PDA

View Full Version : Nitrous in! pix and vids



Towncar
03-17-2008, 10:25 PM
Well I thought I would start another thread since that one got rather long.

Alright well my car is finally done, I will have vids up later of some races hopefully. Right now Im running a 75 shot, which is my lowest shot in the kit I will boost it up to a 100 shot later in the week, and then upwards from there with the dynotune and all. She is running very nice.

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00179.jpg


http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00180.jpg


http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00181.jpg


http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00182.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00183.jpg

Towncar
03-17-2008, 10:26 PM
http://i210.photobucket.com/albums/bb199/mycrownvic01/th_MOV00185.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=MOV00185.flv)

rocky 59
03-17-2008, 10:29 PM
i give it 2 months before that valve train is more stretched then your moms mouth on my *****.

wErd
03-17-2008, 10:30 PM
haha, ur shits slow

bones22
03-17-2008, 10:30 PM
vid doesnt do much justice. looking forward to better ones

bumpin buick
03-17-2008, 10:31 PM
lucky, you got the easiest alt to change out mines under the motor

DBDRAGGUY
03-17-2008, 10:35 PM
What was that clicking sound on the deceleration?

Towncar
03-17-2008, 10:37 PM
haha, ur shits slow

You would be suprised, she is definately not slow. I will be racing a transam, and an ss later, so we will see just how slow I am.

bones22
03-17-2008, 10:37 PM
What was that clicking sound on the deceleration?

sounded like the valves hating him

Towncar
03-17-2008, 10:37 PM
What was that clicking sound on the deceleration?

My tray with loose change was open.

Towncar
03-17-2008, 10:38 PM
vid doesnt do much justice. looking forward to better ones

True coming soon.

bones22
03-17-2008, 10:38 PM
You would be suprised, she is definately not slow. I will be racing a transam, and an ss later, so we will see just how slow I am.

power to weight ratio it wont be pretty.

Towncar
03-17-2008, 10:39 PM
i give it 2 months before that valve train is more stretched then your moms mouth on my *****.

These cars can take a ton of abuse..

Towncar
03-17-2008, 10:40 PM
power to weight ratio it wont be pretty.

Like I said, we will see. Im only using the 75 shot right now, and will be using a larger shot later, but I like my chances of keeping up. Who knows though.

DBDRAGGUY
03-17-2008, 10:41 PM
My tray with loose change was open.

Oh. did you upgrade your fuel delivery? Bigger pump or a 2nd inline.

hoss
03-17-2008, 10:42 PM
i counted roughly 10 seconds 50 to 100...

ill beat you :fyi:

im jealous of your naws though :( . i want a powre adder in my car. if things work out though and i get a work vehicle, ill be going TT :D

hoss
03-17-2008, 10:42 PM
what car is this in?

crown vic

Towncar
03-17-2008, 10:46 PM
i counted roughly 10 seconds 50 to 100...

ill beat you :fyi:

im jealous of your naws though :( . i want a powre adder in my car. if things work out though and i get a work vehicle, ill be going TT :D

Eh, really cant go by the vid much. all windows down, ect.. We will see how I fair against the ss. Either way, Ive got plenty of more juice. 100 shot goes on later this week. yes the fuel pump, lines, spark plugs, and ect have been upgraded.

grassroots
03-17-2008, 10:49 PM
nawz but no intake? i bet you don't even have a huge spoiler and hood scoops... you need to learn how to pimp your ride proper...

hoss
03-17-2008, 10:50 PM
Eh, really cant go by the vid much. all windows down, ect.. We will see how I fair against the ss. Either way, Ive got plenty of more juice. 100 shot goes on later this week. yes the fuel pump, lines, spark plugs, and ect have been upgraded.

dont care, ill still beat you, by alot :fyi:

Towncar
03-17-2008, 10:51 PM
The intake is on its way..

Towncar
03-17-2008, 10:52 PM
dont care, ill still beat you, by alot :fyi:

The car is not done, nowhere near, and congrats for u.

hoss
03-17-2008, 10:56 PM
what else is in the works? and why on earth would you add nitrous if you plan on building the motor or adding a more stable power adder...

nitrous has one true application, race tracks. other than that, it is widely mis-used. what are your plans for FI?

Towncar
03-17-2008, 10:59 PM
I dont plan on rebuilding the motor until the end of the year or so. Right now, im just going to run all the way up to a 125 shot, and have it dynotuned for advanced timing, and ect. And as much boltons as I can get. Jmod for the tranny to help it shift faster. To many things to list that will be going on.

hoss
03-17-2008, 11:02 PM
i see no plans for FI.

without that and/or rebuilding the motor, all your efforts will be in vain in that car... still though, id be interested to see how your ET's improve or your 0-60's with each jet :)

Towncar
03-17-2008, 11:09 PM
eh, just out to have fun, Im pleased so far with it.

wErd
03-17-2008, 11:13 PM
eh, just out to have fun, Im pleased so far with it.

yea i know a few ppl with juice, just for fun. never drag.

Towncar
03-17-2008, 11:15 PM
I will drag when I get some more things in, and tweaked with the car.

deejaiatl3
03-17-2008, 11:17 PM
what type of car is this??????

jeeper07
03-17-2008, 11:20 PM
where are the pics of the grille?

Towncar
03-17-2008, 11:23 PM
what type of car is this??????

http://i210.photobucket.com/albums/bb199/mycrownvic01/th_MOV00841.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=MOV00841.flv)

Towncar
03-17-2008, 11:24 PM
where are the pics of the grille?

Didnt get a chance to put it on. Left the tools at the other house. Will do tomorrow.

jeeper07
03-17-2008, 11:25 PM
better get me some pics im exited to see how it looks.

deejaiatl3
03-17-2008, 11:25 PM
ahh does it have the police package????

Towncar
03-17-2008, 11:27 PM
Nah, its a civilian model, but ive done stuff..


http://i210.photobucket.com/albums/bb199/mycrownvic01/100_22741.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/100_22781.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/100_22751.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/100_22731.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/100_22771.jpg

IDSkoT
03-17-2008, 11:29 PM
Aww, it can't even peel out. My V6 Mustang can even peel out. :(

P.S. Nawz is the last thing you should add... but as long as you're happy with it, more power to ya'!

BTW-- how much does it cost to fill up a Nawz tank?

Towncar
03-17-2008, 11:30 PM
http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00139.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00140.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00141.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00142.jpg


http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00143.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00144.jpg

Stock set
http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00145.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00146.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00148.jpg

Towncar
03-17-2008, 11:30 PM
http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00149.jpg

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00151.jpg

Towncar
03-17-2008, 11:31 PM
Aww, it can't even peel out. My V6 Mustang can even peel out. :(

P.S. Nawz is the last thing you should add... but as long as you're happy with it, more power to ya'!

BTW-- how much does it cost to fill up a Nawz tank?

eh.. Its all in opinion. to many people with vics have have been doing it for years no problems. Its 38 and some change to fill up. btw, my car peels out easy. Bone stock it would peel out.

mazzasec
03-17-2008, 11:32 PM
what kinda car is that in? the town car?

Zakerid
03-17-2008, 11:35 PM
^are you fvcking kidding? read the thread.

mr_imperial
03-18-2008, 12:41 AM
looks awesome man. ive always wanted a marauder and do something like this (yes i know yours is a crown vic)

motox_727
03-18-2008, 04:14 PM
looks sweet but that thing has alot of miles on it be careful beating it or it wont last long

DownSouth954
03-18-2008, 04:19 PM
Haha I've been wanting to do the same setup with my Grand Marquis. Looks great!

2002XLT
03-18-2008, 04:26 PM
if the engine blows, he builds a new one. Stop hatin.

BASSMEKANIK
03-18-2008, 04:29 PM
you should put tha nitrous on a micro-switch that way it will only come on when your all tha way to tha floor and just put an arm switch on it...

THUMPPER
03-18-2008, 04:39 PM
you should put tha nitrous on a micro-switch that way it will only come on when your all tha way to tha floor and just put an arm switch on it...


that's what I did with my Mazda 626...
I had a 80/150 shot twin stage kit on it and it was ALOT of fun
but I went thru four $7,000 engines in 3 1/2 years and a couple
of trans axles
the car was origionally built for the Knox Mountain Hill climb
in Kelowna BC but I ended up giving it a paint job and a
sound system...funny as hell a 1985 4 door hatchback that would
keep up to almost anything:D

I would almost get into scraps at red lights with guys in camaro's
and such saying stupid **** like
"If my clutch wasn't slipping I would have kicked your ***"
after pulling 3 gears of good rubberhttp://www.caraudio.com/forum/images/smilies/rotflol.gif

I would make fun of their gas guzzling big *** engine and peel away giving them
a honk with the pathetic sounding horn
had kind of a road runner beep beep sound to it...LOL

Th3pWn3r
03-18-2008, 04:42 PM
I'm wondering wtf "naws" or "nawz "is. I've heard of NOS or Nitrous Oxide but never the others...anyhow, as long as your engine is properly tuned and isn't seeing detonation and such you'll be fine but the rings are going to take a beating but like you said you can always rebuild it. I personally wouldn't dump the kind of money you have into trying to make that car fast but if it's what you have I guess why not? Too late to go back now so you might as well have fun with it haha.

Towncar
03-18-2008, 09:59 PM
looks sweet but that thing has alot of miles on it be careful beating it or it wont last long

Im not worried about it, grandma and her dog owned the car before me, so it runs brand new. Have seen people running nitrous with this car with 200k on the odometer. Plus the engine will be rebuilt anyways.

Towncar
03-18-2008, 10:02 PM
I'm wondering wtf "naws" or "nawz "is. I've heard of NOS or Nitrous Oxide but never the others...anyhow, as long as your engine is properly tuned and isn't seeing detonation and such you'll be fine but the rings are going to take a beating but like you said you can always rebuild it. I personally wouldn't dump the kind of money you have into trying to make that car fast but if it's what you have I guess why not? Too late to go back now so you might as well have fun with it haha.

To each his own. Plenty of vics running 10s 11s, and 12s. Im obviously not in the 12 range yet, but will be with some more modifications, and tunning.

Towncar
03-18-2008, 10:41 PM
New vid, nothing fancy though. Will hopefully have some racing vids up soon.

http://i210.photobucket.com/albums/bb199/mycrownvic01/th_MOV00194.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=MOV00194.flv)

jnralp00
03-18-2008, 10:53 PM
looks fun

king ranch
03-18-2008, 10:55 PM
wat kind of car is this

hoss
03-18-2008, 10:58 PM
wat kind of car is this

its a winnebago.

king ranch
03-18-2008, 10:58 PM
seriosuly

hoss
03-18-2008, 11:00 PM
seriously?

read the thread idiot... its been said what kind of car... we are not here to do your research :fyi:

Ken448
03-18-2008, 11:07 PM
fun, but expensive power.. (initial investment is low) but filling the bottle and repairing the top end when you have a nitrous backfire can get costly :)

hoss
03-18-2008, 11:09 PM
fun, but expensive power.. (initial investment is low) but filling the bottle and repairing the top end when you have a nitrous backfire can get costly :)

or replacing the car when a fitting comes loose and your car goes up in flames :crazy:

Towncar
03-18-2008, 11:22 PM
Its not like im always going to be shooting it. More of a weekend type of thing. So im not to concerned with filling the bottle.

Ken448
03-18-2008, 11:24 PM
even when applied correctly, bad stuff can happen, and on the street with others around is risking too much

king ranch
03-18-2008, 11:38 PM
wow that thing is slow i would leave that car

mr_imperial
03-19-2008, 12:02 AM
wow that thing is slow i would leave that car

i dont see why people post this sort of stuff. He doesn't care if you can beat him whopteedo want a prize? im sure he is doing this build for himself not someone over a forum he hasnt even met... to the op keep it up and don't pay attention to post like this one that the person has to make themselves feel better on(even though im sure you don't). ok thats all:D

hoss
03-19-2008, 12:11 AM
i dont see why people post this sort of stuff. He doesn't care if you can beat him whopteedo want a prize? im sure he is doing this build for himself not someone over a forum he hasnt even met... to the op keep it up and don't pay attention to post like this one that the person has to make themselves feel better on(even though im sure you don't). ok thats all:D

dont worry, i am HIGHLY doubtful that an F150 would beat a panther platform even without the nitrous...

king ranch
03-19-2008, 12:55 AM
ummm do u wanna lay money on that bet or pink slip either way doesnt bother me i highly dobut it will outrun mine considering mine isnt stock by the way just let u kno

BASSMEKANIK
03-19-2008, 01:46 AM
it still just looks way to slow man... i give ya props for trying to make that big *** boat go...

Alpine CDA-9815
03-19-2008, 01:59 AM
Why? Leave the poor car be! :suicide:

Nitrous should look something more like this... and even my car is slow :crying:

http://www.youtube.com/watch?v=6cxhCqd2Rec

Max_Power
03-19-2008, 02:03 AM
Im pretty sure plastic intakes don't like nitrous very much. other than that it doesnt look that bad.

remember to change your oil more frequently, and listen for strange noises....

Nova76
03-19-2008, 02:05 AM
i wouldnt suggest braging about a crown vic my homies got one and i smach on him i know his is stock but even his brothers honda cant even keep up with me and the hondas way way lighter than both of our cars but it might be able to keep up maybe a car or 2 behind with the 100 shot :laugh: but like i say only real men run all motor

Alpine CDA-9815
03-19-2008, 02:20 AM
Im pretty sure plastic intakes don't like nitrous very much. other than that it doesnt look that bad.

remember to change your oil more frequently, and listen for strange noises....
Plastic intakes do just fine with nitrous...

Nova76
03-19-2008, 02:22 AM
hey Alpine CDA-9815 like da set up in your trunk nice amps and sub like the way u painted the intake and covers looks good are you turning it into a show car

Max_Power
03-19-2008, 02:23 AM
Plastic intakes do just fine with nitrous...

news to me, I was always told it was a nono :crap:


- to the OP:

how much was it to get your exhaust done? I have a 1993 lx thats just beggin for some volume....

where did you get your H pipe and throttle body stuff?

mazzasec
03-19-2008, 02:30 AM
watch for them cops man trust me you dont wanna get caught going that fast

Ignatowski
03-19-2008, 07:41 AM
how are you obtaining the proper 950PSI bottle pressure?

hoss
03-19-2008, 07:44 AM
ummm do u wanna lay money on that bet or pink slip either way doesnt bother me i highly dobut it will outrun mine considering mine isnt stock by the way just let u kno

:laugh:

i would definitly lay a pink slip against your f150...

but yes, i am positive that a stock f150 with a 5.4l would not beat a crown vic with a 4.6l...

Towncar
03-19-2008, 11:51 AM
how are you obtaining the proper 950PSI bottle pressure?

I have a bottle warmer, which keeps the pressure perfect. I guess the spedometer looks decieving, because its definately pretty quick. Unfortunately I was unable to race my budy last night. I did hower run into a prelude, not sure what mods it had, but I pulled about 6 cars on him twice. From a 40 roll, and from a dig. Unfortunately my passenger didnt know how to use my camera to record:crap:

Towncar
03-19-2008, 12:29 PM
http://i210.photobucket.com/albums/bb199/mycrownvic01/th_MOV00200.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=MOV00200.flv)

jeeper07
03-19-2008, 12:35 PM
need to get some new rims on that bad boy. and im still waitin to see that new grille.

bigbangtheory
03-22-2008, 01:02 PM
it still just looks way to slow man... i give ya props for trying to make that big *** boat go...

Yep, not gonna lie the speedo isn't going to fast. I know it is a big car and all, but was expecting much more.

I had 100shot of NOS in my cavalier and from 50 to a 100 it flew. I wish I would have taken a vid of that. Much lighter car, with other mods as well. Still............

My Focus I have now, which is all motor with about 2g's in mods would keep up with your car.

You have spent some chedded on this stuff, so I hope you are going to do something else with this.


Is a nice car though. Always wanted a Maruarder or however you spell it.

Towncar
04-03-2008, 10:29 PM
Yep, not gonna lie the speedo isn't going to fast. I know it is a big car and all, but was expecting much more.

I had 100shot of NOS in my cavalier and from 50 to a 100 it flew. I wish I would have taken a vid of that. Much lighter car, with other mods as well. Still............

My Focus I have now, which is all motor with about 2g's in mods would keep up with your car.

You have spent some chedded on this stuff, so I hope you are going to do something else with this.


Is a nice car though. Always wanted a Maruarder or however you spell it.

I dont know about that cavalier taking me out, but ok.. I guarantee that my vic will run stride for stride with a marauder without nitrous. Im running 0-60 in 7 seconds on the street, and high 6s on the track with better traction. Right now the car has the stock tune, which is killing it a bit. I plan on getting it dynotuned very shortly, along with a new high performance torque converter, and a valve body to help it shift faster, and 373 gears. I hope to have it running low 14s in the quartermile n/a, and mid 12s in the quartermile on spray.

http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00246.jpg

Towncar
04-03-2008, 10:30 PM
0-100 n/a May not look that impressive, but considering it ran 8+ stock to 60, and is now under 7, its decent. Does better when rolling though, thats why I have many other mods coming to help get her going. I dont think the spedo vids do it justice though. I will try to get some better vids up soon.

http://i210.photobucket.com/albums/bb199/mycrownvic01/th_MOV00274.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=MOV00274.flv)

60-100

http://i210.photobucket.com/albums/bb199/mycrownvic01/th_MOV00275.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=MOV00275.flv)

king ranch
04-03-2008, 10:36 PM
about 18 seconds from 0-100 it looked like my f-150 2001 5.4l will do 0-90 in 16 seconds and thats my 1/4mile times and 7.8 seconds in 0-60 and thats only with a CAI and my edge on level 2 if i bump it up to level 3 and put 93 octane i will run right around 16.2 in 1/4mile and around 7.5 in 0-60 thats what i got lastime when i had it on level 3

considering how heavy my truck is is pretty good its a supercrew at that with only 3.55 gears

Towncar
04-03-2008, 10:38 PM
I havent got any set quarter mile times, but I will post it up when I have it. I guarantee I will beat 16.2 though. It does that stock.

hoss
04-04-2008, 07:52 AM
about 18 seconds from 0-100 it looked like my f-150 2001 5.4l will do 0-90 in 16 seconds and thats my 1/4mile times and 7.8 seconds in 0-60 and thats only with a CAI and my edge on level 2 if i bump it up to level 3 and put 93 octane i will run right around 16.2 in 1/4mile and around 7.5 in 0-60 thats what i got lastime when i had it on level 3

considering how heavy my truck is is pretty good its a supercrew at that with only 3.55 gears

:laugh::laugh::laugh::hilariou:

and you wanted to race me for pinks... i would love to take your truck :crazy:

Towncar
04-04-2008, 11:01 AM
Also take note that When I did that run it was on the street, partially going up hill, with all the windows down. I will kill a 16.2 quartermile.

JLa Obsessed
04-04-2008, 08:08 PM
everytime i see vids of your crown vic i cant help but to think of that awful movie taxi lol

Towncar
04-06-2008, 10:32 PM
Here is a vid of me toying with an 01 accord v6. Not exactly the best vehicle to race against, but hey its a vid..

http://i210.photobucket.com/albums/bb199/mycrownvic01/th_MOV00279.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=MOV00279.flv)

jeeper07
04-08-2008, 02:57 AM
haha. "ill give you a head start".

SilverSquared
04-08-2008, 04:13 AM
Pull that cheap intake off and polish the insides. Looked pretty rough. I'm assuming your car tops at 100 because thats ALL you get up to.


1st thing you SHOULD have done for speed. WEIGHT REDUCTION.


Dont expect to get in the 12s cheap. You have a BRICK. NOT aerodynamic. 16s on spray isnt impressive, neither is 6.8 to 60. Do supporting mods, other than bolt on, and you will see a big difference. I still think its gay to put NOS on any vehicle, ESPECIALLY when you cant build the power.

Towncar
04-08-2008, 04:42 AM
Pull that cheap intake off and polish the insides. Looked pretty rough. I'm assuming your car tops at 100 because thats ALL you get up to.


1st thing you SHOULD have done for speed. WEIGHT REDUCTION.


Dont expect to get in the 12s cheap. You have a BRICK. NOT aerodynamic. 16s on spray isnt impressive, neither is 6.8 to 60. Do supporting mods, other than bolt on, and you will see a big difference. I still think its gay to put NOS on any vehicle, ESPECIALLY when you cant build the power.

The intake is fine, ive done my hw on the mods I have. Secondly, I will get my car in the 12s. My car does 16s bone stock. As for the 6.8 to 60, its pretty impressive for the minor boltons that I have done, the fact im going up a slight incline with all windowns down, the weight of the car, running without nitrous, and not to mention my car only has 235 hp stock and considering its a second faster to 60 than it was when stock. My car runs 13s comfortably on spray right now. It will be in the 12s when im done. I have tons and tons of mods left to do, but hey its a start. And if you dont like nos, thats your opinion. Its not a problem of building the power, its the fact that i would rather use nitrous than a turbo/sc. Its a personal preference thanks..

crunktimes.com
04-08-2008, 04:59 AM
wow what a clusterfuck of a thread :fyi:

Towncar
04-19-2008, 01:55 PM
Huge car show last night, and I was able to atleast get 1 race filmed.. my vic vs 5.0 mustang

Pulled about 3-4 cars on him every race. I did let off the gas at the end.

http://i240.photobucket.com/albums/ff237/fordcrownvictoria02/th_MOV00301.jpg (http://s240.photobucket.com/albums/ff237/fordcrownvictoria02/?action=view&current=MOV00301.flv)

Alpineforever
04-19-2008, 02:24 PM
I'm not knocking your car or anything I personally think it's cool... but i personally just love how whenever any1 says anything bad about anything anyones been working on there is always a string of excuses like "I was driving uphill with the windows open when i filmed that." Why can't people just showcase there stuff at it's best so there are no excuses and your performance is relatively indicative of what your car can actually do... but i think your car is cool and you shouldn't respond when people tell you that you aren't running fast enough...

93 saturn sl2
04-19-2008, 02:53 PM
lol my thread was just like this when I had nitrous on my saturn.

Your going to need more than an 100 shot to stay up with any ls1 f-body though.

Towncar
04-19-2008, 03:14 PM
lol my thread was just like this when I had nitrous on my saturn.

Your going to need more than an 100 shot to stay up with any ls1 f-body though.

I have a 125 shot..Only ran 100 on that vid though, and I have already beat a transam.

Towncar
04-19-2008, 03:16 PM
I'm not knocking your car or anything I personally think it's cool... but i personally just love how whenever any1 says anything bad about anything anyones been working on there is always a string of excuses like "I was driving uphill with the windows open when i filmed that." Why can't people just showcase there stuff at it's best so there are no excuses and your performance is relatively indicative of what your car can actually do... but i think your car is cool and you shouldn't respond when people tell you that you aren't running fast enough...

I could care less weather they think its slow or not, I know what my car is capable of. Its running 13s, soon to be low 12s. Not to bad if you ask me... No excuses..

mlstrass
04-19-2008, 03:23 PM
Cool other then you're going from a roll. Sack up with some $$$, sit on the line and see who's really faster...

93 saturn sl2
04-19-2008, 03:34 PM
I have a 125 shot..Only ran 100 on that vid though, and I have already beat a transam.

Is there a video of it? I want to see.

Alpine CDA-9815
04-19-2008, 04:20 PM
I have a 125 shot..Only ran 100 on that vid though, and I have already beat a transam.
A LT1? :D

93 saturn sl2
04-19-2008, 05:09 PM
A LT1? :D

Thats exactly what Im thinking...lawl

elmor001
04-20-2008, 01:21 AM
I used to have a 2002 crown vic with a marauder front end. It was a very fun car, I loved it. I sold it though and now Im looking for a cobra.

I say give it a ton of nitrous and if you blow your engine, swap in a lightning motor and cut the hood. Check this out
http://www.ls1tech.com/forums/showthread.php?t=761661
you can search for this guy by the name quickcrownvic on google. He's got some videos of it and I think it was in a fast fords magazine a while back. Oh yeah my car was the second one on this page.


Good luck with your build. You've got some good results so far

flipside1212
04-20-2008, 01:26 AM
http://i240.photobucket.com/albums/ff237/fordcrownvictoria02/lawnmower.jpg

really? wtf

Towncar
04-20-2008, 01:50 AM
A LT1? :D

Yep, but its an lt1 with custom cut out exhausts, and a cam. He can probably beat me out of the hole, as I havent got my 373 gears yet, and my valvebody, and my torque converter, but I pulled half a car on him from a roll. So yes, I can run with stock ls1s, or an ls1 with minor things. Ive got some serious work about to go into my motor though, cams, heads, new intake manifold, ect. :crazy:

Towncar
04-20-2008, 01:51 AM
http://i240.photobucket.com/albums/ff237/fordcrownvictoria02/lawnmower.jpg

really? wtf

It was a joke..

Towncar
04-20-2008, 01:53 AM
I used to have a 2002 crown vic with a marauder front end. It was a very fun car, I loved it. I sold it though and now Im looking for a cobra.

I say give it a ton of nitrous and if you blow your engine, swap in a lightning motor and cut the hood. Check this out
http://www.ls1tech.com/forums/showthread.php?t=761661
you can search for this guy by the name quickcrownvic on google. He's got some videos of it and I think it was in a fast fords magazine a while back. Oh yeah my car was the second one on this page.


Good luck with your build. You've got some good results so far


My car is tuned to handle the nitrous.. As for the motor swap, I would have to modify the hood to make the lightning motor fit, but it is a nice engine. For now, Im going to use my stock motor, and just proabably rebuild it later on in the year. I dont want to do any mods to the hood to make the motor fit, which is one reason why i wont go with the 5.4 motor. I want my car to look bone stock on the outside. :)

93 saturn sl2
04-20-2008, 02:26 AM
I can run with stock ls1s, or an ls1 with minor things. Ive got some serious work about to go into my motor though, cams, heads, new intake manifold, ect. :crazy:

Im sorry, but the only way you would is if the driver couldnt drive.


Now when you rebuild throw a 5.4 in it. Doesnt have to be the lightning engine. Any 2v 5.4 from a 5-150, etc will bolt right in. There was a guy with a 5.4 in his GT on corral.net all stock engine with a 75 shot on it and he made like 360whp and 470tq. All you need to do is get IM adapters so you can run a 4.6 intake. I'd check out the HPS hardball'r intake btw. My friends got one on his 99 GT and its bulletproof lol.

Towncar
04-20-2008, 02:48 AM
Nope, He can drive just fine.. My budy russ that has the same car, and it runs 12.7s with his 125 shot. Beating out ls1s, evos, ect daily. Its all about how you have the car setup. I will try to race him again, and post it up. The race can really go either way. We only raced once, like a few days after he got his cam in.

Towncar
04-20-2008, 02:51 AM
I havent had my car dynoed yet, but my budys car did 366 hp to the wheels with similar mods that I have with the nitrous, and 460 pounds of torque with the 4.6. The 5.4 isnt that much more powerful, you are almost better off rebuilding the 4.6, which is what he is currently doing as we speak.

Nova76
04-20-2008, 02:57 AM
Eh, really cant go by the vid much. all windows down, ect.. We will see how I fair against the ss. Either way, Ive got plenty of more juice. 100 shot goes on later this week. yes the fuel pump, lines, spark plugs, and ect have been upgraded.

my nova does like 6 secs from 50 to 120 i made the needle go away so fast my gauge broke your **** is weak son :fyi:

and for putting nos in a old cop car and thinking your fast :slap:

Towncar
04-20-2008, 02:59 AM
my nova does liek 6 secs from 50 to 120 i made the needle go away so fast my gauge broke your **** is weak son :fyi:

and for putting nos in a old cop car and thinking your fast :slap:

Congrats, but I simply dont care what you think;) It wasnt a cop car, its an lx. thanks

Nova76
04-20-2008, 03:04 AM
Congrats, but I simply dont care what you think;) It wasnt a cop car, its an lx. thanks

oh wow i guess you just know everything except that crown vics are used as UCs cars:rolleyes:, and i really dont care if you dont care just letting you know whats really good

Towncar
04-20-2008, 03:06 AM
oh wow i guess you just know everything except that crown vics are used as UCs cars:rolleyes, and i really dont care if you dont care just letting you know whats really good

Ok, and im just letting you know I dont care.. ;)

Alpine CDA-9815
04-20-2008, 03:16 AM
Yep, but its an lt1 with custom cut out exhausts, and a cam. He can probably beat me out of the hole, as I havent got my 373 gears yet, and my valvebody, and my torque converter, but I pulled half a car on him from a roll. So yes, I can run with stock ls1s, or an ls1 with minor things. Ive got some serious work about to go into my motor though, cams, heads, new intake manifold, ect. :crazy:
Cam + cut outs are not going to do a whole lot. Especially if he went with something like the GM Hot Cam. Gears probably gave him the biggest gain. Even still I would think that car would mabe run mid to high 13's. Not that fast...

Also if you pulled up on a LS1 and the driver actually knew what he/she was doing, I highly doubt you would win.

Have fun.

bds0688
04-20-2008, 03:30 AM
oh wow i guess you just know everything except that crown vics are used as UCs cars:rolleyes:, and i really dont care if you dont care just letting you know whats really good

His Crown Vic looks a **** ton better than your Nova. :fyi:

Nova76
04-20-2008, 03:34 AM
His Crown Vic looks a **** ton better than your Nova. :fyi:

thats an old pic of her, iv done alot of stuff to her just havnt uploaded a new pic of her and im sure id smash on his vic just like i smashed on my homies vic and pretty much all the fords iv come up against

Towncar
04-20-2008, 03:35 AM
Cam + cut outs are not going to do a whole lot. Especially if he went with something like the GM Hot Cam. Gears probably gave him the biggest gain. Even still I would think that car would mabe run mid to high 13's. Not that fast...

Also if you pulled up on a LS1 and the driver actually knew what he/she was doing, I highly doubt you would win.

Have fun.

He went with a very high performance cam. I will have to call him and find out which one he went with. I guess everyone seems to think the ls1 is untouchable. Ive seen my budy in his 01 pi with the stock motor, and many mods beat a bolt on ss off the line twice, and the ls1 couldnt catch him. From a roll he still won, but barely. pretty much dead even. Im shooting for about 12.5 or so prior to rebuilding the engine. I will keep vids posted though. Im not saying my vic can beat an ss, but I think it would be an ok race from a roll atleast.

Towncar
04-20-2008, 03:38 AM
thats an old pic of her, iv done alot of stuff to her just havnt uploaded a new pic of her and im sure id smash on his vic just like i smashed on my homies vic and pretty much all the fords iv come up against

Thats great, im sure your car is faster, but who cares, their is always someone out there faster. This isnt a race car, this is my family car. btw their are plenty of fast vics out there that will kill your nova. So once again, back to the subject..

Nova76
04-20-2008, 03:43 AM
Thats great, im sure your car is faster, but who cares, their is always someone out there faster. This isnt a race car, this is my family car. btw their are plenty of fast vics out there that will kill your nova. So once again, back to the subject..

hahaha i know and iv been beat a couple times its all good i love comp because when i got the car it was a peice of **** and i rebuilt her and now everyone that was laughing is likin her and for you not wanting it to be a race car it sure seems like your trying to pass it off as one, and mine isnt one either if it was id have a 383, roll cage, fuel cell, stick, posi unit in the rear, and i wouldnt be putting a system in it but its my daily driver.
but oh well iv made my point no reason trying to argue anymore with someone that owns a ford there never going to like a chevy and vise versa.

Towncar
04-20-2008, 03:45 AM
Nope, im not tryn to pass it off as a race car, maybe someday when the motor is rebuilt, and ect. I have way to many mods left.

savagebee
04-20-2008, 03:47 AM
oh wow i guess you just know everything except that crown vics are used as UCs cars:rolleyes:, and i really dont care if you dont care just letting you know whats really good

no one cares

Towncar
04-20-2008, 03:48 AM
Now this is a beast of a vic. This guy can now run into the 10s. They are the perfect sleeper cars :)

http://www.youtube.com/watch?v=6P8c3UZZ8nk

savagebee
04-20-2008, 03:50 AM
hahaha i know and iv been beat a couple times its all good i love comp because when i got the car it was a peice of **** and i rebuilt her and now everyone that was laughing is likin her and for you not wanting it to be a race car it sure seems like your trying to pass it off as one, and mine isnt one either if it was id have a 383, roll cage, fuel cell, stick, posi unit in the rear, and i wouldnt be putting a system in it but its my daily driver.
but oh well iv made my point no reason trying to argue anymore with someone that owns a ford there never going to like a chevy and vise versa.

punctuation is your friend :fyi:

Alpine CDA-9815
04-20-2008, 03:51 AM
He went with a very high performance cam. I will have to call him and find out which one he went with. I guess everyone seems to think the ls1 is untouchable. Ive seen my budy in his 01 pi with the stock motor, and many mods beat a bolt on ss off the line twice, and the ls1 couldnt catch him. From a roll he still won, but barely. pretty much dead even. Im shooting for about 12.5 or so prior to rebuilding the engine. I will keep vids posted though. Im not saying my vic can beat an ss, but I think it would be an ok race from a roll atleast.
Never said they were untouchable. I'm just saying I know what they are capable of with a good driver behind the wheel and if got to race one with a good driver that I doubt you would win... stock or slighly modded.

Don't take it personally, I'm just stating my opinion.

bds0688
04-20-2008, 03:52 AM
Edit: Just saw Alpine's post. See yor point now. I recant my statements.

Nova76
04-20-2008, 03:53 AM
punctuation is your friend :fyi:

*** punctuation

savagebee
04-20-2008, 03:53 AM
I see a lot of armchair racing here. Stats and naming parts is only so good. *shrug* At least the guy's doing something slightly out of the norm. It may not be the fastest, and he talks it up, but who doesn't talk up their car they put work into?

exactly
i would of went a different route, but hell, different strokes
Its always nice to see someone playing with something besides an f body or fox body

bds0688
04-20-2008, 03:57 AM
That is a ****** Vic.

Towncar
04-20-2008, 03:57 AM
Thats it.. Im sick of seeing camaros, and transams, and mustangs.. This car was just ment for the fam, but I ended up going for more speed, and so far its about 3 seconds faster than it was stock on the quarter.. I like being different, thats why its always nice seeing the looks on peoples faces, when they hear a loud v8 coming by, and its a crownvic :) priceless

bds0688
04-20-2008, 04:01 AM
Thats it.. Im sick of seeing camaros, and transams, and mustangs.. This car was just ment for the fam, but I ended up going for more speed, and so far its about 3 seconds faster than it was stock on the quarter.. I like being different, thats why its always nice seeing the looks on peoples faces, when they hear a loud v8 coming by, and its a crownvic :) priceless

In a sense, your car is a true modern day muscle car. Big family car with a tuned engine. Years from now, assuming performance cars are allowed, I do not doubt seeing CrownVics/Marauders in the same league as Caprices/Impalas, the pony cars, etc.

Alpine CDA-9815
04-20-2008, 04:03 AM
Thats it.. Im sick of seeing camaros, and transams, and mustangs.. This car was just ment for the fam, but I ended up going for more speed, and so far its about 3 seconds faster than it was stock on the quarter.. I like being different, thats why its always nice seeing the looks on peoples faces, when they hear a loud v8 coming by, and its a crownvic :) priceless
That's why I drive a Pontac Grand Am/Grand Prix/G6 or whatever you wanna call it with the V8 mod ;).

So have you ever taken the car to the track and ran it?

savagebee
04-20-2008, 04:07 AM
That's why I drive a Pontac Grand Am/Grand Prix/G6 or whatever you wanna call it with the V8 mod ;).

So have you ever taken the car to the track and ran it?

this is why I love the new goats

everyone talks about how they look like a family car, thats a bonus for me

Towncar
04-20-2008, 04:08 AM
Yep, the best I could get it to do was a 13.7, and that was with the 100 shot. I dont plan on going back until I get my torque converter, valvebody, dynotune, 373 gears, with a new driveshaft, and a few more things.. That tc, and the gears should help me a ton, as my car lacks getting off the line.

Towncar
04-20-2008, 04:11 AM
Here is the tc, and valvebody I have coming in very shortly.

http://www.blueovalchips.com/index.php?action=item&id=70&prevaction=category&previd=14&prevstart=0

http://www.blueovalchips.com/index.php?action=item&id=72&prevaction=category&previd=4&prevstart=0

gl0ck
04-20-2008, 12:20 PM
im prob. late in this thread but did anyone ask why you are doing this? Just to be cool or do you actually have a goal? My car with a 100 dry shot, acts quite differently but it needs a good tune.

elmor001
04-20-2008, 12:33 PM
......
but oh well iv made my point no reason trying to argue anymore with someone that owns a ford there never going to like a chevy and vise versa.

why does everyone think this? If it's fast and looks good, I'll like it. I don't care what the emblem says

Towncar
04-20-2008, 01:43 PM
im prob. late in this thread but did anyone ask why you are doing this? Just to be cool or do you actually have a goal? My car with a 100 dry shot, acts quite differently but it needs a good tune.

Yes, my goal is mid 12s when im done with my daily. Im sure once that is accomplished, I will want more, but its a start..

gl0ck
04-20-2008, 02:26 PM
Yes, my goal is mid 12s when im done with my daily. Im sure once that is accomplished, I will want more, but its a start..

Well good luck my friend it will be an accomplishment to say the least, BTW Alpine dude i like your GTO what tires are those?

DownSouth954
04-20-2008, 02:38 PM
Major props on the vic and impressive times! Me and my buddies all have panther bodies and love 'em to death. There's also a guy down here in Miami running 10's in his Grand Marquis I see him at the track every now and then.

xhilr8n
04-20-2008, 02:43 PM
you should put tha nitrous on a micro-switch that way it will only come on when your all tha way to tha floor and just put an arm switch on it...

i think you mean a WOT switch.

xhilr8n
04-20-2008, 02:45 PM
i see no plans for FI.

without that and/or rebuilding the motor, all your efforts will be in vain in that car... still though, id be interested to see how your ET's improve or your 0-60's with each jet :)


why would he need plans for fuel injection when it is already fuel injected. If he has already upgraded the fuel pump and changed plugs that will be sufficient for now, much more than what you have you need to get some larger fuel injectors, if that is an option on the crown vics...(roughly the same motor as the 96-96 mustang gt's)

Towncar
04-20-2008, 02:57 PM
i think you mean a WOT switch.

Thats exactly what I have. My nitrous only kicks in when I go wot. My kit came with all that. bottle warmer is the very bottom switch. The purge is the top right, and the nitrous arm switch is the top left.


http://i210.photobucket.com/albums/bb199/mycrownvic01/DSC00182.jpg

hoss
04-20-2008, 02:57 PM
why would he need plans for fuel injection when it is already fuel injected. If he has already upgraded the fuel pump and changed plugs that will be sufficient for now, much more than what you have you need to get some larger fuel injectors, if that is an option on the crown vics...(roughly the same motor as the 96-96 mustang gt's)
you dont spend alot of time around cars, do you ;)

xhilr8n
04-20-2008, 02:57 PM
I could care less weather they think its slow or not, I know what my car is capable of. Its running 13s, soon to be low 12s. Not to bad if you ask me... No excuses..

Your car isn't running 13's man, you have no way of knowing that when you have already said in this thread that you haven't taken it to the track. I would say very very low 14's, and before it is said, i'm not hating or whatever. I like the way the car sounds, and seems to run strong for what it is. Props for being different, but you got a long way to go for 12's man. i have had many drag/street cars/trucks that i have raced. the track and low et's are a lot harder than just bolt ons. You will need better suspension better tires, a tranny to hold more power/weight, probably a stall would be really beneficial, and some 4:10 to 4:30 gears in the rear of that car would make a large difference b/c they would ge that weight moving.



Once again Props btw.


Jason

xhilr8n
04-20-2008, 02:58 PM
you dont spend alot of time around cars, do you ;)

are you serious. What do you/have you owned? That car is already fuel injected, or can you not see that?

hoss
04-20-2008, 03:00 PM
what i have is irrelevant to the conversation. what is relevant to the conversation is the fact that FI does not = fuel injection.

Towncar
04-20-2008, 03:01 PM
Your car isn't running 13's man, you have no way of knowing that when you have already said in this thread that you haven't taken it to the track. I would say very very low 14's, and before it is said, i'm not hating or whatever. I like the way the car sounds, and seems to run strong for what it is. Props for being different, but you got a long way to go for 12's man. i have had many drag/street cars/trucks that i have raced. the track and low et's are a lot harder than just bolt ons. You will need better suspension better tires, a tranny to hold more power/weight, probably a stall would be really beneficial, and some 4:10 to 4"30 gears in the rear of that car would make a large difference b/c they would ge that weight moving.



Once again Props btw.


Jason

I went this past weekend... fyi I will see if I can find the time slip, and scan it. My tires run great for what they are, but I will have some mt streets for the drag strip.. I will be running 373 gears, anything larger is rediculous for the highway usage.. The suspension is fine for now, and I have a stall coming in, along with trans work. They are being built as we speak. Also the upgraded drive shaft aswell.

Towncar
04-20-2008, 03:06 PM
Im hoping to run low 14s without nitrous when its all said and done.. Their is one guy running 14.2 without nitrous, only bolt ons, and no weight reduction either.. Pretty impressive..

xhilr8n
04-20-2008, 03:13 PM
what i have is irrelevant to the conversation. what is relevant to the conversation is the fact that FI does not = fuel injection.


So you are stating that nitrous is not a means of forced induction? No kidding, but he had already stated that his plans were just the nitrous.

You still haven't said what you have had etc., other than being an internet warrior that warrants or validates all this so called experience you have with cars.


jason

xhilr8n
04-20-2008, 03:15 PM
Im hoping to run low 14s without nitrous when its all said and done.. Their is one guy running 14.2 without nitrous, only bolt ons, and no weight reduction either.. Pretty impressive..

If so that really good. Before i made the post about the gears etc., i hadn't read all the pages, guess i shoulda done that first.....lol

I would put more than 3.73's in that heavy car with an automatic. There is a device you can use to adjust your speedo on that car if i am not mistaken.


BTW>.....the turbo crown vic that you posted was a sick car........when the marauder first come out they had one with a kenne bell blowzilla on it at fun ford weekend, it outran me at the track (inspired me to do more work to my past mustang)

Towncar
04-20-2008, 03:20 PM
Yes, I will need a speedo gear to make the adjust ments.. Still, 3.73s are good for these cars.. This car isnt as heavy as some may think. yes 3900 pounds is decently heavy, but look at pretty much all the older cars, and alot of the newer cars, they all weigh a ton. challenger, charger, 300c, 350z, ect.

Alpine CDA-9815
04-20-2008, 05:24 PM
Well good luck my friend it will be an accomplishment to say the least, BTW Alpine dude i like your GTO what tires are those?
Thanks, Goodyear Eagle F1 GS-D3's.


Yes, I will need a speedo gear to make the adjust ments.. Still, 3.73s are good for these cars.. This car isnt as heavy as some may think. yes 3900 pounds is decently heavy, but look at pretty much all the older cars, and alot of the newer cars, they all weigh a ton. challenger, charger, 300c, 350z, ect.
If the car is a DD, I wouldn't do anything bigger than 3.73's in an auto IMO.

Towncar
04-20-2008, 09:49 PM
Thanks, Goodyear Eagle F1 GS-D3's.


If the car is a DD, I wouldn't do anything bigger than 3.73's in an auto IMO.

Yea, that was the plan originally, I even said repetedly im not going any bigger than 373:crazy:

xhilr8n
04-20-2008, 10:48 PM
what is the weight on that thing anyhow?

Don't fear the Gear......well unless you do a lot of highway driving..... I am from a small town so i only have a 10 mile commute across town etc.


jason

Towncar
04-21-2008, 03:05 AM
The car is 3900lbs. And Yes I do mainly highway driving, so I didnt want to do to high of a gear..

savagebee
04-21-2008, 03:58 AM
are you serious. What do you/have you owned? That car is already fuel injected, or can you not see that?

Im sure he's referring to a second power adder

xhilr8n
04-21-2008, 04:10 AM
Im sure he's referring to a second power adder

what did you change your post for, or did you figure out i had already stated what he was implying on the previous page Jacka$$

savagebee
04-21-2008, 04:33 AM
what did you change your post for, or did you figure out i had already stated what he was implying on the previous page Jacka$$

:crying:
it was a misunderstanding

xhilr8n
04-21-2008, 02:46 PM
lmao.....sorry about being pissy yesterday........keep us updated with the car man....don't worry about what anyone telling you don't do has to say.



jason

Towncar
04-24-2008, 03:15 AM
Update: I am in the process of gathering parts right now, but Im planning on having the motor rebuilt. Heads, cams, ect.. Im hoping for 300+ to the wheels n/a

93 saturn sl2
04-25-2008, 12:52 AM
Update: I am in the process of gathering parts right now, but Im planning on having the motor rebuilt. Heads, cams, ect.. Im hoping for 300+ to the wheels n/a

What are you going to use for tuning?

I dont know what trans that car has, but if its the 4R70W Id suggest doing the j-mod to it.

jerry mod (http://www.tccoa.com/articles/tranny/index.html#)

jsapp720
04-25-2008, 12:56 AM
my buddy's talon with no NOS will burn your **** alive

Towncar
04-25-2008, 01:07 AM
What are you going to use for tuning?

I dont know what trans that car has, but if its the 4R70W Id suggest doing the j-mod to it.

jerry mod (http://www.tccoa.com/articles/tranny/index.html#)

I will be getting the a rebuilt trans. As for the jmod, i wont be getting that, instead, i will be getting a similar product called the valvebody from blue oval chips. It does the same thing the jmod does, only its built to every specification of the car. As for tuning goes, everything is dynotuned..

http://www.blueovalchips.com/index.php?action=item&id=72&prevaction=category&previd=4&prevstart=0

Towncar
04-25-2008, 01:08 AM
my buddy's talon with no NOS will burn your **** alive

Congrats, I dont care. YOu drive a stratus.. Thanks bye..

Towncar
04-25-2008, 03:37 AM
Thinking about buying a new motor due to the shops outrageous prices to rebuild my engine with forged internals.. I really want this top motor, but for 10k it is pricey. Although It is already forged, and has 400hp to boot, and would drop in my car with no modifications at all.. Decisions decisions..

http://www.seanhylandmotorsport.com/modular_crate_engines.shtml

thehardknoxlife
04-25-2008, 04:05 AM
Dang dude. That is all.....

thehardknoxlife
04-25-2008, 04:14 AM
If you really wanna build that motor I can put you into contact with someone in Morristown. My uncle works at Molly so I can probably get discounts on the pistons......

Towncar
04-25-2008, 04:19 AM
Dang dude. That is all.....

Thats all? whats that supposed to mean?

thehardknoxlife
04-25-2008, 04:24 AM
Thats all? whats that supposed to mean?It means your car is a slow boat :D. J/King I never knew your were into drag racing, I've never seen you at the track.

Towncar
04-25-2008, 04:29 AM
Well thats because my car is really not track worthy. High 13s isnt anything to brag about, but ive certainly surpised a few cars with my vic, with the minor mods ive done.. Before I get gears, and do more trans work, Ide like to have more power to work with n/a. That is why ive got my eye heavily on that 10k engine haha. 7500 for my engine rebuilt/ forged is rediculous. For 3k more, I could have a 400hp n/a engine, with forged internals.. Then I could run a 300 shot of nitrous or whatever.

thehardknoxlife
04-25-2008, 04:45 AM
Maybe I'll see you there this year. I usually go to Knoxville Drag, but since I parted my car out I probably won't be there as much this year. There are no 1/4 mile tracks around here sadly.

Towncar
04-25-2008, 04:49 AM
Yep, which is why ive only been once while I was out of town to a track.

thehardknoxlife
04-25-2008, 04:50 AM
Yep, I think the closest is johnson city or something like that..

Nope, Bristol...and it's concrete not asphalt. The only other one in TN is in Memphis.

Towncar
04-25-2008, 04:52 AM
Nope, Bristol...and it's concrete not asphalt. The only other one in TN is in Memphis.

i edited my post prior to you posting, but either way, I was forced to make a run at the track when I was out of town..

93 saturn sl2
04-25-2008, 11:22 AM
Just get a forged shortblock and put the heads/cams of your choice in it.

http://modularpowerhouse.com/

xhilr8n
04-25-2008, 11:51 AM
now your talking.......i would suggest running a mustang setup on the motor, and then just swap ecu's. and harness'. That would allow you to tune very easily.


jason

B_Campbell
04-25-2008, 04:50 PM
**** its almost as fast as a caprice now


i kid i kid

Towncar
04-26-2008, 01:19 AM
**** its almost as fast as a caprice now


i kid i kid

haha My car runs head up with both a marauder, and a 96ss without nitrous. Ran into a marauder last weekend.. :)

SilverSquared
04-26-2008, 01:36 AM
if ya ever come to La, i'll run ya at the track. B2200 single cab, air bagged, big wheels, and a sub box that takes up half the bed with 4-12s. I wont have nearly the hp...but you wont embarrass me.

bigbangtheory
04-26-2008, 12:02 PM
Have you gotten your timeslip yet? I just don't see that car being 13.7's even with the shot and I am basing that off your videos. Mine is 14.2 and from 60-100 mine looks like it goes faster and tha is with out NOS. So I am not sure I believe you, but video's are not always accurate.

Towncar
04-27-2008, 05:31 PM
Just get a forged shortblock and put the heads/cams of your choice in it.

http://modularpowerhouse.com/


That site is a rip off.

xhilr8n
04-27-2008, 08:12 PM
why are they a rip-off?


They are known for kicking out quality short blocks etc. for the modular powered cars, and have a lot of proof of their work. If you mean expensive, you get what you pay for

smd4life
04-27-2008, 08:22 PM
Have you gotten your timeslip yet? I just don't see that car being 13.7's even with the shot and I am basing that off your videos. Mine is 14.2 and from 60-100 mine looks like it goes faster and tha is with out NOS. So I am not sure I believe you, but video's are not always accurate.

once again....a pointless post by biggaytheory

Towncar
04-27-2008, 10:12 PM
Ok, pricey sounds better.. Im going to look around more for some options.

DeViOuSoNe
04-27-2008, 10:21 PM
Town car do you have AIM? I have a BUNCH of mod motor stuff.

93 saturn sl2
04-28-2008, 10:55 AM
That site is a rip off.

rip off?? Paying 10k for an engine that only makes 400 flywheel HP is a rip off. I dont care who built it.

Eugenics
04-28-2008, 12:39 PM
my grandma's scooter does better runs then that thing.

DownSouth954
04-28-2008, 03:38 PM
my grandma's scooter does better runs then that thing.

Yeah, well your grandma's scooter doesn't sit five comfortably while cruising the highway :cool:

MEMPHISFLEX
04-28-2008, 03:44 PM
If he claims that car does 13.7 then i would pay to see it, because my 2003 supercharged mustang gt was only running low to mid 13s and that was a 5spd, with exhaust, hypertech programmer, cold air intake kit, and BBK throttle body, i couldnt hook up worth a ****, but still that town car is not going to run with a stock LS1 which they run mid 13s and not going to beat a stock LT1 which they run low to mid 14s, nitrous or no nitrous, hes stock for the most part, and depending on the year there either 210-235hp 4.6Ls and they are like 4200lbs with high high rear end gears

Eugenics
04-28-2008, 04:18 PM
Yeah, well your grandma's scooter doesn't sit five comfortably while cruising the highway :cool:

my grandmas scooter is a s550 so yes it does.

Towncar
04-29-2008, 01:46 AM
If he claims that car does 13.7 then i would pay to see it, because my 2003 supercharged mustang gt was only running low to mid 13s and that was a 5spd, with exhaust, hypertech programmer, cold air intake kit, and BBK throttle body, i couldnt hook up worth a ****, but still that town car is not going to run with a stock LS1 which they run mid 13s and not going to beat a stock LT1 which they run low to mid 14s, nitrous or no nitrous, hes stock for the most part, and depending on the year there either 210-235hp 4.6Ls and they are like 4200lbs with high high rear end gears

Hmm lets see.. My car is 3900lbs, not 4200. It came stock with 235hp. My mods are much larger tires to hook, 125 shot of nitrous, throttle body, plenum, intake, 2.5inch xpipe no cats, headers, underdrive pulleys, and a tune. Believe it if you want to, but I have beat my friends lt1 several times. We have raced every time from a roll. My budy with an 01 vic has ran 12.7 with all boltons, and 125shot of nitrous. This car can crack 12s with the stock motor, and a power adder, and some bolt ons, ive seen it done to many times. Their is another guy, not local, but he runs 14.2 stock motor, bolt on, and some trans work. btw its a crownvic, not a towncar. Towncars are heavier...

Towncar
04-29-2008, 01:49 AM
rip off?? Paying 10k for an engine that only makes 400 flywheel HP is a rip off. I dont care who built it.

I edited, but by the time you get all the parts, you will be at dam near 10k, and probably wont be at 400hp. That engine is also a direct fit, will replace the stock motor with virtually no mods. I agree its pricey aswell, but for the price they want for a rebuilt forged motor, it doesnt sound pricey at all. :crazy:

Towncar
04-29-2008, 01:50 AM
my grandmas scooter is a s550 so yes it does.

Yea that would be faster.. Ide hope so for the 100+k price tag:D

MEMPHISFLEX
04-29-2008, 02:02 AM
pretty good, i worked for ford for 2 1/2 years as a mechanic and i drove more vics, stangs, and other similar ford cars, new 2006 GT stangs run mid 14s so if your running that quick then thats pretty good, because there was a 500hp vic with a 6-71 blower sticking out the hood this last summer only running 12.7s with slicks, that was tubed, with 4:56 gears, your stock 2:92 or 3:08 rear end gears with maybe 325-340 rwhp car weighing around 4000 lbs is not going to run that quick of times, you dont even have a cold air intake kit, 14 year olds atleast do that to there dodge colts when they get them, i been in the racing game for some time now, with mustangs, 350zs 300ZX TTs, LS1s LT1s vettes everything, buick GNs, my small block 355 roller S-10 was only doing 13.8s with 425hp at the fly wheel, with drag radials, i just dont see your boat of a car doing that good, and that video took for ever just to run from 50-100 high 13s sorry no way, i dont see it, i mean stock C5 vettes run that, some do 13.4-13.5s, i ran the firehawk against a stock 2003 red 6spd C5 he ran a 13.6 @ 102 in the 1/4 and i ran a 13.1 @ 108 in the 1/4 so 13.7s with just a 125 kit, that you most likely are only seeing around 80-95hp gain out of it, and your lil add ons, thats hard to do but ill give ya mad props if you run 13.7s, but you have to have a stall converter, or a line lock, or a tranny brake, because there is no way your going to get that heavy of a car up and moving like that, to run that good of times, and with stock rear end gears that had to do regardless, need at least 3:73s but for that heavy of a car 4:10/11s!

B_Campbell
04-29-2008, 02:07 AM
haha My car runs head up with both a marauder, and a 96ss without nitrous. Ran into a marauder last weekend.. :)


yes, you modded and them stock.

Towncar
04-29-2008, 02:12 AM
The 373 are coming soon, along with another drive shaft. The time was 13.79, but it was windy, so im not going to take full credit of it, but I know it can just go under 14 seconds with my nitrous. Dont judge that video I posted, as I didnt have on the 125 shot. As for tracktion, Iwill get some mt streets drag radials from the local shop, when I get more serious, but my 9.5inch rears hook very well. Running 255 50s on the car, and the tire is actually wider then the rim, but it hooks.. here is a vid of my budy, and his friend. Not their best day at the track, but decent times.. Better than mine atleast. for now :) http://www.youtube.com/watch?v=7lzTflOidX0

Towncar
04-29-2008, 02:15 AM
yes, you modded and them stock.

Yep, my car bolt ons will run with them stock, but to be honest I dont see the marauder/ss being worth it, as its more expensive, for minimal performance upgrade.. a 2004 pi will run heads up with a marauder or ss stock.

B_Campbell
04-29-2008, 02:17 AM
Yep, my car bolt ons will run with them stock, but to be honest I dont see the marauder/ss being worth it, as its more expensive, for minimal performance upgrade.. a 2004 pi will run heads up with a marauder or ss stock.

ok.

Towncar
04-29-2008, 02:18 AM
Dont get me wrong, I like both cars. Just saying..

Towncar
04-29-2008, 02:22 AM
One other I forgot.. Not his, but another http://www.youtube.com/watch?v=Zme3OGFd7OU&feature=user

MEMPHISFLEX
04-29-2008, 02:24 AM
A stock marauder has a 32v cobra motor, with over 300hp stock, with gears, better tranny with factory shift kit, take the money that you spent on your car, do that to the marauder and you will be really quick, and a SS Camaro LS1 well low to mid 13s stock with a 6spd and a set of stickys you can run 12.91-12.99s all day!! but ill give ya props

Towncar
04-29-2008, 02:31 AM
A stock marauder has a 32v cobra motor, with over 300hp stock, with gears, better tranny with factory shift kit, take the money that you spent on your car, do that to the marauder and you will be really quick, and a SS Camaro LS1 well low to mid 13s stock with a 6spd and a set of stickys you can run 12.91-12.99s all day!! but ill give ya props

If you only knew how much I spent on my car:laugh: marauders go for 15-25k easy. I could do the 10k motor I posted, and still have money left over.. Like I mentioned, the 04 cvpi's will run with a marauder. Less power than the marauder, but also lighter.

xhilr8n
04-29-2008, 04:37 AM
you shouldn't have spent that much money on what you have done to your car. List how much you have spent. Since you say you went to the track i would like to see a slip, with 60 ft times etc., and was it an 1/8th mile or 1/4 mile.

The more i think about it, my stock mustang with a five speed only ran low 13's with a small shot of spray, and it only weighed 3200 lbs, with a five speed and more favorable gears.

What was your 60' time etc. on your runs.


Jason

Towncar
04-29-2008, 11:57 AM
you shouldn't have spent that much money on what you have done to your car. List how much you have spent. Since you say you went to the track i would like to see a slip, with 60 ft times etc., and was it an 1/8th mile or 1/4 mile.

The more i think about it, my stock mustang with a five speed only ran low 13's with a small shot of spray, and it only weighed 3200 lbs, with a five speed and more favorable gears.

What was your 60' time etc. on your runs.


Jason

I havent spent much on my car at all. Most of the boltons I was able to get from friends that own shops locally for cheap. Cant find any slips for proof, So im either going to have to go out of town, or drive all the way to bristol, which I heard is terrible... We do have an 8th mile track real close that I could go to.. Not sure what 8th mile tracks prove though, which is why I havent been to that track. I will say this though, my time suprised me a bit, but it was windy, so who knows, it could have worked in my favor. Either way, I know to many vics in the 13s with stock motors..

smd4life
04-30-2008, 07:59 PM
pretty good, i worked for ford for 2 1/2 years as a mechanic and i drove more vics, stangs, and other similar ford cars, new 2006 GT stangs run mid 14s so if your running that quick then thats pretty good, because there was a 500hp vic with a 6-71 blower sticking out the hood this last summer only running 12.7s with slicks, that was tubed, with 4:56 gears, your stock 2:92 or 3:08 rear end gears with maybe 325-340 rwhp car weighing around 4000 lbs is not going to run that quick of times, you dont even have a cold air intake kit, 14 year olds atleast do that to there dodge colts when they get them, i been in the racing game for some time now, with mustangs, 350zs 300ZX TTs, LS1s LT1s vettes everything, buick GNs, my small block 355 roller S-10 was only doing 13.8s with 425hp at the fly wheel, with drag radials, i just dont see your boat of a car doing that good, and that video took for ever just to run from 50-100 high 13s sorry no way, i dont see it, i mean stock C5 vettes run that, some do 13.4-13.5s, i ran the firehawk against a stock 2003 red 6spd C5 he ran a 13.6 @ 102 in the 1/4 and i ran a 13.1 @ 108 in the 1/4 so 13.7s with just a 125 kit, that you most likely are only seeing around 80-95hp gain out of it, and your lil add ons, thats hard to do but ill give ya mad props if you run 13.7s, but you have to have a stall converter, or a line lock, or a tranny brake, because there is no way your going to get that heavy of a car up and moving like that, to run that good of times, and with stock rear end gears that had to do regardless, need at least 3:73s but for that heavy of a car 4:10/11s!your way to deep in the game for this cat....CAI *****ES!!!!

Towncar
05-01-2008, 04:02 AM
Here is a vid I had on my camera. It was with a lower shot of nitrous.


http://i240.photobucket.com/albums/ff237/fordcrownvictoria02/th_MOV00327.jpg (http://s240.photobucket.com/albums/ff237/fordcrownvictoria02/?action=view&current=MOV00327.flv)

Towncar
05-01-2008, 04:09 AM
Im debating on going to the bristol track this weekend, but its a concrete track...

Towncar
05-02-2008, 12:35 AM
Im going to bristol for some track time saturday, So We will see how she does there..

Towncar
07-18-2008, 11:39 PM
Couple new vids, hopefully some races happen tonight..

crusing with a friend in the car
http://i210.photobucket.com/albums/bb199/mycrownvic01/th_145.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=145.flv)


On my way to get some gas.

http://i210.photobucket.com/albums/bb199/mycrownvic01/th_146.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=146.flv)

Towncar
07-18-2008, 11:40 PM
Some tunes, and more mods coming soon, have had to deal with other things as of late..

97gp
07-18-2008, 11:43 PM
Hope you race right into a brick wall

badloser
07-18-2008, 11:49 PM
wow you were low on gas ...

Towncar
07-18-2008, 11:55 PM
Hope you race right into a brick wall

ok

Towncar
07-18-2008, 11:55 PM
wow you were low on gas ...

no kidding, i made it though...

GearGuy2001
07-19-2008, 02:12 PM
I was going to recommend doing the Jmod to your trans but I watched you one video and seemed like you might of already?

If not check it out, it will really firm up the shifts

Towncar
07-19-2008, 04:26 PM
I was going to recommend doing the Jmod to your trans but I watched you one video and seemed like you might of already?

If not check it out, it will really firm up the shifts

Nope, not jmodded yet. Thats one of the many mods on my list. Just have been busy... jmod/valvebody, gears will be my next upgrades.

JeepCreepin96
07-19-2008, 04:42 PM
get a vid of you winning a race?

dumple
07-19-2008, 04:53 PM
automatic ftl?

DeViOuSoNe
07-19-2008, 04:58 PM
There are alot of people in this thread that love to think they know what they are talking about. I am jsut gonna sit back and wait for the person I would like to pick on :)

the Pi running with the maruader made me laugh though..

Would you like to tell me the difference between the Pi and Non pi motors?

Towncar
07-19-2008, 05:08 PM
Pi vs non pi.. pi's have a different intake manifold, cams, ect.. Enough for about 30 hp in difference, which is substantial. I raced a non pi all motor, and pulled about 4 cars on him. As for a pi keeping up with a marauder, it will. 2004 pi will atleast.. In 2004 the cvpi got a power upgrade of 250 hp, and is lighter than a marauder... They run heads up..

Towncar
07-19-2008, 05:10 PM
automatic ftl?

How so? Only time the race doesnt favor an automatic is when going from a roll, since you arent in the power band. When dragging, and going off the line, its great. Plus, its not like you will ever miss a shift. Now when I get this new tune, and jmod it, their is no way someone can shift faster than this auto...

Towncar
07-19-2008, 05:16 PM
get a vid of you winning a race?

page 6&7

Alpine CDA-9815
07-19-2008, 05:45 PM
automatic ftl?
You FTL.

Towncar
07-19-2008, 05:48 PM
Got a new vid from last night vs a sentra with a large turbo. uploading soon

dumple
07-19-2008, 05:50 PM
ok but my grandma still drives the same car minus what you have done to it

Towncar
07-19-2008, 05:55 PM
ok but my grandma still drives the same car minus what you have done to it
Thats fine,but you have a saturn ion...

dumple
07-19-2008, 06:01 PM
id walk all over you

Towncar
07-19-2008, 06:03 PM
id walk all over you

proof of this? Still a saturn none the less. Nothing ide be braging about.. and saying automatic ftl pretty much summed up your dragging experience.. zero

dumple
07-19-2008, 06:15 PM
right automatic town car with NOS thats sweet ****. ok right i have zero drag experience but i still know that some high power race cars use automatic trannys.

And yea i own a saturn whoopdy dooo,

Towncar
07-19-2008, 06:21 PM
^^ Its a crownvic, and you still have yet to show proof your saturn is faster. Not bragging about my car, but ide like to see proof that your car can run. If no proof, then just move on out of the thread thanks.

DB_DRAG_SPL
07-19-2008, 06:50 PM
^^ Its a crownvic, and you still have yet to show proof your saturn is faster. Not bragging about my car, but ide like to see proof that your car can run. If no proof, then just move on out of the thread thanks.

Here ya go sweetheart, I'll put money this little 4 cyl. will take down that nitrous fed v8 any day of the week, oh yeah it's a 6 speed as well. ;)

Stage-2, 2.5L Short Block;
-(4340) I-Beam Rods
-Forged Pistons (8.5:1)
-Chromoly Pins
-Low Friction Pins
-Computer Balanced
-Forged Crank
-Cosworth Piston Coating: Antifriction Side and Thermal Barrier Top.
-Cosworth Coated: Main bearing upgrade.
-Cosworth Stage-2 Race Cams
-Heads (313 CFM @ .45 lift)
-Cosworth CNC Ported heads:EJ25
-Double springs (10K+RPM),
-1.5mm over sized intake valves
-1.0mm over sized exhaust valves
-Ported TGV
-Cosworth 14mm head studs
-Custom built 4"to 3.5 turbo back exhaust
-custom built up-pipe
-Equal length headers
-Garrett GT4088R
-Twin Tial 44mm wastegate
-Tial BOV
-10AN Aeromotive FPR fuel system
-1250cc top feed low impedance fuel injectors
-Fuel Rails
-PPG Dogbox w/ straight cut gears
-Hydra EMS tuned on 109 unleaded (Tuned by Junior)
-2600lbs w/ driver
-109 unleaded at @31psi dyno:

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/dyno.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/motor.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/TIMESLIP.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/viking4gr.gif

Towncar
07-19-2008, 06:51 PM
sentra with a huge turbo. My buddy got into the race a bit much last night.
http://i210.photobucket.com/albums/bb199/mycrownvic01/th_157.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=157.flv)

Towncar
07-19-2008, 06:52 PM
missed a shift

http://i210.photobucket.com/albums/bb199/mycrownvic01/th_158.jpg (http://s210.photobucket.com/albums/bb199/mycrownvic01/?action=view&current=158.flv)
[/quote]

Towncar
07-19-2008, 06:54 PM
Here ya go sweetheart, I'll put money this little 4 cyl. will take down that nitrous fed v8 any day of the week, oh yeah it's a 6 speed as well. ;)

Stage-2, 2.5L Short Block;
-(4340) I-Beam Rods
-Forged Pistons (8.5:1)
-Chromoly Pins
-Low Friction Pins
-Computer Balanced
-Forged Crank
-Cosworth Piston Coating: Antifriction Side and Thermal Barrier Top.
-Cosworth Coated: Main bearing upgrade.
-Cosworth Stage-2 Race Cams
-Heads (313 CFM @ .45 lift)
-Cosworth CNC Ported heads:EJ25
-Double springs (10K+RPM),
-1.5mm over sized intake valves
-1.0mm over sized exhaust valves
-Ported TGV
-Cosworth 14mm head studs
-Custom built 4"to 3.5 turbo back exhaust
-custom built up-pipe
-Equal length headers
-Garrett GT4088R
-Twin Tial 44mm wastegate
-Tial BOV
-10AN Aeromotive FPR fuel system
-1250cc top feed low impedance fuel injectors
-Fuel Rails
-PPG Dogbox w/ straight cut gears
-Hydra EMS tuned on 109 unleaded (Tuned by Junior)
-2600lbs w/ driver
-109 unleaded at @31psi dyno:

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/dyno.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/motor.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/TIMESLIP.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/viking4gr.gif

So is this his saturn ion? If not, then what was the point of you posting this.

jeeper07
07-19-2008, 06:58 PM
I dont know why so many of u are hating on this guy... its his car he can do what he wants? I think its pretty sweet. Im gonna have a 500hp engine in a truck and i guess i just wont post that up here because you have to have a 4 cyl turbo to go fast or something? any way towncar keep it up.

DB_DRAG_SPL
07-19-2008, 06:58 PM
So is this his saturn ion? If not, then what was the point of you posting this.

No this is a 600+ hp STi, and the point was you think your grandma grocery getter is king dong and you wanted to call him out. You stated that "If no proof, then just move on out of the thread thanks."

Here's your proof that a 4cyl with OMGz!! a 6 speed not t3h Sup3r Aw3s0me automatic, will walk all over you any day of the week, and when a little unsuspecting 4 cyl rolls up beside you and you think your NOS'd out boat is still king **** and all you see is taillights, please don't say that you haven't been warned.

Towncar
07-19-2008, 07:03 PM
No this is a 600+ hp STi, and the point was you think your grandma grocery getter is king dong and you wanted to call him out. You stated that "If no proof, then just move on out of the thread thanks."

Here's your proof that a 4cyl with OMGz!! a 6 speed not t3h Sup3r Aw3s0me automatic, will walk all over you any day of the week, and when a little unsuspecting 4 cyl rolls up beside you and you think your NOS'd out boat is still king **** and all you see is taillights, please don't say that you haven't been warned.

I called him out because he came in my thread talking down about my car with no proof of how his car outruns mine. I know their are 4cylinders that will kill my car, and I never thought my car was all high and mighty. YOu apparently cant read, or didnt understand what I said. He made an attack at my car, and I made one back at his. Leave it at that. thanks

Towncar
07-19-2008, 07:08 PM
Back to the original thread, that race with the sentra was probably the closest one ive had.. Pretty much neck and neck..

delvryboy
07-19-2008, 07:57 PM
No this is a 600+ hp STi, and the point was you think your grandma grocery getter is king dong and you wanted to call him out. You stated that "If no proof, then just move on out of the thread thanks."

Here's your proof that a 4cyl with OMGz!! a 6 speed not t3h Sup3r Aw3s0me automatic, will walk all over you any day of the week, and when a little unsuspecting 4 cyl rolls up beside you and you think your NOS'd out boat is still king **** and all you see is taillights, please don't say that you haven't been warned.

it's a nice car, but I would imagine with the money spent(car included) he could get that grocery getter into the 10's.

DeViOuSoNe
07-19-2008, 08:09 PM
I would like to say I bet you a MILLION dollars with the Jmod, I would WALK ALL OVER you id they ahd 5 speed's. Hand down no problem! I had a automatic GT before I got my 5 speed and it is night and day.

You can not leave as hard as I can. And even with Gears or a tune, you are not going to be shifting as high as I would.

I am not doubting your car, but I know what that car will run. I have more Mod motor **** than you have ever seen! I mentioned earlier in the thread, that if you needed anything to let me know.

But the more I read the more I laugh.

Just to let you know I have
07 Apearance Package gt500 Black and red
JLt cold air intake
Metco Pulley
And A tune.

And I hold the record for the fastest Gt500 on stock tires.

If you doubt me ask around corral Forums or get on you tube. 11.47 @ 121 going sideways.

Also have the Old TDC car
96 Gt with 66MM turbo, PA supercomp c-4. And a ton more!

And a all stock 07 GT.


So before saying **** think...It might be a carAudio forum, but that does not mean we do not know about car's.

If you do not believe me I will take some pics for you!

Liek I said before if you need any help ask me, or need any parts ask me. I can get anything you can for alot cheaper. PM me if you need ****.

ANd by no way am I bragging! Because I am paying out the *** for what I have! I am just trying to prove a point.


Kthanks bye.

lil_italy773
07-19-2008, 08:11 PM
Here ya go sweetheart, I'll put money this little 4 cyl. will take down that nitrous fed v8 any day of the week, oh yeah it's a 6 speed as well. ;)

Stage-2, 2.5L Short Block;
-(4340) I-Beam Rods
-Forged Pistons (8.5:1)
-Chromoly Pins
-Low Friction Pins
-Computer Balanced
-Forged Crank
-Cosworth Piston Coating: Antifriction Side and Thermal Barrier Top.
-Cosworth Coated: Main bearing upgrade.
-Cosworth Stage-2 Race Cams
-Heads (313 CFM @ .45 lift)
-Cosworth CNC Ported heads:EJ25
-Double springs (10K+RPM),
-1.5mm over sized intake valves
-1.0mm over sized exhaust valves
-Ported TGV
-Cosworth 14mm head studs
-Custom built 4"to 3.5 turbo back exhaust
-custom built up-pipe
-Equal length headers
-Garrett GT4088R
-Twin Tial 44mm wastegate
-Tial BOV
-10AN Aeromotive FPR fuel system
-1250cc top feed low impedance fuel injectors
-Fuel Rails
-PPG Dogbox w/ straight cut gears
-Hydra EMS tuned on 109 unleaded (Tuned by Junior)
-2600lbs w/ driver
-109 unleaded at @31psi dyno:


wow all that engine work and still in the high 11s...i did low 11.30s on 16psi boost motor is the B18c jap spec from canida my turd burner civic with half that **** u got done was faster....i love how ur air intake is placed were it is suckin up all the hot *** engine heat, intercooled or not.
http://i217.photobucket.com/albums/cc302/lil_italy773/mySiRTypeR7.jpg
http://i217.photobucket.com/albums/cc302/lil_italy773/mySiRTypeR8.jpg
http://i217.photobucket.com/albums/cc302/lil_italy773/mySiRTypeR2.jpg
http://i217.photobucket.com/albums/cc302/lil_italy773/mySiRTypeR1.jpg
http://i217.photobucket.com/albums/cc302/lil_italy773/mySiRTypeR6.jpg

DeViOuSoNe
07-19-2008, 08:12 PM
Here ya go sweetheart, I'll put money this little 4 cyl. will take down that nitrous fed v8 any day of the week, oh yeah it's a 6 speed as well. ;)

Stage-2, 2.5L Short Block;
-(4340) I-Beam Rods
-Forged Pistons (8.5:1)
-Chromoly Pins
-Low Friction Pins
-Computer Balanced
-Forged Crank
-Cosworth Piston Coating: Antifriction Side and Thermal Barrier Top.
-Cosworth Coated: Main bearing upgrade.
-Cosworth Stage-2 Race Cams
-Heads (313 CFM @ .45 lift)
-Cosworth CNC Ported heads:EJ25
-Double springs (10K+RPM),
-1.5mm over sized intake valves
-1.0mm over sized exhaust valves
-Ported TGV
-Cosworth 14mm head studs
-Custom built 4"to 3.5 turbo back exhaust
-custom built up-pipe
-Equal length headers
-Garrett GT4088R
-Twin Tial 44mm wastegate
-Tial BOV
-10AN Aeromotive FPR fuel system
-1250cc top feed low impedance fuel injectors
-Fuel Rails
-PPG Dogbox w/ straight cut gears
-Hydra EMS tuned on 109 unleaded (Tuned by Junior)
-2600lbs w/ driver
-109 unleaded at @31psi dyno:

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/dyno.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/motor.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/TIMESLIP.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/viking4gr.gif


Is that AWD? How do you leave the line? What size turbo is it? I would of expected to see a better number. I know I would be trying to build as much boost of the line if I ahd that

RAM_Designs
07-19-2008, 08:16 PM
And I hold the record for the fastest Gt500 on stock tires.

If you doubt me ask around corral Forums or get on you tube. 11.47 @ 121 going sideways.

weak sauce :D

lil_italy773
07-19-2008, 08:17 PM
love the crown vic man great car.

Towncar
07-19-2008, 09:18 PM
I would like to say I bet you a MILLION dollars with the Jmod, I would WALK ALL OVER you id they ahd 5 speed's. Hand down no problem! I had a automatic GT before I got my 5 speed and it is night and day.

You can not leave as hard as I can. And even with Gears or a tune, you are not going to be shifting as high as I would.

I am not doubting your car, but I know what that car will run. I have more Mod motor **** than you have ever seen! I mentioned earlier in the thread, that if you needed anything to let me know.

But the more I read the more I laugh.

Just to let you know I have
07 Apearance Package gt500 Black and red
JLt cold air intake
Metco Pulley
And A tune.

And I hold the record for the fastest Gt500 on stock tires.

If you doubt me ask around corral Forums or get on you tube. 11.47 @ 121 going sideways.

Also have the Old TDC car
96 Gt with 66MM turbo, PA supercomp c-4. And a ton more!

And a all stock 07 GT.


So before saying **** think...It might be a carAudio forum, but that does not mean we do not know about car's.

If you do not believe me I will take some pics for you!

Liek I said before if you need any help ask me, or need any parts ask me. I can get anything you can for alot cheaper. PM me if you need ****.

ANd by no way am I bragging! Because I am paying out the *** for what I have! I am just trying to prove a point.


Kthanks bye.


So what point were you trying to prove? I still think autos are better for the drag strip. If you have a gt500, then ofcourse you will kill me, auto, or not. I have a crownvic, bragging about being able to beat me in a shelby isnt saying much at all. 500hp supercharged 5.4 vs 300+ hp vic... With some work, on my stock block, just with nitrous and boltons, it can dip into the 12s nicely, as I have a buddy that has done a 12.7 with nos without going into the engine. I wouldnt mess with a gt500, i know my cars limits.. anyways

I would really like to have this n/a engine, but it is a hefty price.
http://i210.photobucket.com/albums/bb199/mycrownvic01/SOHCA.jpg

http://www.seanhylandmotorsport.com/modular_crate_engines.shtml

Towncar
07-19-2008, 09:19 PM
love the crown vic man great car.

A positive comment wow.. :laugh: Thanks

Ignatowski
07-20-2008, 09:24 AM
did this last friday http://img.photobucket.com/albums/v328/excelerater/Malibu/PIC_0122.jpg

id say my tune was off,too fat on the big end

Alpine CDA-9815
07-20-2008, 05:11 PM
Here ya go sweetheart, I'll put money this little 4 cyl. will take down that nitrous fed v8 any day of the week, oh yeah it's a 6 speed as well. ;)

Stage-2, 2.5L Short Block;
-(4340) I-Beam Rods
-Forged Pistons (8.5:1)
-Chromoly Pins
-Low Friction Pins
-Computer Balanced
-Forged Crank
-Cosworth Piston Coating: Antifriction Side and Thermal Barrier Top.
-Cosworth Coated: Main bearing upgrade.
-Cosworth Stage-2 Race Cams
-Heads (313 CFM @ .45 lift)
-Cosworth CNC Ported heads:EJ25
-Double springs (10K+RPM),
-1.5mm over sized intake valves
-1.0mm over sized exhaust valves
-Ported TGV
-Cosworth 14mm head studs
-Custom built 4"to 3.5 turbo back exhaust
-custom built up-pipe
-Equal length headers
-Garrett GT4088R
-Twin Tial 44mm wastegate
-Tial BOV
-10AN Aeromotive FPR fuel system
-1250cc top feed low impedance fuel injectors
-Fuel Rails
-PPG Dogbox w/ straight cut gears
-Hydra EMS tuned on 109 unleaded (Tuned by Junior)
-2600lbs w/ driver
-109 unleaded at @31psi dyno:

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/dyno.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/motor.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/TIMESLIP.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/viking4gr.gif
All of that money, work and only in the 11's? lmfao...

Ken448
07-24-2008, 12:13 AM
Here ya go sweetheart, I'll put money this little 4 cyl. will take down that nitrous fed v8 any day of the week, oh yeah it's a 6 speed as well. ;)
http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/dyno.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/motor.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/TIMESLIP.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/viking4gr.gif

626.7?? Thats on a chassis dyno, Id assume??? And in a 2600# car and ALL YOU COULD DO IS MID TO HIGH 11's!?! Id be UBER pissed at those time slips, and would not post them anywhere!

Why, may I ask does the dyno sheet say GT40?

jeeper07
07-24-2008, 12:16 AM
exactly what i was thinking but didnt really wanna hear more bs so i left it alone

DownSouth954
07-24-2008, 12:18 AM
@ 31 psi lmao jesus. There's no replacement for displacement :)

Buck
07-24-2008, 12:20 AM
no rpm gauge?

delvryboy
07-24-2008, 03:32 AM
626.7?? Thats on a chassis dyno, Id assume??? And in a 2600# car and ALL YOU COULD DO IS MID TO HIGH 11's!?! Id be UBER pissed at those time slips, and would not post them anywhere!

Why, may I ask does the dyno sheet say GT40?

I believe that's the model turbo

adas
11-09-2008, 01:59 PM
I'm spraying too. :D

The shits fun :hihorse:

williambrea
11-09-2008, 02:40 PM
i think a real challenge would to get my 1982 mercedes 4cyl diesel to get 100hp it only has 67 right now :D

AND IT HAS 4 GEARS!

HungNeckTight
11-12-2008, 01:47 AM
Here ya go sweetheart, I'll put money this little 4 cyl. will take down that nitrous fed v8 any day of the week, oh yeah it's a 6 speed as well. ;)

Stage-2, 2.5L Short Block;
-(4340) I-Beam Rods
-Forged Pistons (8.5:1)
-Chromoly Pins
-Low Friction Pins
-Computer Balanced
-Forged Crank
-Cosworth Piston Coating: Antifriction Side and Thermal Barrier Top.
-Cosworth Coated: Main bearing upgrade.
-Cosworth Stage-2 Race Cams
-Heads (313 CFM @ .45 lift)
-Cosworth CNC Ported heads:EJ25
-Double springs (10K+RPM),
-1.5mm over sized intake valves
-1.0mm over sized exhaust valves
-Ported TGV
-Cosworth 14mm head studs
-Custom built 4"to 3.5 turbo back exhaust
-custom built up-pipe
-Equal length headers
-Garrett GT4088R
-Twin Tial 44mm wastegate
-Tial BOV
-10AN Aeromotive FPR fuel system
-1250cc top feed low impedance fuel injectors
-Fuel Rails
-PPG Dogbox w/ straight cut gears
-Hydra EMS tuned on 109 unleaded (Tuned by Junior)
-2600lbs w/ driver
-109 unleaded at @31psi dyno:

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/dyno.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/motor.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/TIMESLIP.jpg

http://i22.photobucket.com/albums/b345/Undergr0undAssassins/OT%20Stuff/viking4gr.gif

i really hope you spin tires all the way down that track an thats why your times are so low for all that work. and the turbo civic with a riced out kid and ugly as **** wheels clames to be as fast as you... thats sad but what do i know my jetta runs a 13.9 and how i did that idk.

jdmferio13
11-12-2008, 06:53 PM
yeah maybe not thats an awd car whats he suppose to spin *******.nice ride but i think something is wrong with the driver at 31psi you should be running and trapping faster with higher speeds

HungNeckTight
11-14-2008, 08:50 PM
yeah maybe not thats an awd car whats he suppose to spin *******.nice ride but i think something is wrong with the driver at 31psi you should be running and trapping faster with higher speeds

so your saying that you cant spin tires with AWD???

i would think with 600hp to the wheels he could spin tires he hasn't done anything for traction.

cvjp417
11-14-2008, 11:18 PM
wtf that thing is fing fast