PDA

View Full Version : Design me a enclosure please



lambo37
04-08-2008, 11:26 PM
So id like to go with one 18 in Fi BL, definately a ported box...

Its going in a 1994 grand prix.

Id like it tuned to 34hz...(is this a good hz?)
I have lots of room when i take the backseat out.

Heres the specs on the sub

Fs: 33.1 Hz | 32.5 Hz
Re: 0.75 Ohms/coil | 1.5 Ohms/coil
Qms: 6.43 | 6.54
Qes: .53 | .49
Qts: .49 | .46
Mms: 280g | 290g
Cms: 0.13mm/N | 0.13mm/N
Sd: 1210cm^2 | 1210cm^2
Vas: 169.7 l | 169.7 l
Spl: 92.5dB 1W/1m | 92.6dB 1W/1m
Bl: 12.8 N/A | 19.0 N/A
Xmax: 21mm
Rms: 1000W *
Sealed box: N/A cuft
Ported box: 5-10 cuft @ 30-37Hz
Sub OD: 18.500
Cut ID: 16.750
Mounting depth: 9.750
Displacement: 0.23cuft


THANKS, any more ?'s ask me.

PS:this will be on or around 1500-1800 watts.

blackbonnie
04-08-2008, 11:31 PM
so what size box do you want, and what are your max dimensions

lambo37
04-08-2008, 11:43 PM
so what size box do you want, and what are your max dimensions

, um well IF AT ALL possible it would be cool if i could fit in the trunk, with sub up port back ro something.........but otherwise i have ALOT of room with the backseat out...so really whatever works for you. hah, although i dont have much depth, MAYBE 30in, basically whatever works for you. Remember though, i want a 18inch....thanks

ssj2xxgotenxx
04-09-2008, 02:04 AM
, um well IF AT ALL possible it would be cool if i could fit in the trunk, with sub up port back ro something.........but otherwise i have ALOT of room with the backseat out...so really whatever works for you. hah, although i dont have much depth, MAYBE 30in, basically whatever works for you. Remember though, i want a 18inch....thanks

NO, you need to be more specific! Don't be lazy, and get yourself a tape measure the dimensions of your car. There isn't any, "whatever works" in box building, it's a precise and methodical process that requires a ton of attention to detail. If you come into it with an attitude like that, your box is going to be a piece of ****.

lambo37
04-09-2008, 10:39 AM
NO, you need to be more specific! Don't be lazy, and get yourself a tape measure the dimensions of your car. There isn't any, "whatever works" in box building, it's a precise and methodical process that requires a ton of attention to detail. If you come into it with an attitude like that, your box is going to be a piece of ****.

chil out guy, i thought it would be easier? Ill have to measure after school then..

lambo37
04-09-2008, 02:13 PM
bump please?

Screnzo
04-09-2008, 02:17 PM
Trunk measurements bro, get em. Most people can whip up a design for like 10-15 bucks if they have the measurements...

lambo37
04-09-2008, 02:25 PM
No one will do it for free? the measurements of the trunk are roughly 40w 40d, and 18h

RAM_Designs
04-09-2008, 02:25 PM
let me know when you get your dimensions...I'll design a good box for you.

http://i45.photobucket.com/albums/f92/RyanM923/DD3510.jpg
http://i45.photobucket.com/albums/f92/RyanM923/box.png
http://i45.photobucket.com/albums/f92/RyanM923/RandomBoxDesigns/Dual12TC9_35hz.jpg

lambo37
04-09-2008, 03:11 PM
Uh i measured before i think their on roe ill go check........those look really good.

edit: its 38 in width, 18 in in height, and 38 in in depth, thanks so much
Double edit: will a sub up, port back/front sound good in a trunk with an 18??? Or should i just go 15?

lambo37
04-09-2008, 04:08 PM
Bumptt

lambo37
04-09-2008, 11:42 PM
bump to top, anyone?

miker
04-10-2008, 12:29 AM
Alright.. Get down what sub you want, and I can do something quick..

lambo37
04-10-2008, 10:31 AM
Alright.. Get down what sub you want, and I can do something quick..


Fi BL 18in, or else 15in, if you can make a good 15in ported box fit in the trunk.......id rather have 18 tho.:cool:

iDesignBoxes
04-10-2008, 03:00 PM
let me know when you get your dimensions...I'll design a good box for you.


Solid designs. I thought we couldn't advertise in the signature?

:confused:

lambo37
04-10-2008, 07:53 PM
Does anyone know a forum that is more active? And actually helps...........its been 2 days. :(

Trez0r
04-10-2008, 08:01 PM
.. Design me a box for an 18 in or 15 in, if you can make a good 15in than make that, I would rather have an 18 though..

WTF, are you retarded in the head?

You havent got any help because one, your a ******* and dont know what the hell you want and two, you just expect people to help you out with the snap of a finger for free. You also joined 2 days ago..

Also a forum that is more active? This is the #1 car audio forum on the intraweb, if no one wants to help you here I guess your SOL.

I pay for my designs :fyi:

BrianChia
04-10-2008, 08:04 PM
.. Design me a box for an 18 in or 15 in, if you can make a good 15in than make that, I would rather have an 18 though..

WTF, are you retarded in the head?

You havent got any help because one, your a ******* and dont know what the hell you want and two, you just expect people to help you out with the snap of a finger for free. You also joined 2 days ago..

Also a forum that is more active? This is the #1 car audio forum on the intraweb, if no one wants to help you here I guess your SOL.

I pay for my designs :fyi:

^ for real.

At least decide on a subwoofer first and give actual max dimensions. When you measure max dimensions you need to accomodate being able to get the box into the trunk, FYI. Then some nice people might do it for free. Or else you'll have to pay someone.

lambo37
04-10-2008, 08:26 PM
^ for real.

At least decide on a subwoofer first and give actual max dimensions. When you measure max dimensions you need to accomodate being able to get the box into the trunk, FYI. Then some nice people might do it for free. Or else you'll have to pay someone.


ok dude, for the fifth time(yes i counted), IM GETTING AN FI BL, and if anyone makes me a box, they can make it for a 15 or an 18.......I GAVE max dimensions. And theirs atleast 2 left on all sides of trunk..besides height(that'll be tight):P. thanks

Trez0r
04-10-2008, 08:28 PM
ok dude, for the fifth time(yes i counted), IM GETTING AN FI BL, and if anyone makes me a box, they can make it for a 15 or an 18.......I GAVE max dimensions. And theirs atleast 2 left on all sides of trunk..besides height(that'll be tight):P. thanks

HOLY ****, KILL YOURSELF.

If I was a making a box for you, say I make you an 18" box for free, taking time out of my day, than you cant fit an 18" in your trunk, or you decide to get 2 12's, you wasted time out of my day (box designers day), just fkin choose something get 10 dollars in your paypal and you can have someone design you a box in no time.

But I guess your too fked up in the head to understand common sense.

lambo37
04-10-2008, 08:34 PM
HOLY ****, KILL YOURSELF.

If I was a making a box for you, say I make you an 18" box for free, taking time out of my day, than you cant fit an 18" in your trunk, or you decide to get 2 12's, you wasted time out of my day (box designers day), just fkin choose something get 10 dollars in your paypal and you can have someone design you a box in no time.

But I guess your too fked up in the head to understand common sense.

K dude your a ****ing spazoid, IF YOU COULD READ, you could see, that i said if the box designer makes it for an 18, I WILL PUT IT IN MY BACKSEAT. ALSO anyone that makes me a good working box i will glady send 10-20$ on paypal.

ssj2xxgotenxx
04-10-2008, 08:36 PM
At this point in time, I don't think anyone on this forum is willing to help you anymore. Grow some balls first and come back when you're ready to take this **** seriously. Your problem is your too indecisive and you can't give us the information that is needed to design a box for you. Go to Circuit City for the meanwhile kid.

lambo37
04-10-2008, 08:39 PM
At this point in time, I don't think anyone on this forum is willing to help you anymore. Grow some balls first and come back when you're ready to take this **** seriously. Your problem is your too indecisive and you can't give us the information that is needed to design a box for you. Go to Circuit City for the meanwhile kid.

I have gaven everything though..?

Max dimensions..
sub..
car..
theirs literally like nothing else? correct me if im wrong.

Trez0r
04-10-2008, 08:39 PM
K dude your a ****ing spazoid, IF YOU COULD READ, you could see, that i said if the box designer makes it for an 18, I WILL PUT IT IN MY BACKSEAT. ALSO anyone that makes me a good working box i will glady send 10-20$ on paypal.

Im not a spazoid..<--?

I just fkin hate these stupid 16 year old kids, who are too stupid to know what they want and expect everything done for free.

Also I highly doubt you will send someone 10-20$ if they design you a box, if you said that in your OP you wouldn't be *****ing and complaining about how this forum isnt active and no one wants to help you.

If your paying someone money for a design, talk to IonSQL and he will design you a box.

feg

lil_italy773
04-10-2008, 08:40 PM
^^^^werd all the above comment @ lambo37, better luck next time bro

Trez0r
04-10-2008, 08:42 PM
BTW, welcome to CA.com

lambo37
04-10-2008, 08:48 PM
No id gladly pay someone, i would want the same thing......i just sent 12.00 to someone on paypal from roe.....i just bought 150$ of knukonceptz wiring...money is not an issue.

The only reason i wouldnt pay upfront is to make sure the box is right.

Ha i come off as a huge **** i imagine..:(

ssj2xxgotenxx
04-10-2008, 08:56 PM
It's not a matter of the money. People will only help you if they WANT to help you. $10 - $20 isn't **** and isn't worth help someone who doesn't want to be helped. We had to TELL you to give us the dimensions, THEN we had to help you decide on which driver you wanted. Next time, help us help you, and not EXPECT us to do everything for you.

BrianChia
04-10-2008, 10:15 PM
4.0 cf @ 33 hz.

http://img406.imageshack.us/img406/5861/11540cf33hzwj3.png

lambo37
04-10-2008, 11:03 PM
It's not a matter of the money. People will only help you if they WANT to help you. $10 - $20 isn't **** and isn't worth help someone who doesn't want to be helped. We had to TELL you to give us the dimensions, THEN we had to help you decide on which driver you wanted. Next time, help us help you, and not EXPECT us to do everything for you.

iv known what sub i wanted for about 2 weeks...but nice try buddy.

lambo37
04-10-2008, 11:05 PM
4.0 cf @ 33 hz.

http://img406.imageshack.us/img406/5861/11540cf33hzwj3.png


That looks rly nice, but ? Why did you make it 18' tall, if i can only put a 15 in it?, if you have a reason explain please, otherwise thanks for your time.

BrianChia
04-10-2008, 11:07 PM
That looks rly nice, but ? Why did you make it 18' tall, if i can only put a 15 in it?, if you have a reason explain please, otherwise thanks for your time.

Because I think a 15" will be more than enough for your car.

lambo37
04-10-2008, 11:16 PM
Because I think a 15" will be more than enough for your car.

icic haha, well that looks good, mikers making me an 18'design though...thankx again

Trez0r
04-11-2008, 02:23 AM
icic haha, well that looks good, mikers making me an 18'design though...thankx again


.. Design me a box for an 18 in or 15 in, if you can make a good 15in than make that, I would rather have an 18 though..

rofl see what I mean? completely wasted his time :)

lambo37
04-11-2008, 02:27 AM
rofl see what I mean? completely wasted his time :)

Dude stop tryin to start a flame war, if your so busy spend your fucing time doing your busy ****. For the last time, i clearly said in OP id rather have an 18......i also said what sub/the specs of said sub, in short, take your bulshit elsewhere. Kthxbai

Trez0r
04-11-2008, 02:32 AM
Dude stop tryin to start a flame war, if your so busy spend your fucing time doing your busy ****. For the last time, i clearly said in OP id rather have an 18......i also said what sub/the specs of said sub, in short, take your bulshit elsewhere. Kthxbai

Hahhahaaha, when did I ever say im busy? Obviously im not busy atm if im starting a flame war with you, ill keep my bullshit right here :)

Silly kids.

Kthxillstay.