PDA

View Full Version : enclosure designed for 3 12 Rockford Fosgate HX2s



xDATx
03-03-2008, 03:39 PM
Hi, I need a sealed enclosure designed for 3 12 Rockford Fosgate HX2s. The specs from RF say 1.25cu ft, but I was think Id do 1 cu ft, would that work?

I also am going to mount the two outer subs normal and the one in the middle with the motor facing out. Please let me know some possible designs, and I will need cutout sheets as well.

And how much, would you charge for the cutout sheet?

Thanks