PDA

View Full Version : SethPhillips' 99 Acura integra



SethPhillips
04-21-2008, 09:33 PM
My 99 Acura Integra at My Shop
I installed the Tint, System, tinted tail's and turn sig's, H.I.D.'s... well pretty mutch everything...
http://i152.photobucket.com/albums/s166/sethp123/acura1.jpg
http://i152.photobucket.com/albums/s166/sethp123/acura2.jpg
http://i152.photobucket.com/albums/s166/sethp123/acura3.jpg
http://i152.photobucket.com/albums/s166/sethp123/acura4.jpg
JVC in dash and RF temp/ volt/ amp gage where factory clock was.
http://i152.photobucket.com/albums/s166/sethp123/100_0698.jpg
the whole entire car is soundeadend with stinger pro sound deadner
2 layer's everywhere, floor, side inner and outter panels' door's have 3 layer's on each panel
door's:
http://i152.photobucket.com/albums/s166/sethp123/leftdoor.jpg
http://i152.photobucket.com/albums/s166/sethp123/door.jpg
alpine spx x types in door's
http://i152.photobucket.com/albums/s166/sethp123/leftdoorspeaker.jpg
XO'S under right rear speaker.. behind plastic panel
http://i152.photobucket.com/albums/s166/sethp123/XO.jpg
RF 400X2 running X-types
http://i152.photobucket.com/albums/s166/sethp123/amp.jpg

SethPhillips
04-21-2008, 09:33 PM
under hood bat spv70 with 1/0 big 3
http://i152.photobucket.com/albums/s166/sethp123/100_0532.jpg
rear batt
http://i152.photobucket.com/albums/s166/sethp123/batt-1.jpg
batt and amp
http://i152.photobucket.com/albums/s166/sethp123/ampbatt.jpg
box plans
http://i152.photobucket.com/albums/s166/sethp123/subbox.png
http://i152.photobucket.com/albums/s166/sethp123/box.jpg
box in car
http://i152.photobucket.com/albums/s166/sethp123/100_0804.jpg
http://i152.photobucket.com/albums/s166/sethp123/100_0805.jpg
all installed by sethphillips

brtnboarder3241
04-21-2008, 09:41 PM
as much as everyone really hates you(not me) you have nice installs, and that looks very good.

slam
04-21-2008, 09:45 PM
nice ride and install

SethPhillips
04-21-2008, 09:45 PM
as much as everyone really hates you(not me) you have nice installs, and that looks very good.

ive had quite a few car audio shops try to hire me for my install skill's and attention to detail....

and thank you...

brtnboarder3241
04-21-2008, 09:46 PM
i think i ask but how much did that integra cost you? and how many miles did it have at the time?

Slammed
04-21-2008, 09:46 PM
Ja-Rule drove your car in the Fast & the Furious :fyi:

ArrizX
04-21-2008, 09:46 PM
why does everyone hate this dude?

Slammed
04-21-2008, 09:46 PM
I dont like Ja-Rule

SethPhillips
04-21-2008, 09:48 PM
i think i ask but how much did that integra cost you? and how many miles did it have at the time?
i piked up the teg of a lady i know for 5k w 100k on it... im the sec owner...


Ja-Rule drove your car in the Fast & the Furious :fyi:
that's great.....:rolleyes:

why does everyone hate this dude?
bad grammer and spelling.... that's all....

btdickey99
04-21-2008, 09:48 PM
nice install....vidz tomorrow Im assuming?

Slammed
04-21-2008, 09:50 PM
that's great.....:rolleyes:




j00 knew that...thats why you bought it :fyi:

SethPhillips
04-21-2008, 09:51 PM
nice install....vidz tomorrow Im assuming?

i could... just don't know how to upload vid's....

Slammed
04-21-2008, 09:51 PM
:p:

morgans432
04-21-2008, 09:53 PM
aren't those subs really close to the back? Not sure if it effects anything but would worry me a little. Great work though can tell you take your time

crunktimes.com
04-21-2008, 09:55 PM
why does everyone hate this dude?

He stole our *****es from us :fyi:

Enellz
04-21-2008, 09:56 PM
Good Install

SethPhillips
04-21-2008, 09:58 PM
aren't those subs really close to the back? Not sure if it effects anything but would worry me a little. Great work though can tell you take your time
here is about 3 '' from the baffle of the box to the rear hatch.. but dosent look like it in the pics...
thank you, i have ocd so everything has to be ran threw the car the right way, zip ties every 4-5''.... extra


He stole our *****es from us :fyi:

what did i do??

Powers
04-21-2008, 10:00 PM
Tail lights and corners need clear to look good. :)

Slammed
04-21-2008, 10:01 PM
nice setup...clean car

dont roll your eyes again at me tho ;)

SethPhillips
04-21-2008, 10:03 PM
Tail lights and corners need clear to look good. :)
going to get new one's with smoked lenses so yea not really worried about it.. even tho they do look flat...

nice setup...clean car

dont roll your eyes again at me tho ;)
thank you..

and **** a **** ;)

Slammed
04-21-2008, 10:05 PM
thank you..

and **** a **** ;)

and you wonder why people dont like you

:p:

SethPhillips
04-21-2008, 10:09 PM
and you wonder why people dont like you

:p:
im not here to be liked wtf is this CA.com highschool??
and do i rally care.. i dont need a gey avitar or poke stupid internet jokes at people to be cool buddy...
love me or hate me i could give a ****...
so go on with ur babeling on about chuck norris, and JOO instead of you ****.. and take it to another thread....;)

Slammed
04-21-2008, 10:10 PM
im not here to be liked wtf is this CA.com highschool??
and do i rally care.. i dont need a gey avitar or poke stupid internet jokes at people to be cool buddy...
love me or hate me i could give a ****...
so go on with ur babeling on about chuck norris, and JOO instead of you ****.. and take it to another thread....;)

j00 have to chill mang

I was playing...geez


sand in ***** no good holmes...and if j00 dont give a **** why reply that j00 dont give a ****?

NeverEnuffBass
04-21-2008, 10:10 PM
nice put that RITOP edumacation to work!

Slammed
04-21-2008, 10:11 PM
oh yeah...your grammar is golden :fyi:

SethPhillips
04-21-2008, 10:11 PM
nice put that RITOP edumacation to work!
you know how we dooo!!!!!!!!!

Slammed
04-21-2008, 10:16 PM
can we be friends?

flipside1212
04-21-2008, 10:33 PM
hey seth how are the ssd's doing off 2000? im about to throw mine on 2000

mazzasec
04-21-2008, 10:56 PM
Was that tint hard to install? I wanna give it a try on my own

thaster
04-21-2008, 11:02 PM
hey can i see how you hook up the alt+ to battery+ for the Big 3. The other ground wires for the BIg 3 was cake but i was just looking at the Alternator and its a tight fit there. How did you do it?

speedfreak28
04-21-2008, 11:03 PM
nice work, clean ride.

lil_italy773
04-21-2008, 11:05 PM
id turn that into a type R from the outside. that was a car i never was able to get a integra. great shape its into.

skadude016
04-21-2008, 11:08 PM
aren't those subs really close to the back? Not sure if it effects anything but would worry me a little. Great work though can tell you take your time

x2 but everything else looks good :)

bigbangtheory
04-22-2008, 12:23 AM
I have always liked Seth myself.

Only reason people give him ****, is because he tells it like it is and well, he is right, his grammar ain't..................I said ain't, that good. :)

Nice install and sick teg!

x2 on the tails and turnsignals. Need to be cleared, but you said you are getting smoked ones.

Peace and go Cleveland!

Or you going for Utah now?

DarrenE46
04-22-2008, 08:38 AM
Did he upgrade his alternator? Small Honda's and Civic's have weak electrical systems (a problem I am encountering right now), If he's running two batt's and a 2000D, I hope so.

SethPhillips
04-22-2008, 12:13 PM
hey seth how are the ssd's doing off 2000? im about to throw mine on 2000
they BANG! and if you ask me, they want more.....


Was that tint hard to install? I wanna give it a try on my own
no but ive been tinting off and on for... 5 years now.. the first year was hell till you start to get the hang of it.. i would hire someone to do it...


hey can i see how you hook up the alt+ to battery+ for the Big 3. The other ground wires for the BIg 3 was cake but i was just looking at the Alternator and its a tight fit there. How did you do it?
it was easier thn the rest..... just easy. i really can't explaine due to the fact of how easy it was... just ran the wire, un did the nut on the alt + took off the rubber bootie, and put my 1/0 cable keeping the factory cable as well, then i got a biger rubber bootie to cover the post.. allso fused the wire...

nice work, clean ride.
thank you


id turn that into a type R from the outside. that was a car i never was able to get a integra. great shape its into.
yes car is in great shape..


x2 but everything else looks good :)
thank you


I have always liked Seth myself.

Only reason people give him ****, is because he tells it like it is and well, he is right, his grammar ain't..................I said ain't, that good. :)

Nice install and sick teg!

x2 on the tails and turnsignals. Need to be cleared, but you said you are getting smoked ones.

Peace and go Cleveland!

Or you going for Utah now?
why thank you bbt, i know it aint good and i aint givin a ****...
GO CAV'S, Utah basketball, HAHA! it's a joke!


Did he upgrade his alternator? Small Honda's and Civic's have weak electrical systems (a problem I am encountering right now), If he's running two batt's and a 2000D, I hope so.

i have yet to upgrade the alt, contacted my stinger rep yesterday, and put one on order:) so here in the next few week's i'll post pick's on my HO alt install..

jco1385
04-22-2008, 12:38 PM
i lub j00 seth :fyi:

SethPhillips
04-22-2008, 12:55 PM
i lub j00 seth :fyi:

thank you....:confused:

jco1385
04-22-2008, 12:56 PM
:blush:

na_rsx
04-22-2008, 01:54 PM
i hate the location of the alternator on my car, its right below the intake manifold :(

Powers
04-22-2008, 01:55 PM
going to get new one's with smoked lenses so yea not really worried about it.. even tho they do look flat...



That works too. ;)

I'm the king of DIY tinted lenses. :p:

http://img.photobucket.com/albums/v138/andrewfrom1985/Sep20002sm.jpg

Powers
04-22-2008, 01:57 PM
i hate the location of the alternator on my car, its right below the intake manifold :(

Mine too. **** K-Series. :p:

na_rsx
04-22-2008, 02:49 PM
Mine too. **** K-Series. :p:

lol werd bro

:toast:

SethPhillips
04-22-2008, 03:04 PM
i hate the location of the alternator on my car, its right below the intake manifold :(

**** that *****.. i gotta pull my front driver's side wheel and axle out to get to mine.. booooo,,:crap:

jco1385
04-22-2008, 03:05 PM
That works too. ;)

I'm the king of DIY tinted lenses. :p:

http://img.photobucket.com/albums/v138/andrewfrom1985/Sep20002sm.jpg

that's ugly as sin

Powers
04-22-2008, 04:22 PM
that's ugly as sin

I don't care what you think. :crazy:

SethPhillips
04-23-2008, 12:21 PM
i just picked up a BNIB Kinetik hc2400 for 180:veryhapp: so i will be putting that in soon, will post pic's...

mfenske
04-23-2008, 03:38 PM
Hey Seth, how did you go about running speaker wires in to the doors? My buddy has a four door Integra and it seems to be a real chore.

jco1385
04-23-2008, 03:39 PM
I don't care what you think. :crazy:

i didnt ask you to care :fyi:

just commenting...

SethPhillips
04-23-2008, 03:43 PM
Hey Seth, how did you go about running speaker wires in to the doors? My buddy has a four door Integra and it seems to be a real chore.

ohh boi it was NOT FUN!! took me about an hour- two hours a door...
i ran a stinger 4 wire into the door ( comes with a orange protective caseing on it, inside the caseing is 4 16ga wires) you can see them comeing out of the speaker hole in the pass door pic...
what i did was pulled the door boot out, there is a plastic molex plug in the door, that clips into the door, i had to pull that all out and drill threw the plastic molex plug, and had to be very carefull not to hit any other wires in the plug...
then i ran my wire's threw the rubber boot, threw the molex plug and into the door's...

all in all the hardest part had to be getting the molex plug's to snap back together, and back into the door... toook for ever!

it was a PAIN IN THE AZZ but it was the best way...
i allso had this whoooole car taken apart, the interior was bare when i ran all my wires....

skadude016
04-23-2008, 03:43 PM
that's ugly as sin

x a million

SethPhillips
04-23-2008, 03:51 PM
that's ugly as sin


x a million

i agree....;)

Dingleberry
04-23-2008, 08:41 PM
Hey Seth, how did you go about running speaker wires in to the doors? My buddy has a four door Integra and it seems to be a real chore.

Here:
http://www.team-integra.net/sections/articles/showArticle.asp?ArticleID=257

Immacomputer
04-24-2008, 11:27 AM
ohh boi it was NOT FUN!! took me about an hour- two hours a door...
i ran a stinger 4 wire into the door ( comes with a orange protective caseing on it, inside the caseing is 4 16ga wires) you can see them comeing out of the speaker hole in the pass door pic...
what i did was pulled the door boot out, there is a plastic molex plug in the door, that clips into the door, i had to pull that all out and drill threw the plastic molex plug, and had to be very carefull not to hit any other wires in the plug...
then i ran my wire's threw the rubber boot, threw the molex plug and into the door's...

all in all the hardest part had to be getting the molex plug's to snap back together, and back into the door... toook for ever!

it was a PAIN IN THE AZZ but it was the best way...
i allso had this whoooole car taken apart, the interior was bare when i ran all my wires....

Haha, I was in the process of doing my wire run the same way and about half way through one door, I said, "**** it" and used my dremel to cut through the door near the bottom and just loomed some wires and shoved them in. I polished the hole so it wouldn't cut the wires and it works pretty well and I don't notice it anymore.

You have a good looking car and I hate integras! It really makes mine look like a junk yard creation (I guess that's what happens when your car gets stolen and junkyard owners do the repairs without my consent). I'm not sure how I feel about the tail lights but they look better than the riced out chrome lights.

SethPhillips
04-24-2008, 11:31 AM
Haha, I was in the process of doing my wire run the same way and about half way through one door, I said, "**** it" and used my dremel to cut through the door near the bottom and just loomed some wires and shoved them in. I polished the hole so it wouldn't cut the wires and it works pretty well and I don't notice it anymore.

i just wanted EVERYTHING to look as stock as possible.... and yes it was a PAIN IN THE AZZ!! but in the end it was very worth it...



You have a good looking car and I hate integras! It really makes mine look like a junk yard creation (I guess that's what happens when your car gets stolen and junkyard owners do the repairs without my consent). I'm not sure how I feel about the tail lights but they look better than the riced out chrome lights.

yea im going to be getting new tailight's, and front turn signal lenses, the black with smoked lenses one's...
i hate those crome tailight's:furious:
i need to get a nice exhast system on it and i will be done with the car......... for awhile:laugh:
and i still owe you $5 for the box design.;) but im broke as a joke right now :crap:

thaster
04-24-2008, 11:31 AM
Haha, I was in the process of doing my wire run the same way and about half way through one door, I said, "**** it" and used my dremel to cut through the door near the bottom and just loomed some wires and shoved them in. I polished the hole so it wouldn't cut the wires and it works pretty well and I don't notice it anymore.

You have a good looking car and I hate integras! It really makes mine look like a junk yard creation (I guess that's what happens when your car gets stolen and junkyard owners do the repairs without my consent). I'm not sure how I feel about the tail lights but they look better than the riced out chrome lights.


i did the same thing hahahaha! ghetto but it works.

SethPhillips
04-24-2008, 11:39 AM
i did the same thing hahahaha! ghetto but it works.

that's one of the thing's i like about being a installer with OCD... i make myself do everything the right way, weather it takes a long time or not... witch i think is good.. i dunno ya know?

Immacomputer
04-24-2008, 11:43 AM
i just wanted EVERYTHING to look as stock as possible.... and yes it was a PAIN IN THE AZZ!! but in the end it was very worth it...
yea im going to be getting new tailight's, and front turn signal lenses, the black with smoked lenses one's...
i hate those crome tailight's:furious:
i need to get a nice exhast system on it and i will be done with the car......... for awhile:laugh:
and i still owe you $5 for the box design.;) but im broke as a joke right now :crap:

Haha, I know what it is like to be broke; don't worry about it!

I wish mine could look stock but that's just not possible now with how they ****ed up my car. It only has to get me through college and I'm not an aesthetics person anyways. It would be nice to drive a single colored car and now a pink car with a red front bumper and red spot on me rear bumper. The ****ers at the car shop bought $200 worth of paint and painted the front bumper and only a 1'x1' square on the rear bumper and left the rest pink. They also forgot to tighten the battery terminals and bolt the battery down so it flopped around and the ground wire came off while driving. They stole my RCAs and wiring and ****ed up the carpeting job in the car. They managed to do all this and take over a month longer than they said they would. What assholes.

Lesson learned: If your car gets jacked, don't let the insurance company take it to their "trusted" collision shop to "repair" it.

SethPhillips
04-24-2008, 11:47 AM
Haha, I know what it is like to be broke; don't worry about it!

I wish mine could look stock but that's just not possible now with how they ****ed up my car. It only has to get me through college and I'm not an aesthetics person anyways. It would be nice to drive a single colored car and now a pink car with a red front bumper and red spot on me rear bumper. The ****ers at the car shop bought $200 worth of paint and painted the front bumper and only a 1'x1' square on the rear bumper and left the rest pink. They also forgot to tighten the battery terminals and bolt the battery down so it flopped around and the ground wire came off while driving. They stole my RCAs and wiring and ****ed up the carpeting job in the car. They managed to do all this and take over a month longer than they said they would. What assholes.

Lesson learned: If your car gets jacked, don't let the insurance company take it to their "trusted" collision shop to "repair" it.

yea that dosent sound to good.....
if i sold my truck theeeeeen i would have some money!

caligirl2k
04-25-2008, 05:35 AM
Nice teg..

SethPhillips
04-25-2008, 01:07 PM
Nice teg..

thank you

fawd06
04-27-2008, 03:29 PM
did u meter yet?

InhumanAcura
04-27-2008, 03:42 PM
is that an ls or gsr? miss my teg..

http://img86.imageshack.us/img86/3111/pict0003td6.jpg

fawd06
04-27-2008, 03:43 PM
is that an ls or gsr? miss my teg..

http://img86.imageshack.us/img86/3111/pict0003td6.jpg

ouch! another teg down the drain..

SethPhillips
04-28-2008, 11:50 AM
did u meter yet?
yea but did not get it meterd with the car running. did a legal 139.1 with the car off...

is that an ls or gsr? miss my teg..

http://img86.imageshack.us/img86/3111/pict0003td6.jpg
****...

thaster
04-28-2008, 11:52 AM
is that an ls or gsr? miss my teg..

http://img86.imageshack.us/img86/3111/pict0003td6.jpg

****.....nice rims though! rota maybe?

Eugenics
04-28-2008, 12:10 PM
god bless

IamDeMan
04-28-2008, 12:33 PM
why does everyone hate this dude?I don't believe people hate him. He is just one of the lounge rag dolls.

Looks nice Seth.

SethPhillips
04-28-2008, 01:34 PM
I don't believe people hate him. He is just one of the lounge rag dolls.

Looks nice Seth.

thank you sir... i love you too..

Eugenics
04-28-2008, 03:17 PM
and those rims on matts tegs would be rota slipstreams. light and cheap. <3

thaster
04-28-2008, 03:51 PM
and those rims on matts tegs would be rota slipstreams. light and cheap. <3

i knew it!

SethPhillips
04-28-2008, 03:53 PM
i wanna get a bigger wheel on mine...

InhumanAcura
04-28-2008, 04:18 PM
I had some 18"s for it aswell..

http://img166.imageshack.us/img166/4564/dsc01745kh6.jpg

Ran 15" wheels w/ some Falken Azenis for road racing..

http://img149.imageshack.us/img149/4866/pict0008ak1.jpg

SethPhillips
04-28-2008, 04:28 PM
i may just keep the wheel's. paint them black and leave the chrome lip... and throw some new tires on it..

SethPhillips
05-17-2008, 08:08 PM
well just got it meterd...... 146.00 db at 39 hz.

integra88
05-17-2008, 08:15 PM
Good score Seth;) Especially w/ only 2000 watts. I pulled a 143.7 legal w/ car running in my '88 teg ls @ 51 hz. Your score would climb if you tuned to a higher resonant freq. Your teg should peak between 50 and 60 hz. Tune your box for that and you'll gain serious deebee's:eek: It won't be very musical, but it'll WANG!!!!

SethPhillips
05-17-2008, 08:51 PM
Good score Seth;) Especially w/ only 2000 watts. I pulled a 143.7 legal w/ car running in my '88 teg ls @ 51 hz. Your score would climb if you tuned to a higher resonant freq. Your teg should peak between 50 and 60 hz. Tune your box for that and you'll gain serious deebee's:eek: It won't be very musical, but it'll WANG!!!!

im happy wite it is now.. im set up for daily driver SQL...
maybe later down the road...

Chevyboy10
07-04-2008, 02:07 PM
looks like a little rip in the cone?????
AND
is this suppose to be audio or street racer
lol your trying to pull both off the with the CAI :)

SethPhillips
07-04-2008, 02:12 PM
it's supposed to be a car.. that takes me from point a to be.. no raceing.. none of that....

do you see anything " street racer" like on it.. you ****in tard...

it's just my acura integra with a loud stereo in it...

yea.. raceing with over 600 lb of audio equipment...:rolleyes:

dumpin907
07-04-2008, 02:19 PM
might wanna cover your license plates bro

SethPhillips
07-14-2008, 07:46 PM
might wanna cover your license plates bro

yea i know. im just coky like that..

SethPhillips
07-19-2008, 07:09 PM
here's a vid for ur veiwing pleasure!:D
http://i13.photobucket.com/albums/a288/xtgrovex/th_IMGP8218.jpg (http://s13.photobucket.com/albums/a288/xtgrovex/?action=view&current=IMGP8218.flv)

jadon087
07-20-2008, 02:17 AM
**** sounds loud!! Nice job man.

Rashaddd
07-20-2008, 03:47 AM
Very nice on everything, but why not use the hatch as a horn?

Orion Man
07-20-2008, 04:37 AM
Sounds weak! I can fart louder than that! Lol jk bro. That thing is loud and we were talkin' about doing the BTL 18's in mine! Were both nuts!!!

SRim23
07-20-2008, 04:48 AM
might wanna cover your license plates bro

why? i mean driving around town bumping is probably more dangerous than posting his car on a forum right? or is there something people can do with his license plate? i mean hell his name is his SN if someone wanted to look him up and go to his place and steal his stuff they could......so i dont understand why everyone blocks out there plate honestly. driving down the road hundreds of people can see it a day.

bigbangtheory
07-20-2008, 09:53 AM
why? i mean driving around town bumping is probably more dangerous than posting his car on a forum right? or is there something people can do with his license plate? i mean hell his name is his SN if someone wanted to look him up and go to his place and steal his stuff they could......so i dont understand why everyone blocks out there plate honestly. driving down the road hundreds of people can see it a day.

Word!

SethPhillips
07-20-2008, 12:34 PM
**** sounds loud!! Nice job man.
tis, it is... tis it is.


Very nice on everything, but why not use the hatch as a horn?
umm i dunno.. cause my horn is under my hood, it gose. beep beep..:confused:


Sounds weak! I can fart louder than that! Lol jk bro. That thing is loud and we were talkin' about doing the BTL 18's in mine! Were both nuts!!!
talkin is right you been talking about allot of things gavin when you gunna do what you say!!!:p:


why? i mean driving around town bumping is probably more dangerous than posting his car on a forum right? or is there something people can do with his license plate? i mean hell his name is his SN if someone wanted to look him up and go to his place and steal his stuff they could......so i dont understand why everyone blocks out there plate honestly. driving down the road hundreds of people can see it a day.


Word!

exactly.. i have a GPS tracking system on that car anyway.. it's parked in a grage while im at home, at work. at night.. the only time it's out and vulnurable is if i go to a mall...
im not worried, full coverage insurance FTW!

bigbangtheory
07-20-2008, 01:59 PM
tis, it is... tis it is.


umm i dunno.. cause my horn is under my hood, it gose. beep beep..:confused:


talkin is right you been talking about allot of things gavin when you gunna do what you say!!!:p:





exactly.. i have a GPS tracking system on that car anyway.. it's parked in a grage while im at home, at work. at night.. the only time it's out and vulnurable is if i go to a mall...
im not worried, full coverage insurance FTW!


Just make sure you have your **** bolted down and what not. Something about if you have your **** just laying there and they get to it, they won't cover it. Not sure if that is all insurance companies, but I have been told that a couple times. Plus make sure you keep all your receipts mang.

Orion Man
07-20-2008, 08:29 PM
I would love to do what I talk about but you forget my better half truly says what goes! You'll learn that when you get married. LOL.

SethPhillips
07-21-2008, 11:30 AM
Just make sure you have your **** bolted down and what not. Something about if you have your **** just laying there and they get to it, they won't cover it. Not sure if that is all insurance companies, but I have been told that a couple times. Plus make sure you keep all your receipts mang.
yup ur correct. i have everything except the box bolted down with security hex screws.
that box with the subs in is like 300 pounds..


I would love to do what I talk about but you forget my better half truly says what goes! You'll learn that when you get married. LOL.

im just playing with you gavin...
and im not getting married. :fyi:

MikeyB
07-21-2008, 05:59 PM
You would probably gain a lot if you ran the subs up and port either on the bottom at the back (crx style), or bottom firing up with the subs.

:fyi:

SethPhillips
07-22-2008, 08:21 PM
You would probably gain a lot if you ran the subs up and port either on the bottom at the back (crx style), or bottom firing up with the subs.

:fyi:

i probubly would :fyi:, but i like it the way it is..:p:

Oldbass38
07-23-2008, 06:06 PM
You would probably gain a lot if you ran the subs up and port either on the bottom at the back (crx style), or bottom firing up with the subs.

:fyi:

I was thinkin the same thing since I've owned several hatchbacks and I always had my subs facing up. But....To each his own....As long as he's happy that's all that matters....I would be VERY curious how it would sound with subs up though.....

dcole18
07-23-2008, 06:14 PM
subs up, port up ftw

SethPhillips
07-23-2008, 06:26 PM
I was thinkin the same thing since I've owned several hatchbacks and I always had my subs facing up. But....To each his own....As long as he's happy that's all that matters....I would be VERY curious how it would sound with subs up though.....

i am allso curious.. but that's next year's project..

what you think will benifit me more..

sub's up, port up..
sub's up port back.
sub's forward port up?

? i think either sub's up port up or back ftw.

dcole18
07-23-2008, 06:27 PM
subs up port up has been loudest out off all the teg boxes ive built (20+... )

SethPhillips
07-23-2008, 06:30 PM
subs up port up has been loudest out off all the teg boxes ive built (20+... )

well i shall check into it.. right now im fine with what i got, maybe next year.

dcole18
07-23-2008, 06:31 PM
well i shall check into it.. right now im fine with what i got, maybe next year.

its cool... ive built quite a few teg boxes since a buddy of mine used to be pres of a teg club

SethPhillips
07-24-2008, 01:56 PM
awsome...

Orion Man
07-25-2008, 01:05 PM
im just playing with you gavin...
and im not getting married. :fyi:

Uh-huh. I'll have to have a talk with ur woman. We'll see whose the boss.... LOL.:D

Fiercetimbo17
07-25-2008, 01:49 PM
subs up port up has been loudest out off all the teg boxes ive built (20+... )

Really, never metered my boxes that were firing up but never seemed as loud, also did not like the way it sounded, thought i might have been getting cancellation/nasty reflection off the rear glass

SethPhillips
08-09-2008, 06:30 PM
Uh-huh. I'll have to have a talk with ur woman. We'll see whose the boss.... LOL.:D

deff not her ***** ***... thas for sure.. **** drive this car, not *****

Orion Man
08-10-2008, 06:02 PM
well i shall check into it.. right now im fine with what i got, maybe next year.


And you give me $hit about changing stuff all the time. Your system is awesome. I would change your components if your absolutely dying to do something. My .02

Orion Man
08-10-2008, 06:05 PM
deff not her ***** ***... thas for sure.. **** drive this car, not *****

LOL! Your funny. I don't know what the hell I want though. I look more at the money factor than anything. I really like the Acura TL, but thats what the wife wants me to get. I really want an Evo X. We'll see what happens next year. I still might dive into the Integra (don't tell my wife) so we'll see. :crazy:

MmatsDude
08-27-2008, 11:11 PM
here's a vid for ur veiwing pleasure!:D
http://i13.photobucket.com/albums/a288/xtgrovex/th_IMGP8218.jpg (http://s13.photobucket.com/albums/a288/xtgrovex/?action=view&current=IMGP8218.flv)

Dayum, hopfully mine sounds like that. Good stuff man.

azbass
08-27-2008, 11:17 PM
http://i152.photobucket.com/albums/s166/sethp123/100_0805.jpg
all installed by sethphillips

neat stuff and all, but this just looks blah, and too much.

MmatsDude
08-27-2008, 11:19 PM
neat stuff and all, but this just looks blah, and too much.

You mean the box is too big?

SethPhillips
08-29-2008, 02:29 PM
it's nothing spechial, just a normal install that sounds good to me, thas all i need.

hdj20
09-24-2008, 05:41 PM
dude im fukn jealous no jack

ls2poweredgoat
09-24-2008, 05:44 PM
Nice looking car.

IDSkoT
09-24-2008, 05:45 PM
You have a pic of the trunk before the install by chance?
(With our without the plastic lining)

khanhfat
09-24-2008, 06:20 PM
i'd rather have crossover inside the car rather than on doors ... it'll get rusted... your sub box seems too big and i afraid the woofer cone might hit on the car's body or when u accelerate hard .

SethPhillips
09-24-2008, 06:26 PM
You have a pic of the trunk before the install by chance?
(With our without the plastic lining)
nope i do not.

i'd rather have crossover inside the car rather than on doors ... it'll get rusted... your sub box seems too big and i afraid the woofer cone might hit on the car's body or when u accelerate hard .

well the crossover's are not in the door. they are behind the passenger's side rear plastic panel.

and the sub box could be pushed as far back to the rear of tha car and still not hit the back of the car.

the back of the car is not flat. it has a round shape. the pic's do no justice. you see it in person there is about 6-7'' from the baffle of the sub box to the rear of the car. has plenty of room to breath. at worst when it's pushed all the way back to the back of the car i have about 5'' from the baffle to the back of the car.

xseveredveganx
09-24-2008, 06:32 PM
I think it looks good, bro!

SethPhillips
09-24-2008, 06:35 PM
I think it looks good, bro!

thanks.
once im done with other expensise, like my house. i plan on running Hurtz mlk 3 ways active. and maybe some AQ sub's..

Fiercetimbo17
09-25-2008, 03:36 PM
You have a pic of the trunk before the install by chance?
(With our without the plastic lining)

i think i do, ill check (not his car mine but same car)

Loud3
11-27-2008, 11:01 AM
<--- loves it.

SethPhillips
11-27-2008, 11:38 AM
<--- loves it.

an i personaly think the rim's on ur maxima make the car..

i love that body style maxima, quick little ****er's too..

Fusion_FREAK
11-27-2008, 12:21 PM
Good looking car. The 'optional' kit like mine would make the car look awesome.
I need to get a can of Nightshades and do my turn signals.

Hey, any pics of how you did the RF temp and volt gauge where the clock used to be? I want to do something like that. If not, I'm just going to get the JDM amber clock to match my amber cluster and climate control.

SethPhillips
11-28-2008, 11:50 AM
Good looking car. The 'optional' kit like mine would make the car look awesome.
I need to get a can of Nightshades and do my turn signals.

Hey, any pics of how you did the RF temp and volt gauge where the clock used to be? I want to do something like that. If not, I'm just going to get the JDM amber clock to match my amber cluster and climate control.

the RF voltage, temp, and amp AC output voltage gauge's are no longer made..

i had like 5 of them at one time..

i should have posted pics on how i did it.

basicly i took quarter inch mdf and cut it to the same side of the original clock bezzle, rounding the edges and makeing sure it fit snug, then out of the same size mdf i cut a pice to house the gauge, then took tooth pic's and made it angled toward's me and then basicly filled it all in with bondo, sanded, and painted. came out very vice..

going to fiber glass the door panels and A & B pillar's soon.

allout13
02-23-2009, 10:44 PM
do you have any pictures of where you ran your power wire?
I just got a teg and am looking to run the wire right the first time

SethPhillips
02-24-2009, 01:00 PM
do you have any pictures of where you ran your power wire?
I just got a teg and am looking to run the wire right the first time

no i don't. in order to get my 1/0 wire ran down the passenger side correctly i had to do some modifications. not allot tho. it wasn't that hard..

pyrothug434
05-06-2009, 12:52 PM
didnt feel like reading the whole forum but im guessing those are fi q ?? how many db do they get without the type x's do u kno or did u only meter it after the type x's were in ?? j/w bc im thinking about doing basically the same setup with dif amp and a kinetik 1800