PDA

View Full Version : sound deadened passenger door. pic



NoobieAudio
03-26-2008, 11:44 PM
before http://i215.photobucket.com/albums/cc179/Deadmonksauce/door2.jpg
1/6 done http://i215.photobucket.com/albums/cc179/Deadmonksauce/door22.jpg
all done http://i215.photobucket.com/albums/cc179/Deadmonksauce/door23.jpg

i got about three layers in the inside and 2 on the outside. made a CRAZY difference already. my bass out put not only in the coaxil but the subs increased! i was amazed. and the door sounds so **** when closing.

duece212
03-26-2008, 11:45 PM
Nice. Deadening is such a PITA, but the results are well worth it.

mk_
03-26-2008, 11:47 PM
/\ Truth

dumple
03-26-2008, 11:47 PM
looks good wish my door was so plain lol PITA to do the exterior

filtor1
03-26-2008, 11:48 PM
Great job!

NoobieAudio
03-26-2008, 11:52 PM
ty ^^ was my first time using it. gonna try and get atleast half the driver door tomorrow before work. also gonna try to do the back of the cab with pics after. then about a week from now the roof

NoobieAudio
03-26-2008, 11:53 PM
eventually gonna cut out the dyna mat over that space area and put some plexiglass over it and re dampin it

zeuolaxxx
03-27-2008, 08:58 AM
Nice Job

Hydrastas
03-27-2008, 09:06 AM
sound deadener actually works?

DejaWiz
03-27-2008, 11:21 AM
sound deadener actually works?

Was there a doubt?

jeeper07
03-27-2008, 11:23 AM
i use the same anti freeze

NoobieAudio
03-27-2008, 12:33 PM
sound deadener actually works?

holy crap man hell yeah. i just finished the inside of the driver's door. HUGE DIFFERENCE. i used to turn my HU up to 28 to hear it loud. anything pass that would distort for lack of amp. now i get it louder and clearer then 28 when it is at 23. holy crap i also have one crack as hell P1 (pics?)and it sounds **** good now too. i did 3 layers in the inside of the door and 2 on the out side. so sick now. it is a must do but do it right. don't half *** it and complain about results

NoobieAudio
03-27-2008, 12:33 PM
i use the same anti freeze

it's cheap and it works :-)

danz24
03-27-2008, 01:36 PM
holy crap man hell yeah. i just finished the inside of the driver's door. HUGE DIFFERENCE. i used to turn my HU up to 28 to hear it loud. anything pass that would distort for lack of amp. now i get it louder and clearer then 28 when it is at 23. holy crap i also have one crack as hell P1 (pics?)and it sounds **** good now too. i did 3 layers in the inside of the door and 2 on the out side. so sick now. it is a must do but do it right. don't half *** it and complain about results

How can you do it wrong???

krisfnbz
03-27-2008, 01:46 PM
Great job...!

vipervin
03-27-2008, 01:51 PM
Nice. Deadening is such a PITA, but the results are well worth it.

fo reals.. doing the whole car takes forever, but **** what a difference.

tez4life
03-27-2008, 02:03 PM
i use the same anti freeze


Peaks FTW!!

And to the OP, nice deading job on the doors, im glad your enjoying the difference.

oldford
03-27-2008, 08:39 PM
Nice job but looks like you forgot a little spot...the inside of the whole outer door skin!

PremierAudio
03-27-2008, 08:43 PM
looks good man, youre going to love it.

Fast1one
03-27-2008, 10:57 PM
Do you do the inside of the outer skin? (the part with paint...)

NoobieAudio
03-28-2008, 01:08 PM
no i didn't miss that area. that is where i have my three layers. just bad angle in that picture. let me show you a pic up close on the drivers door. almost done now too :-) http://i215.photobucket.com/albums/cc179/Deadmonksauce/driver.jpg

NoobieAudio
03-28-2008, 01:12 PM
http://i215.photobucket.com/albums/cc179/Deadmonksauce/driverdoor.jpg

kmu
03-28-2008, 04:04 PM
http://i215.photobucket.com/albums/cc179/Deadmonksauce/driverdoor.jpg

Is there alot of difference in doing just the outer panel vs doing the inner and outer panel just like in your pics?

ronjon228
03-28-2008, 05:25 PM
Is there alot of difference in doing just the outer panel vs doing the inner and outer panel just like in your pics?

+1

I don't think it's a possibility to get to the inner door on my Regal. No big enough through holes. :(

NoobieAudio
03-28-2008, 10:51 PM
+1

I don't think it's a possibility to get to the inner door on my Regal. No big enough through holes. :(

i think it made a huge difference. road noise has gone way down. before if you knocked on my door you would hear the metal sound now it is a light thump and it is sold. i think tha layer in particular helps a lot with SPL. which helps your system be louder, and i feel it is a must to do that inside panel. that is why i did three layers :-)