PDA

View Full Version : Box for jbizzle



mlstrass
05-12-2008, 08:10 AM
Didn't take any build pics as I didn't have time, but got a few of the finished product. Box is 4.7^3 @ 35hz with 62^2 of port. Double baffle, braced, and 45's in the corners. Black carpet and gray fleckstone port. Nothing too fancy, but it came out pretty nice. Subs are 12" MTX 9500's and it slams VERY nicely. He had a single 12 in a Sledgehammer box before. I read that they're tuned to around 45Hz and I believe it as it was a fart box for sure.

New set up is 100x better on the lows and sounds way better.

http://img120.imageshack.us/img120/2210/1001990qf8.jpg

http://img120.imageshack.us/img120/8472/1001994zq3.jpg

http://img120.imageshack.us/img120/7774/1001995zo6.jpg

http://img120.imageshack.us/img120/5183/1001996ot5.jpg

http://img120.imageshack.us/img120/5568/1001997dr4.jpg

http://img120.imageshack.us/img120/1333/1001998cu8.jpg

http://img120.imageshack.us/img120/8420/1001999ro1.jpg

http://img120.imageshack.us/img120/2087/1002002ld9.jpg

na_rsx
05-12-2008, 10:30 AM
nice ****, looks like you went with some better carpet material, nice logos!!!

tez4life
05-12-2008, 10:55 AM
Beautiful work Mike, as always. I like the simple, clean look of that box.

mlstrass
05-12-2008, 11:11 AM
nice ****, looks like you went with some better carpet material, nice logos!!!

Got tired of the stuff from Wal Mart, too many wrinkles in it, so I got a bunch from Parts Express. Nicer to work with also...

jco1385
05-12-2008, 11:13 AM
Beautiful work Mike, as always. I like the simple, clean look of that box.

x2. really clean. how'd you do the logos?

btw tez, when do you want that demo?

na_rsx
05-12-2008, 01:21 PM
Got tired of the stuff from Wal Mart, too many wrinkles in it, so I got a bunch from Parts Express. Nicer to work with also...

yeah, well awesome work dude.

jbizzle
05-12-2008, 01:48 PM
hes amazing :D

mlstrass
05-12-2008, 03:09 PM
logos are 1/4" MDF. Found something online, resized it and printed it out. Then cut out by hand with a razor blade, traced onto the MDF and used a scrolling jigsaw. Once done I just used glue/nail gun to attach them. Took about 2 hours to make them, but I really like the look and it looks better in person...

jbizzle
05-12-2008, 06:11 PM
bump :p

bigbangtheory
05-12-2008, 06:17 PM
Looks good! Came out almost as good as my MTX emblems when I had my protege5. ;)

jbizzle
05-12-2008, 06:19 PM
have any pics?

BigJoker
05-12-2008, 10:24 PM
looks good.

jbizzle--- ditch the cap. get a Deka for the rear. my friend has a 04 Envoy. so if you need help with stuff he can help you out. where are you from? i stay by Midway Airport.

jbizzle
05-12-2008, 10:37 PM
I took off the capacitor today, please read my other thread i'm dying from voltage. i'm at ohair airport

http://www.caraudio.com/forum/showthread.php?p=4599563#post4599563

BigJoker
05-12-2008, 11:23 PM
in my friends Envoy he has a Deka up front and a deka in the rear. big 3. and he was running his autotek 4000 and it had slight voltage drops with the stock alt.

he had to send his ho alt to get service.

Sleepy_Jr
05-13-2008, 04:58 AM
Mike did Awsome job on your box. :2thumbs:

babaganoush123
05-13-2008, 05:03 AM
nice.

jbizzle
05-13-2008, 07:14 PM
thanks

Orion Man
05-13-2008, 09:27 PM
Nice job on the box! Not an MTX fan but I would definately rock those!

jbizzle
05-13-2008, 09:54 PM
they're pretty good :D

jbizzle
05-14-2008, 06:10 PM
bump :D