PDA

View Full Version : box designer needed (flared port)



mdillon
04-27-2008, 01:40 PM
im looking for a box design for 2 mbquart 12's. flared, centered port, corner braced. tuned around 30Hz +/-2

max deminsions are: 40W x 14D x 16-18H. 4 cubes after displacement would be ideal.

will paypal designer.

J31Rob
04-27-2008, 01:42 PM
if you just design a standard ported box & put the flare in.. it'll add/take away those +/- 2 hz.

mdillon
04-27-2008, 01:44 PM
good point. this will be my first attempt at a flared port, so i just want to make sure i do it right the first time.

savagebee
04-28-2008, 03:06 AM
im doing my first fkared port next, and from everything Ive read, it wont matter much at all.

most experienced designers Ive spoken with say measure about halfway out on the flare to determine how long the port will appear, but with end correction and all that jazz, its not an issue