PDA

View Full Version : Box design 2-15 L7's



maritoze
03-11-2008, 12:34 AM
Hey Can anyone shoot me a box design for two 15 L7's with a slot port at 34hz...
Willing to pay for the design.
37x24x16( How many cubes would that be?)

BrianChia
03-11-2008, 01:16 AM
Space is a bit limited here for 2 15's. You'll probably be better off with just a single 15 L7 or see if you can get more room to work with.

maritoze
03-11-2008, 01:48 AM
how much more room do you think I believe i can go deeper and higher. but Width has to stay the same

BrianChia
03-11-2008, 04:47 AM
Right now you have about 6.5 cf gross, I would probably shoot for at least 4 cf per sub, plus the port will take up at least 1 cf.

ContourSPL
03-11-2008, 10:09 AM
what's the vehicle and how much power?

maritoze
03-11-2008, 06:29 PM
Its a 2002 Montero sport...As for Power Not quite sure yet most likley 1000 watts a peice Ive been Looking for an amp... Isnt 6.5 cubes enought the min. rating for a vented box is 3 cubes per sub right?

BrianChia
03-11-2008, 06:43 PM
Yes, but you still need to factor in the port displacement, driver displacement, and I would want double baffles for 2 L7 15s which further cuts out the net volume. If you can go a little bigger it would be best.

maritoze
03-11-2008, 06:54 PM
I understand...So how much more space would you say because I can go deeper. Would that be possible and maybe an inch or so higher

audiom3
03-11-2008, 07:03 PM
you need at least 9 cubes gross to give you enough volume for the minimum recc. if you need to calculate the volume go here http://www.the12volt.com/caraudio/boxcalcs.asp#frac
you need dimms of 37x28x18 to give you about 9 cubes gross with .75 mdf you can give it different depth and height if you need to switch those around hope this helps

maritoze
03-11-2008, 09:50 PM
^^^ and all that will only come out to 6 cubes with a slot port at 35 hz

BrianChia
03-11-2008, 10:03 PM
Just did some quick calcs for you:

37 x 28 x 17.25

will allow you to do a double baffled 6 cf box with a 105 sq. in. port tuned to 36 hz, assuming about .15 cf per sub. I don't have any experience with L7's so I don't know how it will sound but this falls within Kicker's minimum size recommendations with ample port area and tuning suitable for a daily driver.

maritoze
03-11-2008, 11:01 PM
Will That be easy for a first timer to do?I work well with tools and wood and have all the neccesitys but would it be a chalenge?