PDA

View Full Version : On this box plan what thickness MDF is it for?



Bipolar
03-24-2008, 03:48 AM
I'm building 2 different boxes for my RE SX 15" and I need to know what thickness MDF is this plan drawn to use? If im thinking right if you dont use the right thickness MDF for the plan then all the measurements will be off right??

http://img35.imageshack.us/img35/558/5cubes32hz62sqin6hk.png

Reson8
03-24-2008, 03:59 AM
I would be surprised if it was for anything other than 3/4's. Almost all boxes are built with that thickness in mind except for either the extremely cheap or the extremely hardcore.

blackbonnie
03-24-2008, 04:06 AM
it is 3/4 mdf

bumpin buick
03-24-2008, 04:18 AM
I just went and bought MDF today, no one even touched the pallets of the 5/8 or 1/2 it looked like that stuff had been sitting and collecting dust for weeks. I think most any box plan is to 3/4

Bipolar
03-24-2008, 10:14 AM
Thats what I thought..thanks..BTW How much MDF do you think it would take to make this box?

xtremebassjunky
03-24-2008, 10:19 AM
i like 1" :D

but that looks like 3/4"

eric12421
03-24-2008, 12:06 PM
It's 3/4 and I'd say if your building two boxes you'll probably need 2 4x8 sheets of 3/4 mdf, around here in ri each sheet is like 24.98 i believe at home depot