PDA

View Full Version : In Need of Sub Box Design



SethPhillips
03-22-2008, 01:27 PM
Decided to run my 2- 12'' Fi ssd's in my 99 acura integra hatch.
i want the sub's and the port to both face the tail light's.
i listen to mostly rap, hip/hop, and r&b everyonce in awhile some hardcore speed death metal.. but that's only on monday morning's... to start the week off right;)
if someone could whip me up a cut sheet to give me something to do this saterday at work..
thanks
seth
my trunk dimensions:
From the back of my seat to the vary back of my trunk. 26" deep
lowest point of wheel well to other wheel weel 30'' wide
15'' tall

sub spec's:
Fs: 27.0 Hz | 26.3 Hz
Re: 0.75 Ohms/coil | 1.5 Ohms/coil
Qms: 4.60 | 4.71
Qes: .52 | .49
Qts: .47 | .44
Mms: 192g | 201g
Cms: 0.18mm/N | 0.18mm/N
Sd: 480cm^2 | 480cm^2
Vas: 58.7 l | 58.7 l
Spl: 85.3dB 1W/1m | 85.3dB 1W/1m
Bl: 9.3 N/A | 14.1 N/A
Xmax: 21mm
Rms: 800W
Sealed box: .8-1.6 cuft
Ported box: 1.8-2.5 cuft @ 33Hz
Sub OD: 12.500”
Cut ID: 11.125”
Mounting depth: 6.500”
Displacement: 0.14cuft

thanks
seth
p.s. i will paypal $5for a cut sheet of the best design i allso would like it to be braced internaly so there will be no box flex.... like my last box...

Max4hdmatt
03-22-2008, 01:32 PM
your gunna have to post your dimensions so someone can design you a box.

SethPhillips
03-22-2008, 01:38 PM
your gunna have to post your dimensions so someone can design you a box.

doing that right now. stand by...

ngsm13
03-22-2008, 01:40 PM
Lol.

nG

SethPhillips
03-22-2008, 01:44 PM
ok there posted...

SethPhillips
03-22-2008, 01:56 PM
i need something to do at work.. it's slow today..

SethPhillips
03-22-2008, 02:08 PM
cha-mone now! anyone?

ngsm13
03-22-2008, 02:09 PM
http://www.caraudio.com/forum/showthread.php?t=215849

nG

SethPhillips
03-22-2008, 02:19 PM
http://www.caraudio.com/forum/showthread.php?t=215849

nG
nG i love you and all for that.... but simple algebra! haha i can't do that.. i **** at math. big time... i mean talk about my grammer skill's... you dont wanna see my math skill's

iDesignBoxes
03-22-2008, 02:44 PM
Seth, check your pm's please.

Immacomputer
03-22-2008, 02:47 PM
I think I can get something to you within a day or so as I'm kind of busy today.

I own a '99 Integra hatch as well and I think I know my way around enclosures for them. Send me a PM if you want me to crank something out for you.

ngsm13
03-22-2008, 02:58 PM
I could do one in less than 5minutes... but I have to shower and leave for work...

nG

SethPhillips
03-22-2008, 03:02 PM
Seth, check your pm's please.
will do


I think I can get something to you within a day or so as I'm kind of busy today.

I own a '99 Integra hatch as well and I think I know my way around enclosures for them. Send me a PM if you want me to crank something out for you.
yea if you could man that be kick ***
ygpm


I could do one in less than 5minutes... but I have to shower and leave for work...

nG

if you could do it later.. no big rush.. i allways have sunday off.
thanks
nG!!!