PDA

View Full Version : Help with a box design for an APX15



dumpin907
05-19-2008, 03:05 PM
Sub is an atomic apx15.
Looking for a new box design from someone with more experience than me.
Max dimensions are.. 40L x 20H x 25D
Looking to be tuned to about 33Hz.
This is going into a jeep cherokee.Sub up port back.
Anyone willing to help please post in this thread or PM me.

*DETAILED SPECS*
*eXTREME SPL competition woofer
* high sensitivity, extreme efficient motor to ensure high SPL possible
* Rigid Die cast aluminum basket
* Organic long fiber non-pressed cone body for accurate tight bass
* Highly damped Kevlar reinforced cone body
* Extended neck joints on cone, coil and spider strengthen the integrity of moving structure for high power capacity
* triple layers foam surround increase the power capacity of woofer.
* Compressed mounting ring gasket
* vented coil for extra heat dissipation
* 3 inch high temp aluminum voice coil
* extended, machined cut one piece back plate
* Powerful 1 inch thick 90 oz high energy magnet
* over 2-1/2 inch long excursion motor structure
* reinforced resin impregnated polycotton spider extend the life span of the speaker from material fatigue and collapse.
* integrated heavy duty lead wire on spider prevent short circuit and melt down
* dome shape dust cap design
* low carbon front and back plate
* Vented magnetic gap technology
* Laser etched, machined and chromed back plate
* handle up to 25,000Watts in 3 second short burps
* custom matching impedance to amplifiers

-Thanks.

djman37
05-19-2008, 03:07 PM
Looking for a new box design from someone with more experience than me.
Max dimensions are.. 40L x 20H x 25D
Looking to be tuned to about 33Hz.
This is going into a jeep cherokee.Sub up port back.
Anyone willing to help please post in this thread or PM me.

*DETAILED SPECS*
*eXTREME SPL competition woofer
* high sensitivity, extreme efficient motor to ensure high SPL possible
* Rigid Die cast aluminum basket
* Organic long fiber non-pressed cone body for accurate tight bass
* Highly damped Kevlar reinforced cone body
* Extended neck joints on cone, coil and spider strengthen the integrity of moving structure for high power capacity
* triple layers foam surround increase the power capacity of woofer.
* Compressed mounting ring gasket
* vented coil for extra heat dissipation
* 3 inch high temp aluminum voice coil
* extended, machined cut one piece back plate
* Powerful 1 inch thick 90 oz high energy magnet
* over 2-1/2 inch long excursion motor structure
* reinforced resin impregnated polycotton spider extend the life span of the speaker from material fatigue and collapse.
* integrated heavy duty lead wire on spider prevent short circuit and melt down
* dome shape dust cap design
* low carbon front and back plate
* Vented magnetic gap technology
* Laser etched, machined and chromed back plate
* handle up to 25,000Watts in 3 second short burps
* custom matching impedance to amplifiers

-Thanks.


what sub is this???
Number of subs?
Size?
any real specs, T/S parameters?

dumpin907
05-19-2008, 03:08 PM
Atomic Apx15

djman37
05-19-2008, 03:09 PM
Atomic Apx15

thread title > me.

dumpin907
05-19-2008, 03:10 PM
you got any ideas?

djman37
05-19-2008, 03:11 PM
you got any ideas?

looking for sub specs now.

djman37
05-19-2008, 03:13 PM
box specs from:

http://www.atomicspeakers.com/productinformation/loudspeaker/apocalypseX/APX15D.html

6.0ft3 (40si x 12" long) (31Hz)=2500w (SPL)
6.0ft3 (120si x 2" long) (65Hz)=2500w (SPL)

dumpin907
05-19-2008, 03:18 PM
alright thats a start