PDA

View Full Version : genaral port area



loudaccent
04-26-2008, 09:58 PM
can some one just give me a list of some idears of wut kind of port arear should be for like
1 10
2 10
3 10

1 12
2 12
3 12

1 15
2 15
3 15

1 18
2 18
3 18

thanks alot guys

RAM_Designs
04-26-2008, 10:02 PM
the general rule of thumb is 12-16in^2 per ft^3 of airapce. Depends on what kind of application you're going for as well...

loudaccent
04-26-2008, 10:11 PM
12-16 per 2 cubic ft and wuts the second haft mean,, o and thanks for the help

RAM_Designs
04-26-2008, 10:15 PM
12-16 per 2 cubic ft and wuts the second haft mean,, o and thanks for the help

well it depends if you're going for all out SPL or if you're doing a daily driver...also depends on what you're tuing to, and managing your port length as well.

I normally do about 12in^2 per cubic foot of airspace when I'm tuning in the low 30's...but in a spl build I'm doing right now I'm using about 20in^2 per cubic foot of airspace.

loudaccent
04-26-2008, 10:16 PM
if your makeing fun of my spelling get over it,, you dont have to spell perfectly in order to get a job task done correct.

loudaccent
04-26-2008, 10:17 PM
thanks ryan,, and is it better to go a little bigger in port area or smaller

RAM_Designs
04-26-2008, 10:19 PM
thanks ryan,, and is it better to go a little bigger in port area or smaller

I just go as big as I can(without going overboard) while maintaining the overall airspace I need, and without having a port over 2ft long.