View Full Version : 2 12" type r

05-21-2008, 08:03 PM
im wantin to put 2 12's in my trunk but still have some trunk space. im wantin to go ported if possible. the trunk height is only 14" and no more than 25" in width. its so small cause of the openings getting into it. if i could at least get one ported box up against the back seat and then have a sealed box where the spair tire goes that'd be great. so the ported box i would like to be somewhat thin with the vent comin out the top. mounting depth is about 8 inches.

Joseph M
05-21-2008, 08:06 PM
what kind of car is this? if the spair is located on the bodium u can pull it out and gain more room.

05-21-2008, 08:08 PM
Holy **** ****er..

This is a terrible idea..

05-21-2008, 08:08 PM
chevy cobalt

05-21-2008, 08:11 PM
Yeah.. no way.. at all that you are fitting two ported..

probably not even two sealed..

Just do 1 ported...

05-21-2008, 08:12 PM
if i could get one ported, i'd like for it to be somewhat small. i know that's hard since it'd be a ported box. but theres gotta be a way i can get 2 sealed in there

05-21-2008, 08:21 PM
Well.. With 14" of depth, you would get around 3cubes.. minus sub displacement, and box walls...

so more like 2.5..

Now.. if you had 19" of depth to work with, and had a little over 3 cubes net.. that would be great..

And for ported, the box (for ONE sub) would be the same size as a sealed one for two subs.

05-21-2008, 08:29 PM
so what would the overall dimensions be for the 2 sealed??

05-21-2008, 08:30 PM
and that'd be with the least depth as possible

05-21-2008, 08:39 PM

Tell us what kind of depth you have to work with. (make sure that the box can still slide in)

05-22-2008, 12:03 AM
at least 10 or 11 inches

05-22-2008, 12:35 AM
NO WAY... maybe one sealed.. lol