PDA

View Full Version : 4 or 6 15's



mcbuggin
04-30-2008, 03:01 PM
well a guy I know wants to put 6 15's in a 94 accord in a wall. I suggested doin 4 with a port on the drivers side. I don't think that 6 will even fit. So if anyone has an opinion for this SPL vehicle then lets hear it.
thanks:D

tez4life
04-30-2008, 03:03 PM
I would suggest (4) ported too. It should be plenty of room, and (4) of **** near any 15" ported in a wall in a Accord should get plenty loud.

craigzter
04-30-2008, 03:08 PM
i agree

DBDRAGGUY
04-30-2008, 03:12 PM
x2 on the 4.
I dont see 6 fitting properly. even if it fits you wont be able to properly port them. Best bet would be 3 with a stupid amount of port area. 3 in the correct amount of are> 6 crammed into a wall for looks.

bluelceii
05-01-2008, 05:11 AM
6 15s CAN be prted if done right... so can 8 :up2somet:

MisterGrubbs
05-01-2008, 06:02 AM
6 15s CAN be prted if done right... so can 8 :up2somet:



In a freaking Accord?

I want proof!

bluelceii
05-01-2008, 06:49 AM
In a freaking Accord?

I want proof!

well add 4 type Rs to my setup and ill show you. :D nah.... it can be done dude... like most have said.... lottttts of time and tweakin... it CAN be done...

mcbuggin
05-01-2008, 05:38 PM
In a freaking Accord?

I want proof!

X2 like pics maybe

galacticmonkey
05-01-2008, 06:03 PM
You could probably do 6 15s. I dont see why not. Build it inside the car and you shouldnt have any problems.

If you have 6 15s you dont need a crazy amount of port area.

dman4486
05-01-2008, 06:08 PM
I don't think you will have enough space for the enclosure required for 6 15"s and the port...won't believe it until I see an install with the proper volume enclosure

bluelceii
05-01-2008, 07:24 PM
oh i dont have but 4 in mine... but im using the trunk AND the backseat for my enclosure... 12.228 cubes @ 34Hz with 112 sq in of port and i can still see outta my back window... :veryhapp:

mcbuggin
05-02-2008, 08:16 AM
ok now he is set on inverting the subs so we can all see the motors. now I have never done this but have heard that you need to change the phaseing is this true or not?
thanks

audioarsonal
05-03-2008, 12:35 PM
You could run 6 sealed??

chinxtaboi
05-03-2008, 02:24 PM
6 15" BTLs in a lexus gs and ported.

http://youtube.com/watch?v=HonVeNrAVYE&feature=related

http://youtube.com/watch?v=jYqIqdiaz_o

SethPhillips
05-15-2008, 04:51 PM
ok now he is set on inverting the subs so we can all see the motors. now I have never done this but have heard that you need to change the phaseing is this true or not?
thanks

yes.. true..

i want to see this too since he is a local dude...
what was he useing to run these sub's????
if you ask me 4 15's is rediculous.. let alone 6...

mcbuggin
05-16-2008, 08:04 AM
well he's putting a masive 1000d on each massive 15. I don't dout that it'll get loud but I think that if I built it it would be louder than what his design is. It looks more for show than go. IMO

2000LaDe
05-16-2008, 08:11 AM
is he doing an straight spl vehicle or is it going to be a daily driven loud vehicle?? thats what makes the difference in his choice. for spl ur best bet would be 4 15's with as much port as possible to bring your tuning freq way up. but if u were doin like bassrace and a daily tuned vehicle u could work in 6 15's but it would be a tight squeeze. your best overall bet is doing 4 15's with the right amount of space and port to be tuned in the mid 30's.

mcbuggin
05-16-2008, 10:48 PM
it's for daily if I can i'll see about gettin some pics sometime. Before anyone asks I don't know when and or if I can or will.

SethPhillips
05-16-2008, 10:51 PM
i didnt kow he was doing a 1000w amp to each sub.. what's he gunna do as far as electrical to back it up????

GnFnRs
05-16-2008, 11:12 PM
i would say 4 in a proper box will kill 6 in a questionable one. i once did a single cab f150 with 4 15's and 4 12's all in the cab and with 2 bucket seats because i was told it couldn't be done...was it cool for 1991 when no one was doing big stuff in this area..hell yea...did it sound like azzz? hell yea..lol

do the 4 he'll be alot happier


by the way it was 2 low behind the seats..2 high behind yer head. 2 12's in a console and 2 isobaric face to face in the center of the 4 15's..yes it'll fit..no it won't hit

mcbuggin
05-16-2008, 11:19 PM
well the elec. is a 200amp alt. and that's all I know for now

mokedaddy
05-16-2008, 11:25 PM
ok now he is set on inverting the subs so we can all see the motors. now I have never done this but have heard that you need to change the phaseing is this true or not?
thanks

Not necessarily. That all need to be in the same phase but not necessarily different than mounting regular. Try both and see which sounds better. Or they may even be a 180 switch on your amp.

And it depends on the subs whether you want to do 6 or 4. If you are looking at middle of the road subs that dont need massive port area, there is no reason you couldnt do 6.

kovemaster559
05-17-2008, 12:21 AM
6 can be done belive that i just figgured it out eite now its ganna be bad ***

mcbuggin
05-17-2008, 08:16 AM
well it has to be done for a show june 15 so i'll get numbers then if not before

mcbuggin
05-17-2008, 08:17 AM
i didnt kow he was doing a 1000w amp to each sub.. what's he gunna do as far as electrical to back it up????

hey after the show today maybe we can stop by and see the progress that he has made