View Full Version : Just finished 91 legend install

05-08-2008, 02:23 AM
This is not exactly a build log but didn't know where to put it. Mods move if you feel necessary.

What is in car:
Kx2500.1 @ 4 ohms
Kx350.4 @ 4 ohms x 2
PG RSD 6.5 comps
Kinetik 1800
Audioque hdc3 18D2

The sub box is just temporary. I am saving money for a second 18 HDC3 so i can run both of them off of the kx2500.1 at 2 ohms. Should get pretty loud as the 1 18 does pretty good off about 1300 watts.

Although this is not a build log, I will keep track of my work when the second 18 arrives. Let me know if you have any suggestions.

bumpin buick
05-08-2008, 02:26 AM
looks great, clean job and that sub looks crazy

05-08-2008, 02:29 AM
I like the battery box.

05-08-2008, 02:37 AM
Nice work man . Whats the cu/ft of the box?

05-08-2008, 02:38 AM
right around 8 cubes at 37hz. Tuned a little high for my tastes but this is just temporary.

05-08-2008, 02:44 AM
thats a large box. is it on the seat or is the seat removed? good job so far

05-08-2008, 02:45 AM
oh yeah, why not run the sub at 1 ohm?

bumpin buick
05-08-2008, 02:46 AM
what do you plan on doing for the pair? no way you will get 16 cubes there will ya?

05-08-2008, 02:55 AM
The seat is pulled out. The amp is not 1 ohm stable so im not trying to push it. Amp will be ran at 2 ohms when i get the second sub.

The box is definitely large. The sub does not need 8 cubes. I can fit a 12 cubic foot box in the back no problem....oh yeah and its going to be a wall :)

05-08-2008, 02:56 AM
dude, I've run 3 kicker amps at 1ohm, they can take it, especially since you have that extra batt in the back. I'm sure those aren't under warranty either so drop it down to 1ohm, it shouldn't go into protect

05-08-2008, 03:12 AM
do you not fuse the wires coming off the 2nd battery?

JL Audio
05-08-2008, 03:25 AM
if you don't have the box done like in the picture, i'd try to fill the hole from drilling with woodglue or anything you had handy just for the heck of it. Nice NICE sub :). Maybe me want to get one and I am trying to go smaller lol..

JL Audio
05-08-2008, 03:26 AM
do you not fuse the wires coming off the 2nd battery?

they are very close to his amp.

Lil Poot
05-08-2008, 03:28 AM
that amp will take 1 ohm no problem :fyi:

05-08-2008, 03:35 AM
do you not fuse the wires coming off the 2nd battery?

Holy ****. This dude's right. I knew something was missing. I fused before 2nd battery but not before the amp. Luckily I havent really been listening to it but i'll have to do that tomorrow for sure....THANKS

05-08-2008, 03:36 AM
that amp will take 1 ohm no problem :fyi:

yeah, the greatestpenn informed me ha. What kinda power would it even put out?...****. I wish i knew this before i bought D2 subs

05-08-2008, 03:41 AM
Are the kx2500 more stable at 1ohm then the zx2500?

05-08-2008, 03:44 AM
I don't know for sure and you're probably not asking me but im pretty sure there is no difference as far as stability

Lil Poot
05-08-2008, 03:44 AM
they're basically the same amp, different case, both do 1 ohm np. from what i understand though, they dont do a whole lot more at 1 than they do at 2.

05-08-2008, 02:50 PM
alright... good info. I think ima drop it down to 1 ohm.. This sub has copper coils so lets just hope it doesnt start to stink

05-08-2008, 06:30 PM

05-08-2008, 07:21 PM
ill get up a vid in a couple weeks... Ill also actually make a build log.

05-08-2008, 10:56 PM
That looks good bud, im ordering two 18" D2 HDC3s and thats my kicker kx2500.1 you bought from me !!!!! LOL :)-

05-23-2008, 10:43 PM
updates? How does the sub sound, how much power is that amp putting out to it at 4 ohms? Have you had a chance to get it metered?

05-25-2008, 03:15 AM

05-25-2008, 06:03 AM
Is the box bolt down in any manner? Could be pretty dangerous.