
05-21-2008, 08:06 PM
what kind of car is this? if the spair is located on the bodium u can pull it out and gain more room.

miker
05-21-2008, 08:08 PM
Holy **** ****er..

This is a terrible idea..

hittin_hard
05-21-2008, 08:08 PM
chevy cobalt

miker
05-21-2008, 08:11 PM
Yeah.. no way.. at all that you are fitting two ported..

probably not even two sealed..

Just do 1 ported...

hittin_hard
05-21-2008, 08:12 PM
if i could get one ported, i'd like for it to be somewhat small. i know that's hard since it'd be a ported box. but theres gotta be a way i can get 2 sealed in there

miker
05-21-2008, 08:21 PM
Well.. With 14" of depth, you would get around 3cubes.. minus sub displacement, and box walls...

so more like 2.5..


Now.. if you had 19" of depth to work with, and had a little over 3 cubes net.. that would be great..

And for ported, the box (for ONE sub) would be the same size as a sealed one for two subs.

hittin_hard
05-21-2008, 08:29 PM
so what would the overall dimensions be for the 2 sealed??

hittin_hard
05-21-2008, 08:30 PM
and that'd be with the least depth as possible

miker
05-21-2008, 08:39 PM
Alright..

Tell us what kind of depth you have to work with. (make sure that the box can still slide in)

hittin_hard
05-22-2008, 12:03 AM
at least 10 or 11 inches

miker
05-22-2008, 12:35 AM
NO WAY... maybe one sealed.. lol