PDA

View Full Version : front door speaker size?? - '91 crown vic



wschmidt22
02-24-2008, 05:17 PM
i can't figure out which size comps i should get to replace my factory speakers... speaker fit guides online tell me different sizes... i know it's either 6.5 or 5.25. i've measured them myself, but i'm no measurements i take come out to exactly 5.25 or 6.5.. how exactly do i go about determining what size i should get? and how do i measure the speaker in the door? is it from the outer edge of the bracket, or the outer edge of the surround foam?

BEAVER.989
02-24-2008, 06:21 PM
What kind of measurement did you come up with? If it's less than 6.5" get the 5.25".

...Or you could make a baffle and run just about whatever you want.

wschmidt22
02-24-2008, 07:15 PM
i pulled them out and they measure exactly 6" in diameter...

will get some pics next time i'm out there...

i prefer to keep everything stock in the case i decide to sell the car.. but what is this baffle you're talking about??

wschmidt22
03-01-2008, 08:37 PM
ok here are some pics..

reed dollaz
03-02-2008, 06:11 PM
is it that hard to understand that your tape measure doesnt even reach 6 inches so its obviously for a 5 1/4 inch speaker? ****