PDA

View Full Version : MDF vs Plastic... SQ?



bterz
05-05-2008, 04:37 PM
hey guys im installing some components in my truck and I pulled my original 5x7s out of the front and cut the plastic they were originally in in order for my 6.5s to fit snug.

There is an airgap around the sides obviously and I plan on putting dynamat over it. My original reason for putting it in the plastic is because I didnt have any MDF or wood tools last night, but I think it came out good because not it fits under my door panel where it originally wouldn't.

My question is, am I sacrificing SQ by putting them in the plastic rather then MDF. Do they need to have a tight seal around the speaker??

Thanks in advanced u guys are all super helpful

dragnix
05-05-2008, 04:38 PM
I don't think components need to be enclosed in MDF to work well. But a tight seal might help

helotaxi
05-05-2008, 05:08 PM
The seal will matter for the midbass. There is no reason to use MDF though.

bterz
05-05-2008, 05:09 PM
Thank you much guys.
I'll let you know how it turns out :D

jibberjive
05-06-2008, 05:52 AM
Yeah seal it off as good as you can. As long as it's solid, it doesn't necessarily need to be MDF