PDA

View Full Version : Port placement.



bass-aholic
05-21-2008, 06:52 PM
How far is the least you could get away with having a port in an SUV from the back hatch? Sub up port back situation. I think i may be suffocating the port on my new enclosure and might have to change up where everything is located so the port can breathe more.

dumpin907
05-21-2008, 06:53 PM
like 5-6 inch

adas
05-21-2008, 11:13 PM
At least the same width of the port IMO

bass-aholic
05-21-2008, 11:18 PM
At least the same width of the port IMO

:wow: My ports 24" wide. I can only squeeze maybe 10 inches if i find a new place for the batteries so the box can slide up against the back of the seats. Theres no way i can get near 24" of room.

SPY
05-22-2008, 11:09 AM
Your port is 24x24???

Use the smaller side of your port and space it at least that far away from the hatch. The more distance the better.

ExpoSport
05-22-2008, 11:15 AM
i read i believe that it should be the distance of the samllest side of the port. if it's closer, it'll lower the tuning of the box a little

MikeyB
05-22-2008, 11:29 AM
The distance of the port width, or it sounds like in your case, the ports height if your running the port crx style.

bass-aholic
05-22-2008, 04:37 PM
Oh the port height. My port is 5" high by 24" wide. So should i give it 5 inches of room or just try and relocate the batts and give it the full 10"?

MikeyB
05-22-2008, 04:43 PM
Atleast 5inches and you should be fine. I would shoot for more than that though ideally....if you can get more than definately do so