View Full Version : Check a box for me please

02-29-2008, 06:12 PM
height = 14
depth = 8
net volume = 1.75
tuning = 32
height x depth = 112

22.5 length port found form winisd.

.366 port displacement

2.116 gross volume

32.64 width found needed.

The reason i ask is because if you put those dimensions into the re calculator its way off. Put in 32x8x14 with 22.5 port total and it comes to 1.2 internal and 40hz tuning.


Also im making a wedge box that will be 7 at the top and 9 at the bottom, its it ok to assume 8 overall, since that will be the average depth.

Well i noticed one issue and that is not accounting for sub displacement, what should i assume for a kicker cvr 12.