Fiat Stilo by _Dejan_

[_Dejan_]

Hi everyone,
Now is time to present my project
Few pictures when car has been stock:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Stilo6.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Stilo1.jpg

Few new badges:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Nalepka2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Nalepka3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Nalepka4.JPG

First Im buy new complete suspension and lower car for 5cm.

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/InterAlloy2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/InterAlloy3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/InterAlloy5.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/InterAlloy7.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/InterAlloy8.JPG

[_Dejan_]

Then Im build my first CARPC with next components:
Jetway 7F2WE-1G5-OC 1.5GHz
M2-ATX 6-24V DC/DC (160 Watt)
Adapter HDD 2.5" to 3.5"
2,5" HDD
RAM 1024MB DDR-II 533MHz CL4
VoomPC [Black Edition]
BU353 USB GPS (Sirf III)
USB Bluetooth Jabra A320s
USB Wireless card with external 6dB antenna
7" LCD In-Dash Touchscreen (K90)120GB

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/OsnovnaPlosca.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Disk.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Napajalnik.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/CARPC3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/CARPC4.JPG

Installing carpc into car:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Armaturka.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Kondenzator.JPG

VGA cable:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/VGAKabel.JPG

USB HUB with WLAN, BT, TS & GPS
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Hub1.JPG

[_Dejan_]

second USB HUB
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Hub3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/CARPC1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/CARPC2.JPG

Radio & LCD:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Konzola1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Konzola2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Konzola3.JPG

[_Dejan_]

Then Im sell this CARPC and start build new INDASH CARPC :)

First Im buy few new things.

OBD Pro:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/ELM237-1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/ELM237-2.JPG

Microphone:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Mikrofon1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Mikrofon2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC/Mikrofon3.JPG

Then Im buy components:
-MainBoard: VIA PICO PX 10000G Pico-ITX
-Ram A-DATA SO DDR2 1GB 533MHz
-HDD 2.5" WD 1600BEVS S-ATA
-Adapter SATA-HDD 2.5" to SATA-MB and Power
-Power Suply M2-ATX 6-24V DC/DC (160 Watt)
-Monitor LCD TS CTF800
-GPS OEM GlobalSat ET-332
-TPMS

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/VIAPICO1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/GPS.JPG

http://www.mp3car.com/vbulletin/attachments/hardware-development/45486d1192207032-custom-usb-tyre-pressure-monitoring-interface-kit.jpg

[_Dejan_]

Then Im start making mask for LCD:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Maska1.JPG

and building TPMS:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/TPMS2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/TPMS3.JPG

And then Im find first little problem. I need case for carpc. hmmmmmmmmm where can I get it? Maybe build it from old PC case? no to hard And Im find old radio from mothers stilo Looks nice maybe I can use it

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Kasetar1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Kasetar2.JPG

Time to destroy it

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje2.JPG

And with new mask for LCD:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje4.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje5.JPG

[_Dejan_]

On this picture you can see MB, HDD & GPS:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje6.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje7.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje8.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje9.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje10.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje11.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje12.JPG

then Im put HDD on rubbers:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Disk1.JPG

And build audio connector:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Konektor1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Konektor2.JPG

[_Dejan_]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Konektor3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Konektor4.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Cinch1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Cinch2.JPG

then Im stop my project because pico MB doesn't support S3 power state and Im sell it. Yesterday Im receive new board VIA EPIA NX15000G and continue building CARPC. Im change positions of components, HDD & M2-ATX power suply is below MB.

Motherboard VIA EPIA NX15000G
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/VIANX15000-1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/VIANX15000-2.JPG

then Im must find best positions for power supply, HDD and motherboard:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje13.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje14.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje15.JPG

[_Dejan_]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje16.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje17.JPG

I have a little more space...

I continue with my project. Im build TTL->USB module for my GPS globalsat ET332 module.

First TTL->RS232:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/GPS2.JPG

And then real board TTL->USB:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/GPS3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/GPS4.JPG

Mounting GPS and modul in case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/GPS6.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/GPS7.JPG

[_Dejan_]

Preparing for putting case together:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje18.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje19.JPG

USB connector, GPS connector and Audio connectors:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje20.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje21.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje22.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje23.JPG

Finished case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje24.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje25.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje26.JPG

And here is one quick movie how work...
LINK YOU-TUBE (http://www.youtube.com/watch?v=nAQG-7chmII)

[Idealrealist]

Neat.

[_Dejan_]

So there is preparing for update audio system.
In original place in door will be Hertz Mille ML165:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzML165-1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzML165-2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzML165-3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzML165-4.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzML165-5.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzML165-6.JPG

and tweeters Hertz Space 1.1:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzSpace1-1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzSpace1-2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/HertzSpace1-3.JPG

[_Dejan_]

Few old power cables:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Kabli1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Kabli2.JPG

And new:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Kabli3.JPG

Block for + power cable. in: 2x 50mm2 out: 3x35mm2 + 3x10mm2:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/RazdelilniBlok1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/RazdelilniBlok2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/RazdelilniBlok3.JPG

Buttyflex for damping door:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/ButtyFlex1.JPG

[_Dejan_]

Then installing components in my car. First we are put down all things from door and put Buttyflex into it.
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata4.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata5.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata6.JPG

Then Im trough original door connector put two cables one 2.5mm2 for ML165 and 1.5mm2 for tweeter.
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata7.JPG

Installing tweeter in original position:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek2.JPG

[_Dejan_]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek4.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek5.JPG

Continue with installing:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata8.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata9.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata10.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata11.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata12.JPG

Test how look tweeter in original position:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek6.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek7.JPG

[_Dejan_]

Completed door:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata13.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata14.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Vrata15.JPG

And 50mm2 cable:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Kabli4.JPG

Im receive first amplifier Audison LRx4.1K for front system:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Audison4_1K-1.JPG

And free t-shirt:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Audison4_1K-2.JPG
Amplifier Audison LRx4.1K:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Audison4_1K-3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Audison4_1K-4.JPG

[_Dejan_]

Amplifier for sub. Audison VRx1.500 + SPL TUNE KIT
2400W RMS @ 1ohm (AB class)

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/AudisonVRx1_500-1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/AudisonVRx1_500-2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/AudisonVRx1_500-3.JPG

panels for tw(not completed):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek8.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek9.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek10.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek11.JPG

Place for headunit:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Predal1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Predal2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Predal3.JPG

[_Dejan_]

And two subwoofer SPL Dynamics XTR12D4 (12" )
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Sub1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Sub2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Sub3.JPG

End panels for tw:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek12.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek13.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/stebricek14.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek15.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek16.JPG

Panels for tw almost finished:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek17.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek18.JPG

[_Dejan_]

And working plugin for Centrafuse for TPMS device
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/TPMS5.JPG

Radio installed:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Predal4.JPG

Cables for CarPC
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Kabli5.JPG

Im change original antenna with new one

Original:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Antena1.JPG

New:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Antena2.JPG

Continue with boot:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik4.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik5.JPG

[_Dejan_]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik6.JPG

Weather:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik7.JPG

finished panels for tw:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek19.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek20.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek21.JPG

Continue...

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik8.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik9.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik10.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik11.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Prtljaznik12.JPG

[_Dejan_]

And how look panels for tw in car:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek22.JPG

New blinkers:
Before:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Zmigovci1.jpg

After:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Zmigovci2.jpg

Test box for subs:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Sub4.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Sub5.jpg

If will be good I will build new one(nicer one) :D

Here is link to youtube when I have been in our national television :D LINK (http://youtube.com/watch?v=rvY60RveTlw)

And yes they are make mistake in Centrafuse name :thumbdown:

[_Dejan_]

Im buy new AGM battery for car :D

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Baterija1.jpg

Then Im connect battery with my sistem...

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Baterija2.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Baterija3.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Baterija4.jpg

And thats all for now :D

[mike11202]

:drool::drool:

excellent job man

[ngsm13]

Sweetass.

nG

[NeedDirections]

wow! Great work, must not have been easy in that weather..

[energizedsbs]

very cool. nice work man

[RidnClean]

amazing work

[bigbangtheory]

Jesus, one of the nicer installs I have seen so far. Well more equipment, then install as it looks as if you are not finished.

Also your English is better than a lot of members from America. :)

That includes me, lol!

[fwb_1234]

Wow man. That's really, really cool.

[_Dejan_]

Jesus, one of the nicer installs I have seen so far. Well more equipment, then install as it looks as if you are not finished.

Also your English is better than a lot of members from America. :)

That includes me, lol!

Hi,
No, Im not finish it yet, I must put fans in double-floor, add socket for filling battery, build new case for subs(First I must try it how work in bass-reflex :) ), I must change disc in carpc from SATA to normal ATA(I have booting problem and problems with connector), I must repair mask for LCD(start "cracking" because of vibration from subs)...

About my english, I use dictionary for assistance :D

Bye, _Dejan_

[bigbangtheory]

Hi,
No, Im not finish it yet, I must put fans in double-floor, add socket for filling battery, build new case for subs(First I must try it how work in bass-reflex :) ), I must change disc in carpc from SATA to normal ATA(I have booting problem and problems with connector), I must repair mask for LCD(start "cracking" because of vibration from subs)...

About my english, I use dictionary for assistance :D

Bye, _Dejan_



Thats cool, plus you will never be done, as it is an addiction. I have been in the audio field since I have been 16 and I am 31 now and have had over 30 different vehicles from cars to trucks. Had a sound system in most of them. So not sure how long you have been into it, but from the looks of it, you seem to know what you are doing, so I would imagine you have been doing it for awhile.

You seem to use different words than what we would use. Such as when you use the word "case." Do you mean enclosure? That is what we use. Also not sure when you mentioned "Bass-reflex?"

Also if you are cracking your trim panel from the bass, then jesus, you must have some extreme bass going on in that little car.

I am American and I sometimes have to break out the good ole dictionary, lol!

[_Dejan_]

Thats cool, plus you will never be done, as it is an addiction. I have been in the audio field since I have been 16 and I am 31 now and have had over 30 different vehicles from cars to trucks. Had a sound system in most of them. So not sure how long you have been into it, but from the looks of it, you seem to know what you are doing, so I would imagine you have been doing it for awhile.

You seem to use different words than what we would use. Such as when you use the word "case." Do you mean enclosure? That is what we use. Also not sure when you mentioned "Bass-reflex?"

Also if you are cracking your trim panel from the bass, then jesus, you must have some extreme bass going on in that little car.

I am American and I sometimes have to break out the good ole dictionary, lol!

Im in car audio field from 2003(when I get drivers licence) then year 2006 Im sell all and now Im start with this new project...

case=box/enclosure
Bass-reflex=enclosure with port

Bass is not so extreme/loud but on r'n'b go low and you can feel vibrations... This CarPc(trim panel) is in car so tight(Because is noot a lot of space) and I think now when Im connect subs are start cracking...

[_Dejan_]

Something new for my carpc:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Disk2.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Disk3.jpg

[mdillon]

im sorry but as i read the op posts, i hear a russian accent in my head.

great work despite my prejudice mind.

[miker]

Holy ****.. wow, awesome work!

[dannyz122001]

that has got to be the most extensive electrical work that i, personally, have seen on the site. great work, keep it up and keep us updated!!!

[_Dejan_]

Im buy something new:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MTRONSSD.jpg

What is in box?

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MTRONSSD1.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MTRONSSD2.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MTRONSSD3.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MTRONSSD4.jpg

Performace:
Read:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MTRON_Read.jpg

Write:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MTRON_Write.jpg

And Im buy another Fiat Stilo but smaller

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Stilo11.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Stilo12.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Stilo13.jpg

[_Dejan_]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Stilo14.jpg
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/Stilo15.jpg

[tez4life]

Great work one of the best installs ive ever seen on this site, esp the Car PC. Very nice job!!

[_Dejan_]

Now is time to show what Im do last week.
Few modification on case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje27.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje28.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje29.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje30.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje31.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Ohisje32.JPG

Im add Wireless card, build new USB->TTL converter for GPS modul, add few Fans, and add/change few components.

In car:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Armaturka1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Armaturka2.JPG

[_Dejan_]

USB PDC - Parking distance system:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/PDC1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/PDC2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/PDC3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/PDC4.JPG

one quick movie how work this USB PDC:
http://www.youtube.com/watch?v=di1SGaq0fVw

New in my car is UMTS:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/MWCONNPLUGIN.JPG

And one quick movie how work Hibernate and Sleep on my CarPC:

http://www.youtube.com/watch?v=dF5o0-UfOzg

Plugin for USB PDC is not finish yet, but we are working on it... Same is with plugin for power suply...
DSATX Plugin(Power suply):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/DSATX_Plugin.JPG

More in next days...

[O1_Galant]

That is sick.

[_Dejan_]

Here is few pictures of my new project:

Mini PCI Wireless SparkLAN WMIA-207GN - wireless card which support n-draft standard(300MBps).
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/SparkLAN%20WMIA-207GN.JPG

Mini PCI-Express Novatel EU850D - UMTS/HSUPA card with download up to 7.2MBps
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/NovatelEU850D.JPG

Processor: Intel P8400 (2x2.26GHz/3M/1066)
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/IntelP8400.JPG

RAM: A-Data 2GB DDR3 1333(cas9) SO-DIMM
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/ADATA2GBDDR3.JPG

Motherboard: Commell LS-373 :)
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_4.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_5.JPG

[_Dejan_]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_6.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_7.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_8.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_9.JPG

Im receive new SSD to:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/IntelX25M80GB.JPG
And few speed tests:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/IntelX25M80GBRead.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/IntelX25M80GBWrite.JPG

Next week I receive few things and I will start with building new CarPC...

[_Dejan_]

After 2 days searching solution, reading how work mini pci express, testing(Im install 3 diferent operating system - Windows 7, Vista and XP Pro) how to prepare my UMTS/HSDPA/HSUPA card that will normaly work. Im try 3 diferent SIM cards but for all Im receive that SIM is not inserted :S And then Im find simple solution:) You can see it in next picture:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/NovatelEU850D2.JPG

Before this problem Im resolving next problem:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/SparkLANWMIA-207GN2.JPG

Commell LS-373 doesn't support minipci Type IIIA card!!! You can only use Type IIIB cards!!! Solution: Buying shorter wireless n - draft card:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/SparkLANWMIR-215GN.JPG

Comparation new-left(Type IIIB) and old-right(Type IIIA) card:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/SparkLANWMIR-215GN2.JPG

Today Im build case and a lot of other things but I will post pictures in next days...

[allout13]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek11.JPG

at first I was like :crap:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC2/Stebricek18.JPG

then I was like :boink:



Nice work!!

[alvitae]

I think Dejan has more brains in his little finger than I do in my whole head :(

[_Dejan_]

Thanks for all comments :D

Here is few new pictures:
First Im change original chipset heatsink on motherboard:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_10.JPG

Then Im change original FAN on CPU:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_11.JPG

Motherboard prepared for installing into case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CommellLS373_12.JPG

Cables for SSD and DVD:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/SATACables.JPG

And connectors for Wireless and GPRS/UMTS/HSDPA/HSUPA card:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/WLANUMTSCables.JPG

Then Im remove case and heatsink from power regulator Carnetix P2140:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CarnetixP2140_1.JPG

Im find one heatsink and Im little modify it:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CarnetixP2140_2.JPG

And fitted into regulator:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CarnetixP2140_3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/CarnetixP2140_4.JPG

[_Dejan_]

Then Im start building case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_2.JPG

And install few components into it:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_4.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_5.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_6.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_7.JPG

Tomorrow I will continue....

[_Dejan_]

Ok what Im do last month?
Nothing special :) but I will anyway post few pictures...

First Im continue building case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_8.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_9.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_10.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_11.JPG

Im again change fan on CPU(and add resistor for lowering rpm):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_12.JPG

And 7x7cm FAN which will be on top side of case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Ohisje_13.JPG

UMTS antena is ready to fix in case:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/UMTSAntena.JPG

Im buy new LCD:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_2.JPG

[_Dejan_]

And Im open it:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_4.JPG

Someone will have work with LCD bezel :D
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_5.JPG

And some part's of LCD:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_6.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_7.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/LilliputLCD_8.JPG

Im receive one toy :D Hmmm what is this?
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_1.JPG

[_Dejan_]

Let's open case. Radio? Nooo...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_2.JPG

Amplifier? Nooo...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_3.JPG

What the hell is this? This is new audio processor Audison Bit One :)
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_4.JPG

How it look:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_5.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_6.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_7.JPG

And DRC (Digital Remote Control) for it:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/AudisonBitOne_8.JPG

New pictures in next days when I will continue with work....

[Blue Fury]

WOW Very nice equipment! Beautiful work!

[Twistid]

Nice!

[farmerehsan]

so nice..moar plz

[_Dejan_]

Today is day for new picture update :)

First Im little "edit" cables positions:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Kabli1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Kabli2.JPG

Then Im install PDC:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/PDC1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/PDC2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/PDC3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/PDC4.JPG

Connecting all together:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Prtljaznik1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Prtljaznik2.JPG

Friend is complete my LCD bezel and Im put all together:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Maska1.JPG

[_Dejan_]

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Maska2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Maska3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Maska4.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Maska5.JPG

Test CarPC Install(working ok but next week I must install GPS module):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Montaza1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC3/Montaza2.JPG

then Im quick setup audio processor and try few songs recorded in 24Bit/96kHz :D

[whitem1ke88]

SICK.

I AM going to contact you when I do my carpc, I hope you'll be willing to help. I know most of that stuff already but I need to know where you got a few of the modules from.

Keep the pics coming! :-D

[_Dejan_]

Little update in my car :D
What is new? Im decide that I will make one step closer to SQ system...
Audison LRx 4.1k will not be anymore in my car and will be replaced with VRx4.300 and later will add VRx2.150.
Onboard soundcard will be replaced with other one(All in right time)...
BitOne will not be anymore in my car(I think)...

Few photos of new system:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Jetway.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Case1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Case2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Case3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Case4.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Case5.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Case6.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Case7.JPG

Case have two PCI slots and sound card need two slot so is right choise

[DB-Audio]

**** dude you got some serious pc skills i've always wanted a voom pc in my truck but didnt know if it would be worth it great work

[_Dejan_]

Today Im receive my packet. Lets go look what is inside:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT3.JPG

Look closer:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT4.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT5.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT6.JPG

And expansion card:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT7.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT8.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT9.JPG

[_Dejan_]

Installed:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT10.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT11.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT12.JPG

I must change Raiser card because this is not so good:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT13.JPG

Final look:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/ClaroHaloXT14.JPG

More in next days when I receive new packets...

[DB-Audio]

lucky bastard

[2fnloud]

What are you using to get the finish of your bezels and tweeter pods? they look like perfect factory finish, right down to the texture.

[_Dejan_]

What are you using to get the finish of your bezels and tweeter pods? they look like perfect factory finish, right down to the texture.

This is make my friend for me. Im not good with poliester and colors :D He is use color spray and spray it...

[k_schutte]

OOOH... Shiney (sorry, this thread is WAY over my head)

[_Dejan_]

Few details about sound card:
-C-Media Oxygen HD CMI8788 Audio Processor
-TPA6120A2 - Built in 120dB Headphone AMP IC from TI supports up to 600ohm headphone
-Swappable OPAMP socket for all analog channels. Factory installed opamps are 4580 (JRC)
-8 RCA Outputs, digital optical Input&Output, digital coaxial Input&Output(On PIN Header), MIC input, line input, headphone output, MIDI in/output(PIN header), CD IN, AUX IN...
-Support: Dolby Digital Live, Pro Logic IIx, Dolby Headphone, DTS INTERACTIVE, DTS NEO:PC
...

[_Dejan_]

Today Im start with configuring my audio system...
First design of my active system:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Console.JPG

Crossovers and EQ prepared - In picture left tweeter(UP) and MID(Down):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Console2.JPG

And Time Delay for one channel:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Console3.JPG

[energizedsbs]

wow.. this is cool as hell

[power-fanatic07]

nice work man

[misfit138]

This guy does phenomenal work...

[_Dejan_]

Today Im receive amplifier(Audison VRx4.300):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/AudisonVRx4_300-1.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/AudisonVRx4_300-2.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/AudisonVRx4_300-3.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/AudisonVRx4_300-4.JPG

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/AudisonVRx4_300-5.JPG

[Annnarbor84]

Awesome build:)

[chardy85]

I am speechless. I work in IT and also consider myself somewhat knowledgeable in car audio, at least with the basics.....non active systems...etc

BUT, you sir know the electronic details of ALL!

I will be visiting this thread and reading through it multiple times!

Thank you

[_Dejan_]

Let look what Im do in last days...

First mounting and connecting new power supply:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/M4-ATX.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/M4-ATX-2.JPG

Im get new battery which will be in boot...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/FiammFLB400.JPG

2x :)
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/FiammFLB400-2.JPG

New VGA cable:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/VGACable.JPG

Tomorrow I will continue...

[Annnarbor84]

Cant wait to see the finished product:)

[_Dejan_]

Few new pictures...

First Im connect batteries together:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/FiammFLB400-3.JPG

Then Im find place where will have power cable in engine place...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/PowerCable-1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/PowerCable-2.JPG

I must fix it that cable can't move...

Im make plate where will be mounted amplifiers, carpc...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-2.JPG

And battery charger(Copy of CTEK XS 3600)
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Charger.JPG

[MakeshiftAudio]

Finally someone that knows what they're doing.

Props for making instead of buying the TTL->USB.

Very nice job here.

[headlesskoopa]

wow

[_Dejan_]

What Im do today :D
First ground...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Ground.JPG

Then marking positions...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-3.JPG

Holes...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-4.JPG

Amplifiers...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-5.JPG

Power terminal...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-6.JPG

[_Dejan_]

Today my boot look like this:

http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-7.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-8.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/Boot-9.JPG

Im turn on amplifiers and play trough phone because Im searching which cable go to which speaker(unmarkedcables.press)...

[Santoro300]

Im make post in this thread.

[DB-Audio]

looks nice

[Johnny Law.Lulz]

Whered that distro/ground block come from.

I want one.

[_Dejan_]

Whered that distro/ground block come from.

I want one.

Audison Connection SFD41C (http://www.connectionaudison.com/products/accessories/sfd41c.htm) ;)

[_Dejan_]

Today Im try mesaure my system with TrueRTA and get next results:
First mesaure noise in car:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/NoiseFloor.JPG

Im not shure if dB is ok I think it must be cca. 10-20dB lower...
Then Im mesaure Left MID (Full Range):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/MIDLeft.JPG

And Right:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/MIDRight.JPG

Tweeter(BugPass filter at 1.5kHz you can see slope)...
Left:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/HIGHLeft.JPG

Right:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/HIGHRight.JPG

For first mesaure I think that results are ok, but I must check why sound go +/- 5dB...
In generator Im use "Pink Noise" and leave it 10sec. to make average. I think that with "Quick Sweep" has been signal more linear...

[_Dejan_]

Today Im make new mesaures with less noise :D
In my previous post Im change pictures with new results(Except noise graph)... Here is few new results...

SUB (Full Range):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/SUB.JPG

Left MID+TW(MID: 63Hz<->3kHz - BugPass TW: 3kHz - BugPass):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/MID_HIGHLeft.JPG

Right MID+TW(MID: 63Hz<->3kHz - BugPass TW: 3kHz - BugPass):
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/MID_HIGHRight.JPG
And all speakers together:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/RTA1/All.JPG

[creeps228]

Nice work man...wish i had your talent... way to go

[_Dejan_]

Hi,
Currently nothing special in my garage :D For car Im buy 15" alloy's and Goodyear UltraGrip 7+ tyres...
Here is another toy which I have :D
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/AudisonVRx2_400-1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/AudisonVRx2_400-2.JPG

Also this winter I have plan damping car...

[NhustlaR]

wow. That is some amazing work. Not many people have the patience to really take their time and do things right the first time. You must have a lot of time (and or money) on your hands. Great progress and I am in awe that your built that carputer. Awesome job so far!

[Mr. Slate]

Very nice.

[_Dejan_]

I think it is time to little update my thread :D
First Im replace my sound card to new one:
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/M_Audio_1010LT_1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/M_Audio_1010LT_2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/M_Audio_1010LT_3.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/M_Audio_1010LT_4.JPG

Then Im install 10Hz SparkFun Venus GPS module. Normal USB GPS have update rate 1Hz which mean that update position every second. This module update position 10x in one second... Because TTL 232R cable have VCC 5V board need 3.3V Im make little modification. Signal voltage is 3.3V which is OK...
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/FTDI_TTL_232R_3V3_WE.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/SparkFun_Venus_GPS_10Hz_1.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/SparkFun_Venus_GPS_10Hz_2.JPG
http://www.bukowc.com/Galerija/Avtomobilizem/Stilo/CARPC4/SparkFun_Venus_GPS_10Hz_3.JPG

Now I waiting for new good DSATX 220 power supply which Im using in one of my older carpc...

[_Dejan_]

Here is something new what I will test and install into car when I came from vacation:

http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDIGI_1.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDIGI_2.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_1.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_2.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_3.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_4.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_5.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_6.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_7.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSP_8.JPG

[_Dejan_]

Software:
Input gain:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSPPlugin_1.JPG
Parametric EQ on input (Same is on each output):
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSPPlugin_2.JPG
Crossovers:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSPPlugin_3.JPG
Output gain, time correction and phase:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC4/MiniDSPPlugin_4.JPG

One board will be used for TW + MID another one for MIDBASS + SUB, third is input board(optical or SPDIF)...

[hrtbrk1]

Amazing!

[_Dejan_]

Long time ago Im update my thread and Im change few things...
First Im change brake pads and rear discs:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/EBCBrakes1.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/EBCBrakes2.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/EBCBrakes3.JPG

Because my carpc has stop working Im decide to buy and build new one:
First Im take my old AM/FM radio device and little modify it:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/FMRadio1.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/FMRadio2.JPG

Then Im add CANUSB device which get CAN data and will be used for diagnostic and steering wheel commands:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/CANUSB1.JPG

Put all into case:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/Case1.JPG

DVD device for MP3, Audio CD, Video CD(Divx and other formats), DVD Video, DVD Audio:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/Case2.JPG

Mounted CANUSB and GPS into case:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/Case3.JPG

All components:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/Case4.JPG

[_Dejan_]

Then Im figure out that my Intel SSD has die too and Im replace it with new one:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/OCZAgility3_1.JPG

Closed case:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/Case5.JPG

All connectors which I need it(Wifi, GPS, USB2, USB3, eSATA, optical audio out, CAN, Video...) are here:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/ZotacH67_1.JPG

And mounted case:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/CARPC5/Case6.JPG

[bubbagumper6]

wow, your going to be able to view CAN diagnostic messages on your display? That's pretty impressive...

[_Dejan_]

wow, your going to be able to view CAN diagnostic messages on your display? That's pretty impressive...

I will not show CAN diagnostic messages on LCD I will sniff CAN messages, decode it and do actions(Play/pause, next song...) show values on screen(temp, speed, odometer, fuel consumptions...)

[crucial24]

Really loving this Carputer build man!

[_Dejan_]

So need to work on ...
What to replace? Tomorrow I will replace the steering wheel with a new multifunction steering wheel...

First Im find a new spiral cable because the original is missing three contacts:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SpiralCable1.JPG

Steering wheel:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel1.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel2.JPG

The new steering wheel seems to have enough buttons to operate the new digital dashboard :) :D

[_Dejan_]

Im install and connect new steering wheel ...
First one picture of the original steering wheel:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel3.JPG

Removed the original steering wheel and a spiral cable:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel4.JPG

In the connector is necessary to add 3 new cables CAN A, CAN B and lighting:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel5.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel6.JPG

New spiral cable is installed:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel7.JPG

Work is completed:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel8.JPG

Today I will finish CAN plugin for Centrafuse and testing tomorrow if the controls operate normally and it will temporarily managed CarPC ...

[_Dejan_]

Illumination:
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/SteeringWheel9.JPG

And the video how buttons work in conjunction with CarPC:

http://www.youtube.com/watch?v=tbqfy33ttBg

Im not show Voice Recognition button because I do not have a microphone connected to the CarPC...

[_Dejan_]

Here are few photos with new alloys :)

http://www.carpc.si/Galerija/Avtomobilizem/Stilo/Stilo16.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/Stilo17.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/Stilo18.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/Stilo19.JPG
http://www.carpc.si/Galerija/Avtomobilizem/Stilo/Stilo20.JPG

[MiniflexAlex]

You Sir have a gift :applause:

[ffkk]

:crazy:

Awesome work!

[SourDeez]

lol this bro replaced everything in his car