View Full Version : Enclosure design..anyone? willing to pay a small fee
alex5857
05-07-2008, 09:17 PM
lets not go OD with the price either :D
here are my dimensions in my trunk of a 00 mustang. i want it ported.
13.5 Inches height at the front, the highest it can be. its 13.5 inches high for 6 inches deep into my my trunk, then it decreases by .5 inch for the next 10.5 inches to a finial height of 8 inches.
it can be up to 40 inches long <---->
and 16.5 inches deep into the trunk.
i might allow longer if necessary but i'd prefer not to, and this is for two 12's who need 1.5 cubic feet each ported.
http://www.polkaudio.com/caraudio/products/db124/
those are it.
thanks!
psych0ticnemes1
05-07-2008, 10:16 PM
Dough! Misread... I'll try to help you out tomorrow if I have time.
BuckyBoy
05-07-2008, 10:19 PM
Sealed or ported?
Read.
HellsRise
05-07-2008, 10:21 PM
You might want to make sure you can fit a 40" wide box into your trunk...I realize you have the width but does your trunk open that wide? I just built a box for a friend and ended up having to pull the back seats and do a few other things in order to get the box to fit because the trunk didn't open big enough.
BuckyBoy
05-07-2008, 10:28 PM
You get 3.43 before any displacements, so after subs and port, you won't have 1.5 for each of them.
http://i251.photobucket.com/albums/gg294/SMCustomz/SM%20Customz/34mustang.jpg
benchambers80
05-07-2008, 10:31 PM
I seen those mustangs, you might need to do an in trunk build
alex5857
05-07-2008, 10:31 PM
You might want to make sure you can fit a 40" wide box into your trunk...I realize you have the width but does your trunk open that wide? I just built a box for a friend and ended up having to pull the back seats and do a few other things in order to get the box to fit because the trunk didn't open big enough.
you know what your right, i didn't even think about that, and i wouldn't be able to pull the seats out and its a drop top, i have a extra wall between the seats and the trunk, ill have to rework the dimensions.
alex5857
05-07-2008, 10:34 PM
You get 3.43 before any displacements, so after subs and port, you won't have 1.5 for each of them.
http://i251.photobucket.com/albums/gg294/SMCustomz/SM%20Customz/34mustang.jpg
if you make it about 35inches long how many cubic feet would it have?
BuckyBoy
05-07-2008, 10:36 PM
2.99ft^3
IDSkoT
05-08-2008, 08:07 PM
Any build worth a d*mn you have to do an in-trunk build for Mustangs... it's ridiculous how small the trunk opening is.
miker
05-08-2008, 08:16 PM
Any build worth a d*mn you have to do an in-trunk build for Mustangs... it's ridiculous how small the trunk opening is.
:rolleyes: what if the subs doesn't need much airspace