PDA

View Full Version : FS - Craftsman Teardrop Ratchets



sqhertz
03-24-2008, 11:52 AM
got two complete sets , so im getting rid of one.
#44809 , 44808 , and TWO 44807.
1/2" , 3/8" and two 1/4" drive. ive used them less than 5 times. still look and work like new. life time warranty through sears. you break it , go there , you get a new one. simple , no hassle warranty.
individually , they would sell for $63 total. ill let all 4 go for $40 shipped.

i can get pics if you really need me to.

also have a craftsman pro 12v drill , and a craftsman pro plunge/fixed base router combo , missing collets , that ill get rid of if anyone is interested.

:)

jeeper07
03-24-2008, 11:54 AM
pics of everything but drill? very interested.

sqhertz
03-24-2008, 12:02 PM
pics of everything but drill? very interested.


router too? give me a min..

jeeper07
03-24-2008, 12:02 PM
yes router too please

sqhertz
03-24-2008, 12:10 PM
i must note , one of the handles on the plunge base it loose. dont know if the screw needs to be tightened , or just a new handle. both the 1/2" and 1/4" collets can be ordered for around $20 a piece through sears parts. it retailed for $199 brand new, not too sure what to ask for it...

pics up in a minute...

sqhertz
03-24-2008, 12:15 PM
http://i95.photobucket.com/albums/l153/sqhertz/crap008.jpg
http://i95.photobucket.com/albums/l153/sqhertz/crap005.jpg
http://i95.photobucket.com/albums/l153/sqhertz/crap004.jpg

http://i95.photobucket.com/albums/l153/sqhertz/crap003.jpg
http://i95.photobucket.com/albums/l153/sqhertz/crap002.jpg
http://i95.photobucket.com/albums/l153/sqhertz/crap001.jpg


i also have ONE of the wrenches used top remove the collets. i think i got the 16mm , the other is a 24mm , iirc.

sqhertz
03-24-2008, 12:21 PM
just checked out the handle , and all it needs is to be tightened. its a #20 torx to get the outside off and a #30 torx? to tighten it to the base. i just dont have that big of a bit at the moment. but im pretty sure thats all it needs..

jeeper07
03-24-2008, 12:24 PM
how much are u lookin for for all of it? minus the drill of course

sqhertz
03-24-2008, 12:30 PM
i can do $100 shipped for everything but the drill....


one more thing , in the pic with the routers , you can see its missing the dust sheild for the plunge base. i think that covers about everything. i can get it shipped out today if youd like.

sqhertz
03-24-2008, 09:25 PM
any more interest?

squeak12
03-24-2008, 09:57 PM
Pm me if you will sell just one of the 3/8" drive ratchet, I seem to have lost mine.

TeamPSI
03-24-2008, 10:35 PM
I have a bunch of those ratchets! Theyre GREAT!

The only one I have ever "broken"... It melted when my Blazer BURNT to the ground. The selector lever melted off a bit, but it still works perfectly! haha

TTT

davidfre21
03-24-2008, 10:51 PM
pics of the drill again and what all comes with it?

sqhertz
03-24-2008, 11:08 PM
sorry , i wont separte the ratchets. wont really be worth it for me. :crap:

they are great though. i cant tell you how many people buy them at work. you really got to beat them to **** for them to break.


drill pics -

http://i95.photobucket.com/albums/l153/sqhertz/1006.jpg
http://i95.photobucket.com/albums/l153/sqhertz/1007.jpg
specs -
380 in/lbs torque
two speed gear box 0-800/-1500 rpm
variable speed

comes with the drill , two batteries and a charger, no case. i got the 14v version and its friggen great. i can give you more specs tomorrow if youd like. the manual for my 14v covers the 12v , 14v, and 18v models.

davidfre21
03-24-2008, 11:15 PM
ill check my bank over the next couple days and see if i can come up with an offer. Dont have much use for it sense i have a 14.4v xrp dewalt but it might be nice to have a second for smaller jobs

sqhertz
03-24-2008, 11:18 PM
sounds good. it has the same weight and feel as the dewalts , not sure on the power though. the batteries are a bit cheaper too.

dleccord
03-25-2008, 06:35 AM
you got any polished 1/2" craftsman ratchets?

btw, occasionally they'll give you a new ratchet but i always get the one under the counter, kind of like a refurbished one.

sqhertz
03-25-2008, 08:37 AM
you got any polished 1/2" craftsman ratchets?

btw, occasionally they'll give you a new ratchet but i always get the one under the counter, kind of like a refurbished one.



just got a set of the polished , thats why im getting rid of the teardrop.
the ones under the counter are refurbished. nothing wrong with those. except for the fact that they all use the same rebuild kit, even the polished ones, iirc. but if you were to ask , they should give you one off the shelf. we do at our store.

:)

dleccord
03-25-2008, 03:40 PM
just got a set of the polished , thats why im getting rid of the teardrop.
the ones under the counter are refurbished. nothing wrong with those. except for the fact that they all use the same rebuild kit, even the polished ones, iirc. but if you were to ask , they should give you one off the shelf. we do at our store.

:)

store eh? can you hook me up with a discount on that polished 1/2" ratchet?

sqhertz
03-25-2008, 06:16 PM
store eh? can you hook me up with a discount on that polished 1/2" ratchet?

lol , i only get 10% off. iirc , they go for $33. then to ship and PP fees...youd be better off just buying one. i MAY be able to do something for you though...im on lunch now. when i get back home ill let you know. you just need the 1/2" , or the whole set?

dleccord
03-25-2008, 09:22 PM
i pretty much got the polish 1/4 and 3/8....just need the 1/2 to complete the craftsman professional set.

sqhertz
03-25-2008, 10:20 PM
i pretty much got the polish 1/4 and 3/8....just need the 1/2 to complete the craftsman professional set.

ah , completly forgot about that, sorry. but like i said , it really wouldnt be worth it for just the one ratchet....

sqhertz
03-26-2008, 06:00 PM
up.

davidfre21
03-26-2008, 08:19 PM
take 40 for drill?

sqhertz
03-26-2008, 10:35 PM
take 40 for drill?


let me sleep on that. ill let you know tomorrow after court.

sqhertz
03-27-2008, 05:49 PM
up.

davidfre21
03-27-2008, 10:23 PM
u sleep well? :D lol

sqhertz
03-27-2008, 11:13 PM
u sleep well? :D lol


how about $50 shipped? thats including PP fees , shipping , insurance...

davidfre21
03-27-2008, 11:36 PM
cant do it sorry, im tryin to get into a house and really shouldnt be spending the 40 as is lol. But if i was able to get it id sayed **** it.

sqhertz
03-28-2008, 09:28 PM
uppoz..

sqhertz
03-29-2008, 05:35 PM
someone buy something..

sqhertz
03-30-2008, 09:23 PM
up.

sqhertz
03-31-2008, 10:28 AM
up.

sqhertz
04-01-2008, 12:15 AM
up.

sqhertz
04-01-2008, 11:19 AM
up.

sqhertz
04-01-2008, 08:32 PM
upp.

sqhertz
04-02-2008, 06:29 PM
up.

sqhertz
04-03-2008, 10:26 AM
argh.

sqhertz
04-03-2008, 11:02 PM
...........

sqhertz
04-04-2008, 06:02 PM
up.

foreman
04-04-2008, 11:05 PM
Left you a PM

sqhertz
04-05-2008, 12:46 PM
replied.

up.

sqhertz
04-05-2008, 06:45 PM
router is pending sale..

sqhertz
04-06-2008, 05:46 PM
up.

integra88
04-06-2008, 05:54 PM
Are the ratchets still available???:cool:

integra88
04-06-2008, 07:36 PM
You have a PM

sqhertz
04-06-2008, 09:52 PM
replied.

sqhertz
04-07-2008, 01:47 AM
ratchets pending. drill still up for sale. $60 obo.

sqhertz
04-07-2008, 11:09 PM
router is sold.

sqhertz
04-08-2008, 11:25 PM
drill anyone?

sqhertz
04-09-2008, 07:21 PM
meh?

AeR0
04-10-2008, 03:20 PM
ratchets still up for sale?

sqhertz
04-10-2008, 04:15 PM
sale is pending. ill post here if they are available again.