View Full Version : Fi Q 12" Sealed in a 98 1500 Quad-Cab

02-27-2008, 04:17 PM
I cant find **** on box construction on the net. So i took some pictures of the backseat. Im willing to pay someone to try and figure out how i can get this sub in my truck with a sealed enclosure. The under side of the seat pushes up quiet a bit so in the back theres roughly 1.5-3 inches. Here are the pics:

02-27-2008, 04:18 PM

02-27-2008, 04:19 PM

02-27-2008, 04:20 PM
i dont have a video cam...stupid iphone doesnt have one built in either....

i mainly want to either take up the whole underside of the backseat or get something to take up the whole side of the drivers side backseat but leave the middle and passanger back seats open. im too tall no one can fit behind my seat lol.


Fs: 28.4 Hz | 27.1 Hz
Re: 0.7 Ohms/coil | 1.4 Ohms/coil
Qms: 05.39 | 5.63
Qes: .49 | .48
Qts: .45 | .44
Mms: 211g | 231g
Cms: 0.15mm/N | 0.15mm/N
Sd: 481cm^2 | 481cm^2
Vas: 48.3 l | 48.3 l
Spl: 85.4dB 1W/1m | 84.8dB 1W/1m
Bl: 10.4 N/A | 15.1 N/A
Xmax: 27mm
Rms: 1000W
Sealed box: .8-1.5 cuft
Ported box: 1.8-2.5 cuft @ 28-33Hz
Sub OD: 12.500”
Cut ID: 11.125”
Mounting depth: 7.000”
Displacement: 0.16cuft

i got Dual 1 with BP Power

02-27-2008, 04:24 PM
iphones don't have cameras?

02-27-2008, 04:26 PM
no its got a camera, i took these pics with the camera. But it doesnt do video.

02-27-2008, 04:27 PM
b/c i have a q but have yet to hook it up.....just interested in fiq's

02-27-2008, 05:12 PM

02-27-2008, 06:51 PM
any ideas?

02-27-2008, 07:43 PM
whoops I thought u already had them installed.........I would make your own plans. Not very hard to do esp. when dealing with sealed enclosures

02-27-2008, 08:00 PM
i dont even know where to begin on designing a box really. I dont even know if im going to be able to fit one in the backseat of my truck. Thats why im asking here, has anyone installed a 12" into a truck like mine or seen one done or anything?