PDA

View Full Version : Thoughts on this please!



snfsh79077
04-24-2008, 07:37 PM
Ok I now have a HC15 in my posession. I have been thinking about doing a blow through with it in my truck. Problem is I do not want to cut out the support beam so the largest the hole will be on the cab is 13" high by 42" wide(give or take a hair for fit) the box is going to be 42" wide and 16" high. I have designed a box with step down front.

I need input from those who have done blow throughs with 15s.

I also need input on this design. Will the front section act like another box? How will output be affect?

http://i245.photobucket.com/albums/gg46/gboxx1/hc15withfront.png

snfsh79077
04-24-2008, 07:42 PM
bump

blackbonnie
04-24-2008, 07:46 PM
in your sketchup, go to file and export it as a 2d file, then save it in your pics folder, then you can go to photobucket and load it from there and post it here. that might help with people and your question

snfsh79077
04-24-2008, 07:52 PM
updated with picture

snfsh79077
04-24-2008, 08:24 PM
ttt

audiojunky
04-24-2008, 08:25 PM
no

snfsh79077
04-24-2008, 08:30 PM
no wat?

snfsh79077
04-24-2008, 09:54 PM
up...any thoughts?

snfsh79077
04-25-2008, 11:08 AM
ttt

80INCHES
04-25-2008, 04:56 PM
it should work
just put the port on the driver side
it will gain on the tl mic

80

snfsh79077
04-25-2008, 05:24 PM
I hope so...Im gonna try to have it done before the end of june so I can get it metered.