View Full Version : 10" Assassin ok in sealed box?
02-22-2008, 12:14 AM
I just bought an AA Assassin 10" for my single cab 95 f150. On the website it says this sub is good in small ported boxes, but Im not all that confident that I could build a good ported box, especially in the area I have to fit this thing. Here is the design I came up with, it's not to scale, but with 3/4" mdf the inner volume is about 1.3 cubic ft. I cant find any info or specs for volume for the Assassin, does anybody know? Is 1.3 ft too large?
02-22-2008, 12:24 AM
8" .5-.8 @ 33Hz
10" .8-1.25 @ 33Hz
12" 1.75-2.5 @ 33Hz
While they will work sealed, they are not always optimal for f3 and Qtc.
Direct quote. That's all I found tho.
02-22-2008, 12:28 AM
While they will work sealed, they are not always optimal for f3 and Qtc
What do f3 and Qtc mean? sorry Im such a noob!
02-22-2008, 12:30 AM
If im not mistaken Scott from FI said that they will work fine in a small sealed box as well like the old ones. But dont quote me on that, lol. I would suggest emailing him as he would prob be the best one to give advice on the sub.
02-22-2008, 12:34 AM
What is FI?
02-22-2008, 02:26 AM
Specs for the old 10" Assassin:
Sealed = 0.7 CuFt
Ported = 1.2CuFt Tuned 32 Hz
I'm guessing the new ones are pretty much the same...
02-22-2008, 12:12 PM
Sealed will be totally fine.
I'm sure they'll sound good too.
If you absolutely hate the sound try your hand at a ported box, they're not that hard once you try one.