PDA

View Full Version : Box Design for RE MT 15" Please Help



mike11202
05-02-2008, 05:19 PM
If possible could someone design a box for a RE MT 15"?

Max Dims.

34w x 16h x 20d

Tuned to about 34hz or so.

Thanks a lot, Mike.

PM me for price please, I'd like pretty experienced designers in this area. It's going in a 07 civic coupe trunk.

profundus-sanus
05-02-2008, 05:23 PM
planned power?

also are you planning on leaving your seats folded down?

mike11202
05-02-2008, 05:25 PM
planned power?

around 3,000 watts

my AB 200.1 does 3,000 @1ohm and it will be running at .7ohm.

mike11202
05-02-2008, 05:26 PM
also are you planning on leaving your seats folded down?

If I need to I could. But it will be my daily driver so sometimes I will have people in the backseat.

profundus-sanus
05-02-2008, 05:28 PM
well, you plan on doing comps at all?

mike11202
05-02-2008, 05:32 PM
well, you plan on doing comps at all?

I can't this summer since I'll be lifegaurding on the beach, so this will be strictly for daily driving.

I would like to build another for an SPL box but that will come later this month.

profundus-sanus
05-02-2008, 05:41 PM
well, i prefer doing sub forward port side for trunk cars...

how's this? I've built about 3 box's for 15 mts. they don't like HUGE box's.. this is 3.75 @ 34.5hz w/ 58" of port

all my talk is from my own building experience..

http://i33.photobucket.com/albums/d55/ratherbriding99/mt15.png

mike11202
05-02-2008, 05:45 PM
that looks great! whats the specs of the port on that box?

profundus-sanus
05-02-2008, 05:51 PM
double baffle, port is 14.5 x 4 ". terminates 4" from the back edge of the box. 45 is 3 5/16( a hair of 3 1/4)

i give exact 45 measurements because there there to maintain port width through a bend.

mike11202
05-02-2008, 05:54 PM
double baffle, port is 14.5 x 4 ". terminates 4" from the back edge of the box.

Alright so front double baffle, give the port a 4" opening.

Thanks a lot man, I'll try and get this finished and posted back up here this weekend hopefully.

profundus-sanus
05-02-2008, 05:57 PM
i ninja edit also :fyi:

also, i take donations... :D
i don't require payment, but if you feel my services were worth some monetary value to you feel free.

mike11202
05-02-2008, 06:05 PM
PM me your paypal. I'll get it out tomorrow.

I came up with this cut sheet

Bottom: 20 x 33
Top : 20 x 33
Front : 14.5 x 31.5 (2)
Back : 14.5 x 31.5
L Side : 14.5 x 13.75
R Side : 14.5 x 17.75

Port L : 14.5

profundus-sanus
05-02-2008, 06:52 PM
here's a cutsheet thats the same as the sketchup

top/bottom 20x33
baffle (x2) 33x14.5
back 32.25x14.5
left 13.75x14.5
right 18.5x14.5
port 27.5x14.5
45 3 5/16 x 14.5

sixfootman2005
05-02-2008, 06:58 PM
hmmm i might have to look into this...i'm looking to build a box for my 15 mt real soon for my taurus sho trunk