PDA

View Full Version : New thread for starting my build



bones22
02-20-2008, 08:11 PM
im finally out of the army and just got back home today. i will be starting on the box for the 99Z 10 in the morning. im hoping my Lexan shows up tomorrow as well so i can get it done .

dumping approx. 9000 to it.

here it is again.
http://i27.tinypic.com/2yoxt8w.jpg

http://i26.tinypic.com/1o0ok1.jpg

chinxtaboi
02-20-2008, 08:34 PM
wow thats lotta power and moola, lookin forward to build pics. how much did that sub run you if i may ask?

ThatChevyGuy
02-20-2008, 08:35 PM
wow, 9000 from that amp? wow.

poundindak69
02-20-2008, 08:36 PM
cant wait till its all together with some vids

JG903
02-20-2008, 08:37 PM
Nice Gear.
I can't wait to see vids.

blackbonnie
02-20-2008, 08:45 PM
subscribed

bones22
02-20-2008, 10:04 PM
wow, 9000 from that amp? wow.

for now my cadence zrs9000d running off of 15.3volts and voltage drops

if it does blow up and i can track down a 2nd Z like it they will be reconed to 18s with a 9000D on each


will get pics up as soon as i get back from the lumber yard and start cutting. tomorrow looks to be a costly day. may as well buy some new tools while im at it.
which ***** since i just got out of the army tuesday and wont be seeing a check for about 2 or 3 more weeks from VA

bones22
02-20-2008, 10:16 PM
well an update i didnt know but my lexan was delivered yesterday so everything will go together tomorrow.

just need to build and amp rack and something to cover al the batteries which is easy enough once it starts going in

SPY
02-20-2008, 10:21 PM
:awesome:

bones22
02-20-2008, 10:24 PM
cant wait till its all together with some vids


Nice Gear.
I can't wait to see vids.

hopefully i will be able to get some vids up tomorrow to if its not to F**KIN cold out

MyFartsStink
02-20-2008, 10:26 PM
hopefully i will be able to get some vids up tomorrow to if its not to F**KIN cold out

hurry man I want to see a vid of this thing in action. Especially with that much power. :yumyum:

BuckyBoy
02-20-2008, 10:32 PM
I can't wait to see the build. :)

bones22
02-20-2008, 10:38 PM
I can't wait to see the build. :)

the only thing different than the design you did will be routing the DDs into one of the side and flushmounting the lexan from the inside behind the DDs.

which is why i am shopping for tools since most of mine are either missing or trashed from moving

MyFartsStink
02-20-2008, 10:43 PM
the only thing different than the design you did will be routing the DDs into one of the side and flushmounting the lexan from the inside behind the DDs.

which is why i am shopping for tools since most of mine are either missing or trashed from moving

I had the same exact problem before I rebuilt my box for my mt. I left all my good tools back in dallas in the storage unit. If I had a simple drill and glue, I would have been able to do it. But then my cousin's husband has all kindsa tools, so I built it there.

bones22
02-20-2008, 10:54 PM
I had the same exact problem before I rebuilt my box for my mt. I left all my good tools back in dallas in the storage unit. If I had a simple drill and glue, I would have been able to do it. But then my cousin's husband has all kindsa tools, so I built it there.

yea same thing with me. my stuff has been in louisiana for 14 months in storage well it wasnt good on it at all

Anniku989
02-21-2008, 12:34 AM
'scribed

can't wait for more pics and vid!!

Andrew12
02-21-2008, 12:37 AM
I bet you can't get everything done by noon.


Does peer pressure work online? Or is it called cyber bullying now?

Nice equipt man. I hope this all works out lol... twill be sick

PSturmer
02-21-2008, 12:51 AM
i dont get it. why would you have a single 10?

BuckyBoy
02-21-2008, 12:56 AM
i dont get it. why would you have a single 10?
joke?

bones22
02-21-2008, 01:44 AM
i dont get it. why would you have a single 10?

a single 10 that has put up numbers in the 170s hmm not to mention you will probably never find another since there are so few. if you do let me know ill buy it

well that and i got rid of the 800 pound of old equip in the truck since its a daily driver

bones22
02-21-2008, 01:45 AM
I bet you can't get everything done by noon.


Does peer pressure work online? Or is it called cyber bullying now?

Nice equipt man. I hope this all works out lol... twill be sick

by noon huh.
possible ill see what i can do

ngsm13
02-21-2008, 01:47 AM
Cool.

nG

bones22
02-21-2008, 12:56 PM
i got a late start this morning since i was feeling like sh*t

i will have some pics up after i eat lunch.

pioneerpimp
02-21-2008, 01:00 PM
this is just a guess, but i dont see a 170 in your future.

bones22
02-21-2008, 01:11 PM
this is just a guess, but i dont see a 170 in your future.

i have never said i would be hitting 170s.
i have a 4 door tahoe not a little car

Pop da Hatch
02-21-2008, 01:36 PM
:wave: get pics asap.

Atimm693
02-21-2008, 02:10 PM
Do work son!

poundindak69
02-21-2008, 02:18 PM
Where are the pics!!

bones22
02-21-2008, 04:03 PM
sorry got wrapped up in working on it pics in just a minute

Anniku989
02-21-2008, 04:03 PM
Fo sho, where's da pics?!

Edit:
NVM, waiting for pics to upload

bumpin buick
02-21-2008, 04:05 PM
sweet

bones22
02-21-2008, 04:29 PM
having issues with my camera but heres 1 of the pics
dont mind the glue i started to put one of the ends on the wrong end. it will get cleaned up

http://i25.tinypic.com/13ymbmq.jpg

blackbonnie
02-21-2008, 04:57 PM
top D looks a little mis-shaped

bones22
02-21-2008, 05:05 PM
top D looks a little mis-shaped

im sure its not perfect it is freehand. i still need to get the router out and round the edges so not to worried about it if they are a little off right now

blackbonnie
02-21-2008, 05:06 PM
then not bad for free hand

bones22
02-21-2008, 05:11 PM
then not bad for free hand

im happy with it so far.
would look a lot better if my tools hadnt been destroyed moving.

chinxtaboi
02-21-2008, 05:22 PM
what a tease.. keep the pics comin bro.

bones22
02-21-2008, 05:50 PM
http://i27.tinypic.com/2co5y7s.jpg

bones22
02-21-2008, 06:30 PM
http://i27.tinypic.com/9ftf0l.jpg

budahbuddy803
02-21-2008, 06:35 PM
where are you going to mount the sub?

edit: sorry, i am a dumb ***.

bones22
02-21-2008, 06:40 PM
where are you going to mount the sub?

edit: sorry, i am a dumb ***.

sub will be mounted on the top

blackbonnie
02-21-2008, 06:55 PM
where are you going to mount the sub?

edit: sorry, i am a dumb ***.

:laugh::laugh::laugh:

chinxtaboi
02-21-2008, 07:09 PM
so how are you closing off that dd part? wood behind it or plexi?

drivingreckless
02-21-2008, 07:12 PM
you gunna resin the inside???
what bracing you gunna have?
looks sweet...but an spl box with plexi???
g/l with your build

bones22
02-21-2008, 07:22 PM
its 3/4 Lexan

drivingreckless
02-21-2008, 07:23 PM
lexan ftw....

bones22
02-21-2008, 07:37 PM
lexan ftw....

yea yea. 3/4 thick tho ill get the same from it as i would 3/4 mdf

amartin_72
02-21-2008, 08:56 PM
I might be wrong but I think that should be at least double thick all the way around or some bracing? It may break and definitely isnt going to be as loud as it could be. Also needs a port that is a little more efficient looking and straight without bends. Unless the dimensions of that box were mandatory. Looks good though.

bones22
02-21-2008, 09:27 PM
I might be wrong but I think that should be at least double thick all the way around or some bracing? It may break and definitely isnt going to be as loud as it could be. Also needs a port that is a little more efficient looking and straight without bends. Unless the dimensions of that box were mandatory. Looks good though.

if it breaks ill just build a new one no big deal.
i dont have the pics up but there are 45s all the way around.
as for the bend having something other than 1 straight wall helps

the dimensions werent mandatory but considering my old box took up the entire storage area of the tahoe it was nice to save some space

9512ds
02-21-2008, 09:29 PM
i have never said i would be hitting 170s.
i have a 4 door tahoe not a little car

even with a little car, you would not do a 170s, or anywhere close.

bones22
02-21-2008, 09:44 PM
even with a little car, you would not do a 170s, or anywhere close.

so the fact 1 of these exact subs has done over a 170 isnt possible you are saying

IDSkoT
02-21-2008, 10:03 PM
so the fact 1 of these exact subs has done over a 170 isnt possible you are saying


OOOOOHHHHH!!!!!

BURNED!




Sorry, I thought if I helped the owning process maybe you would

GET TO WORK AND FINISH THIS SO WE CAN OOGLE OVER IT!


That'll be all. :D
:thumbsup:

bones22
02-21-2008, 10:06 PM
even with a little car, you would not do a 170s, or anywhere close.

and as i said before i NEVER once said i would be doing 170s.

in the vehicle its going in high 140 possibly low 150s i think is reasonable to expect

IDSkoT
02-22-2008, 12:46 AM
and as i said before i NEVER once said i would be doing 170s.

in the vehicle its going in high 140 possibly low 150s i think is reasonable to expect


I think I'm hittin' 70's. Chyea!

[I dunno how much it is, honestly... I have 2 10" 250-Watt JBLs. Not much SPL, I think. But, it does manage to vibrate my mirrors at like 25% volume. It's kinda annoying.]

BuckyBoy
02-22-2008, 12:50 AM
I think I'm hittin' 70's. Chyea!

[I dunno how much it is, honestly... I have 2 10" 250-Watt JBLs. Not much SPL, I think. But, it does manage to vibrate my mirrors at like 25% volume. It's kinda annoying.]
el oh el

bones22
02-22-2008, 03:08 PM
will have more pics up as soon as paint is dry. i hope i have enough suade left to cover it.
its way to nasty to get out to go buy more today

bones22
02-22-2008, 10:38 PM
my camera f**kin sh*t out on me have to get a new one. pics WILL be up in the morning.
should have vids by tomorrow night


going to try both my amps on it to see which works best
Z1a or my 9000D

BrianChia
02-22-2008, 10:54 PM
my camera f**kin sh*t out on me have to get a new one. pics WILL be up in the morning.
should have vids by tomorrow night


going to try both my amps on it to see which works best
Z1a or my 9000D

couldn't handle the badassness?

MyFartsStink
02-22-2008, 10:58 PM
my camera f**kin sh*t out on me have to get a new one. pics WILL be up in the morning.
should have vids by tomorrow night


going to try both my amps on it to see which works best
Z1a or my 9000D

hurry:veryhapp:

bones22
02-22-2008, 10:58 PM
couldn't handle the badassness?

couldnt handle the snow all day. im sure it got water in it no big deal needed a new one anyway

bones22
02-23-2008, 10:31 AM
almost done need to wet sand it to get rid of swirls

and yes i know the Ds are wrong but i did it that way because of how the box will have to go in the truck
http://i30.tinypic.com/akzi3t.jpg

MyFartsStink
02-23-2008, 10:56 AM
Whats the specs of the box. Sorry I didnt read

bones22
02-23-2008, 12:59 PM
Whats the specs of the box. Sorry I didnt read

1.85 internal
35.5hz

15nissen
02-23-2008, 03:02 PM
a single 10 that has put up numbers in the 170s hmm not to mention you will probably never find another since there are so few. if you do let me know ill buy it

well that and i got rid of the 800 pound of old equip in the truck since its a daily driver

I do not think you understand. The numbers that it put up was in a extreme comp car. ANY sub decent woofer would put up a good #. Good luck breaking a 150 +.


Its 90% install, 5% beer, 5% equipment.

bones22
02-23-2008, 03:06 PM
I do not think you understand. The numbers that it put up was in a extreme comp car. ANY sub decent woofer would put up a good #. Good luck breaking a 150 +.


Its 90% install, 5% beer, 5% equipment.

thanks for that info my 15s were in the 150s on music at the kick

so you are saying this isnt a decent sub?

MyFartsStink
02-23-2008, 03:06 PM
Its easy to be loud, its hard to sound good.

bones22
02-23-2008, 03:09 PM
taking a break from running new wire and decided to open the amp up to take a look

http://i25.tinypic.com/2mmidsy.jpg
http://i28.tinypic.com/2zqvv9e.jpg
http://i27.tinypic.com/209oayf.jpg

twisztdauthorit
02-23-2008, 03:11 PM
who gives a ****.. its a bitchen sub.

How much did that sheet of lexan cost?.
isn't lexan like 5-10x stronger then normal plexi or something?

15nissen
02-23-2008, 03:11 PM
thanks for that info my 15s were in the 150s on music at the kick

so you are saying this isnt a decent sub?

i have no idea, i have never used one. I hope its good because it was dam expensive.


word, my single 15 from my trunk was over a 150 in the kick too.

i will be in Springfield march 2nd-4th. I would love to hear this magic woofer.;)

bones22
02-23-2008, 03:12 PM
Its easy to be loud, its hard to sound good.

if anyone wants to know about the tahoe with the 4 daytona 15s in it send DD_Dave a pm he listened to it before he took the 15s off my hands.

more than loud enough and sounded good

bones22
02-23-2008, 03:14 PM
i have no idea, i have never used one. I hope its good because it was dam expensive.


word, my single 15 from my trunk was over a 150 in the kick too.

i will be in Springfield march 2nd-4th. I would love to hear this magic woofer.;)

you are more than welcome to. ill meet you in springfield.

WORD my 15s were in a 4 door tahoe. takes a little more to get that wouldnt you think.

maybe i should sell it and get some kicker huh F**K THAT been a while since they really had any great equip released

bones22
02-23-2008, 03:17 PM
who gives a ****.. its a bitchen sub.

How much did that sheet of lexan cost?.
isn't lexan like 5-10x stronger then normal plexi or something?

the lexan was $38 just a 12x24 sheet

15nissen
02-23-2008, 03:23 PM
you are more than welcome to. ill meet you in springfield.

WORD my 15s were in a 4 door tahoe. takes a little more to get that wouldnt you think.

maybe i should sell it and get some kicker huh F**K THAT been a while since they really had any great equip released


Kicker amps are quite strong / fuse friendly. But i was never trying to persuade you to run kicker? Either way i would love to have a few beers and listen to the new set up.

bones22
02-23-2008, 03:25 PM
Kicker amps are quite strong / fuse friendly. But i was never trying to persuade you to run kicker? Either way i would love to have a few beers and listen to the new set up.

they put out good power but the quality isnt as good as the older ones as far as im concerned. just my opinion.

if it doesnt do 150s for some reason i can always have it reconed to a 15 or 18 for a few hundred bucks

Anniku989
02-23-2008, 03:32 PM
who gives a ****.. its a bitchen sub.

How much did that sheet of lexan cost?.
isn't lexan like 5-10x stronger then normal plexi or something?

Lexan doesn't necessarily mean its the bullet proof stuff, there's different types FYI

bones22
02-23-2008, 04:14 PM
Lexan doesn't necessarily mean its the bullet proof stuff, there's different types FYI

this is true. i could have got bulletproof but why spend the extra $80 on the small sheet i got

BrianChia
02-23-2008, 04:44 PM
this is true. i could have got bulletproof but why spend the extra $80 on the small sheet i got

Whoah, don't get too excited about Lexan, guys. Here is a brief lesson on "bullet proof" stuff.

Lexan is simply a brand name of polycarbonate, which is a simple clear plastic.

Much like Plexiglas is a brand name of acrylic.

Either material can be used in manufacturing bulletproof glass although polycarbonate is typically tougher and more impact resistant.

The material itself is not bulletproof at all. It is way too SOFT.

Bulletproof glass is made of temepered glass laminated to a clear plastic, either acrylic of polycarbonate (usually the latter) in multiple layers. It must be laminated to tempered glass in order to have any ballistic properties at all. Without a glass layer(s) the bullet would go straight through the plastic. Only the glass is hard enough stop penetration from the bullet. The laminate layers of polycarbonate is used to hold the glass together and help absorb some of the impact, preventing it from shattering. Like any ballistic material it comes in varying grades and cannot stop the penetration of all rounds.

This works similar to a trauma plate used in body armor. The trauma plate is usually ceramic which is hard enough to stop a bullet but shatters upon impact. It is usually laminated to a composite to hold it together during impact.

It is a common misconception that products with "Lexan" or "Kevlar" have bullet-resistance properties. It is the process of manufactuing that incorportates these materials which gives a final product that has ballistic properties.

bones22
02-23-2008, 05:04 PM
Whoah, don't get too excited about Lexan, guys. Here is a brief lesson on "bullet proof" stuff.

Lexan is simply a brand name of polycarbonate, which is a simple clear plastic.

Much like Plexiglas is a brand name of acrylic.

Either material can be used in manufacturing bulletproof glass although polycarbonate is typically tougher and more impact resistant.

The material itself is not bulletproof at all. It is way too SOFT.

Bulletproof glass is made of temepered glass laminated to a clear plastic, either acrylic of polycarbonate (usually the latter) in multiple layers. It must be laminated to tempered glass in order to have any ballistic properties at all. Without a glass layer(s) the bullet would go straight through the plastic. Only the glass is hard enough stop penetration from the bullet. The laminate layers of polycarbonate is used to hold the glass together and help absorb some of the impact, preventing it from shattering. Like any ballistic material it comes in varying grades and cannot stop the penetration of all rounds.

This works similar to a trauma plate used in body armor. The trauma plate is usually ceramic which is hard enough to stop a bullet but shatters upon impact. It is usually laminated to a composite to hold it together during impact.

It is a common misconception that products with "Lexan" or "Kevlar" have bullet-resistance properties. It is the process of manufactuing that incorportates these materials which gives a final product that has ballistic properties.

yes i know thats why a small piece was going to be over 100

bones22
02-23-2008, 08:04 PM
everything is in just need to hook up power and grounds and a few little things in the morning. to dark to get good pics

Pl8er
02-23-2008, 08:16 PM
Looking good.

IDSkoT
02-24-2008, 03:08 AM
el oh el

lmao, bucky. It's true. I think I need better mirrors or something, or my subs are like WTFMAZING, which I doubt they are.
I'll be jammin' on the road and I go to see if I can switch lanes and I can't see **** 'cause it's seizuring on me. :(

BrianChia
02-24-2008, 03:12 AM
lmao, bucky. It's true. I think I need better mirrors or something, or my subs are like WTFMAZING, which I doubt they are.
I'll be jammin' on the road and I go to see if I can switch lanes and I can't see **** 'cause it's seizuring on me. :(

You need to dynamat your mirrors bro.

MyFartsStink
02-24-2008, 12:17 PM
still waiting on the vids. hurry.

bones22
02-24-2008, 01:22 PM
finally done!
as soon as my neighbor leaves for work ill get some vids. always pisses her off when i have my sh*t going 3 feet from her windows

dont mind the paint and saw dust i still need to wet sand and clean the saw dust off. there are a few little things other than that i need to do but i needed to get it done and out of the way in the house.

http://i29.tinypic.com/142zu61.jpg
http://i27.tinypic.com/263d180.jpg
http://i29.tinypic.com/2csgkqv.jpg
http://i26.tinypic.com/rvkp5f.jpg
http://i26.tinypic.com/14bkvhu.jpg

FeS RoY
02-24-2008, 05:13 PM
nice, you listened to it yet? if so how does it sound? any vids yet?

FeS RoY
02-24-2008, 05:14 PM
oh and does that amp do rated power?

IDSkoT
02-24-2008, 05:14 PM
You need to dynamat your mirrors bro.

You want me to wrap my rear-view mirror in dynamat? Haha. Besides, it's not that big of a deal. Not really work it. But, I might have to. It keeps vibrating it off the holder that's attached to the windshield. :x

IDSkoT
02-24-2008, 05:15 PM
Wow, that Lexan is really shiny. :o

Looks good, though. But, you need to fix the paint for sure. :D No use in skimping on such a bada** job.

Wkbdkid
02-24-2008, 06:27 PM
The lexan looks sick. IMO screws should've been countersunk an filled with wood filler. Other than that good job.

bones22
02-24-2008, 06:37 PM
nice, you listened to it yet? if so how does it sound? any vids yet?


yes it has great low end. sounds great off whatever type of music. still need to fine tune wjen it warms up a little


oh and does that amp do rated power?

YES and then some.



Wow, that Lexan is really shiny. :o

Looks good, though. But, you need to fix the paint for sure. :D No use in skimping on such a bada** job.

just been to cold to work outside much. it will get done for sure


The lexan looks sick. IMO screws should've been countersunk an filled with wood filler. Other than that good job.

all screws on the face and top are. when i wet sand i hope it is less visable to see them

dvrmstrng
02-24-2008, 06:40 PM
i think high 140's is conservative of you given the power and sub....if i can do 146.6 at the dash with 1500 watts and an SQ woofer...id imagine 9k and a 99z should blow that away

bones22
02-24-2008, 06:43 PM
i think high 140's is conservative of you given the power and sub....if i can do 146.6 at the dash with 1500 watts and an SQ woofer...id imagine 9k and a 99z should blow that away

only reason i said 140s low 150s is i didnt want to be "that guy" saying im doing 160s or whatever and look like an ***.
as soon as i can get it to my buddies shop ill meter it and get pics. new TL of course

bones22
02-24-2008, 06:45 PM
i think high 140's is conservative of you given the power and sub....if i can do 146.6 at the dash with 1500 watts and an SQ woofer...id imagine 9k and a 99z should blow that away

only reason i said 140s low 150s is i didnt want to be "that guy" saying im doing 160s or whatever and look like an ***.
as soon as i can get it to my buddies shop ill meter it and get pics. new TL of course

when i listened to it i admit it doesnt have the lows of the 4 15s obviously. i have a feeling though low 150s off music is where ill be

bones22
02-24-2008, 06:59 PM
well here we go. not a great vid but will get more.
took it with my cell phone. didnt pick up the bass to well i guess i need to lower my my highs they were screaming

sub level negative 4 on the deck
volume at 16 dont need to go up to the 47 it goes to
gains about 1/8th of the way up

View My Video (http://tinypic.com/player.php?v=262vb84&s=3)

dvrmstrng
02-24-2008, 07:02 PM
ha frame rate on that camera is so low it barely looks like its moving....

whats the song?

bones22
02-24-2008, 07:10 PM
ha frame rate on that camera is so low it barely looks like its moving....

whats the song?

yea its a new camera i have to mess with it. i assure you it was moving. far more than my 15s ever did

dont remember the song off hand its on a disk i burned ill get it though

ill get better vids tomorrow

FeS RoY
02-24-2008, 07:16 PM
ha frame rate on that camera is so low it barely looks like its moving....

whats the song?

Pimp C - Knocking Doors Down

bones22
02-24-2008, 07:21 PM
Pimp C - Knocking Doors Down

beat me to it i just had to run out and check
thanks man

tommyk90
02-24-2008, 10:05 PM
Hate to be the bearer of bad news, but that amp will never do 9000 watts.

Hell, it's only rated for 6000 RMS and you would be lucky to see that out of a cadence amp.

bones22
02-24-2008, 10:07 PM
Hate to be the bearer of bad news, but that amp will never do 9000 watts.

Hell, it's only rated for 6000 RMS and you would be lucky to see that out of a cadence amp.

hell, its rated at [email protected]
come down and test it im seeing over 6k. im running 14.6-14.7volts drops to around 14.1

what amp would you suggest i use if cadence is such sh*t

tommyk90
02-24-2008, 10:10 PM
hell, its rated at [email protected]
come down and test it im seeing over 6k. im running 14.6-14.7volts drops to around 14.1

what amp would you suggest i use if cadence is such sh*t

Not trying to bash it or anything, but if you think you are somehow getting 3000 more watts over rated power out of it because of a 1 volt increase in input voltage, you are delusional.

That model cadence is actually pretty solid, same board as the american bass 500.1. But to think its doing 9000 watts is just crazy.

Besides, music is dynamic and that sub will probably never see a true 6000 watts anyways. Not trying to be a d*ck, just stating the facts. Some people tend to go overboard when boasting about their equipment.

bones22
02-24-2008, 10:13 PM
Not trying to bash it or anything, but if you think you are somehow getting 3000 more watts over rated power out of it because of a 1 volt increase in input voltage, you are delusional.

That model cadence is actually pretty solid, same board as the american bass 500.1. But to think its doing 9000 watts is just crazy.

Besides, music is dynamic and that sub will probably never see a true 6000 watts anyways.

ok well thanks for your words of wisdom. im not bragging or going overboard. mearly stating what was told by the people who make it.

maybe im not seeing 9k. then again i could be.
maybe i should sell it and buy kicker

tommyk90
02-24-2008, 10:13 PM
ok well thanks for your words of wisdom.

Any time.

bones22
02-24-2008, 10:20 PM
Any time.

whatever power im putting out ill let numbers speak for themselves.
ill get it metered as soon as i can

tommyk90
02-24-2008, 10:26 PM
ok well thanks for your words of wisdom. im not bragging or going overboard. mearly stating what was told by the people who make it.

maybe im not seeing 9k. then again i could be.
maybe i should sell it and buy kicker

Never told you to buy kicker...ever.

Just merely stating that your amp is not doing 9000 watts. Will it do rated power? Sure. Maybe a bit more with a good electrical? Sure, why not.

But 9000 watts? Come on now.


whatever power im putting out ill let numbers speak for themselves.
ill get it metered as soon as i can

Please do. I'd be interested to see what it does in such a large vehicle.

Not exactly the design I would have gone with, but if it works for you then thats all that matters.

galacticmonkey
02-25-2008, 04:40 PM
That amp doing 9,000rms = lawl.

You doing a 150+ legal with that setup in a musical box = lawl.

This should be interesting.

casper97ta
02-25-2008, 05:01 PM
Congrats on some nice gear and a nice build,but quit jumping down everybody's throat when they offer constructive criticism. You're really coming off high and mighty because you're running a 99z. Chill out man. ;)

bones22
02-25-2008, 05:03 PM
That amp doing 9,000rms = lawl.

You doing a 150+ legal with that setup in a musical box = lawl.

This should be interesting.


NEVER SAID 9000RMS

try reading i said with my 4 15" DAYTONAS

Pop da Hatch
02-25-2008, 05:09 PM
:wave: Cant wait for the numbers to do the talking.

bones22
02-25-2008, 05:11 PM
:wave: Cant wait for the numbers to do the talking.

i should be able to get in tomorrow to get them

bones22
02-25-2008, 06:02 PM
Congrats on some nice gear and a nice build,but quit jumping down everybody's throat when they offer constructive criticism. You're really coming off high and mighty because you're running a 99z. Chill out man. ;)

not coming off high and mighty at all. there has been very little mention about the Z its been more bashing my amp or people that fail to read and think im saying im going to do doing extremely high numbers when i clearly stated a more than reasonable number of 140s MAYBE 150s

i guess i should be like everyone else and use mainstream equip

ThatChevyGuy
02-25-2008, 06:19 PM
get a better vid.

bones22
02-25-2008, 06:22 PM
get a better vid.

if i can get into my buddies shop tomorrow ill get vids with his camera when its getting metered

poundindak69
02-25-2008, 07:23 PM
nice setup there cant wait for the number and a better vid

bumpin buick
02-25-2008, 07:34 PM
im guessing a 152.1

bones22
02-25-2008, 07:35 PM
im guessing a 152.1

id be more than happy with that.

galacticmonkey
02-25-2008, 09:11 PM
NEVER SAID 9000RMS




dumping approx. 9000 to it.

Glad you never said you were going to give it 9,000rms.

And Im also glad Digital Designs is soooo underground. Wow, Id never think of someone using a DDZ for SPL! :laugh:

This thread is funny.

bones22
02-25-2008, 09:15 PM
Glad you never said you were going to give it 9,000rms.

And Im also glad Digital Designs is soooo underground. Wow, Id never think of someone using a DDZ for SPL! :laugh:

This thread is funny.

i was talking about cadence dumb ***
if i could get a cadence boner going like other companies on here no one would question the amp.
all i know is the amp puts out great power. dont like it F**K OFF and sh*t on somoene elses thread

galacticmonkey
02-25-2008, 09:32 PM
See the string between your legs?


Pull it.
Heat up a glass of water.
Dunk the tampon in water.
Drink the vag-tea.


:fyi:

bones22
02-25-2008, 09:35 PM
See the string between your legs?


Pull it.
Heat up a glass of water.
Dunk the tampon in water.
Drink the vag-tea.


:fyi:


that was cute im sorry if you are using whats between your legs to compare to other men. trust me there are bigger than the "string" you speak of that you must be swinging

galacticmonkey
02-25-2008, 09:41 PM
I have a *****.

You have a string because its connected to the tampon thats in your ******.

And apparently its that time of the month.

:yureawsm:

bones22
02-25-2008, 09:45 PM
I have a *****.

You have a string because its connected to the tampon thats in your ******.

And apparently its that time of the month.

:yureawsm:

if its that time of the month its because of *****es who have nothing better to do than troll the threads shi*ting on peoples equip.
people like you are what make the forums such **** these days.

im happy for you that you have a ***** most men would say they had a DI CK though. says a lot about you

galacticmonkey
02-25-2008, 09:47 PM
Proper anatomical terminology isnt cool anymore? :confused:

I didnt get the memo. :fyi:

bones22
02-25-2008, 09:49 PM
Proper anatomical terminology isnt cool anymore? :confused:

I didnt get the memo. :fyi:


thanks for you imput. goodluck with life it cant get much lower for you i imagine

galacticmonkey
02-25-2008, 09:52 PM
Low? Like the song?

Boots with the fur? :confused:

TheFiverMan
02-25-2008, 10:13 PM
strap 2 SAE-3000ds to it..

bumpin buick
02-25-2008, 10:17 PM
Saz-3000*

bumpin buick
02-25-2008, 10:17 PM
and as for galactic monkey if you have nothing good to say please dont say it, make your own thread

chinxtaboi
02-26-2008, 03:17 AM
i dont get it.. so this amp puts out 9k? or 6k? didnt read the whole thread. solid equip either way.

Atimm693
02-26-2008, 08:26 AM
i dont get it.. so this amp puts out 9k? or 6k? didnt read the whole thread. solid equip either way.

He said 9k, Tommy said 6k, which he wont even get in a daily app. 6k.

And **** did this thread take a turn for the worse.

galacticmonkey
02-26-2008, 07:08 PM
He says he will be dumping 9krms to it. He wont... Luckily. If he gave the sub 9k he would be buying a new recone every time he played it.

bones22
02-26-2008, 07:11 PM
He says he will be dumping 9krms to it. He wont... Luckily. If he gave the sub 9k he would be buying a new recone every time he played it.

the Zs have been burped on 15k +

do me and others a favor leave this thread move on to someone else. people like you make having to pay for these sites sound like a good idea. either you cant afford it or have the option to block you from posts

tommyk90
02-26-2008, 07:33 PM
the Zs have been burped on 15k +

do me and others a favor leave this thread move on to someone else. people like you make having to pay for these sites sound like a good idea. either you cant afford it or have the option to block you from posts

Who has burped them on 15kw?

That's right, not you.

MikeyB
02-26-2008, 07:36 PM
Wow what happened to this thread? lol

bones22
02-26-2008, 09:00 PM
Who has burped them on 15kw?

That's right, not you.

did i ever say i burped it with 15k+ you worthless f uck

sorry you are to slow to understand what you read. get a better education

bones22
02-26-2008, 09:03 PM
Wow what happened to this thread? lol

a bunch of a ss wipes that have nothing better to do than troll threads and trash them.
this is nothing more than a build log to show people since its nice to see

a ssholes that dump should get an IP BAN!!!!

tommyk90
02-26-2008, 09:10 PM
did i ever say i burped it with 15k+ you worthless f uck

sorry you are to slow to understand what you read. get a better education

So why even mention that somebody else has burped them with 15kw?

That in no way is related to your application.

I've seen L7's get burped with 5000 watts, does that mean I would recommend that for daily? Hell no.

tommyk90
02-26-2008, 09:10 PM
a bunch of a ss wipes that have nothing better to do than troll threads and trash them.
this is nothing more than a build log to show people since its nice to see

a ssholes that dump should get an IP BAN!!!!

Welcome to ca.com.

FYI, you're blowing this **** way out of proportion. You should work on that.

bones22
02-26-2008, 09:15 PM
Welcome to ca.com.

FYI, you're blowing this **** way out of proportion. You should work on that.

nothing out of proportion
it gets old seeing the SAME people dumping

dont like it or agree with someone leave the thread

tommyk90
02-26-2008, 09:18 PM
nothing out of proportion
it gets old seeing the SAME people dumping

dont like it or agree with someone leave the thread

The only reason i commented is because I don't like it when people spread false/exaggerated information.

Unsuspecting people read some of this stuff and believe it, only to be disappointed later on when their equipment doesn't live up to their expectations.

If that's considered post dumping, then I'd hate to see what you would do if people were ACTUALLY post dumping.

bones22
02-26-2008, 09:22 PM
The only reason i commented is because I don't like it when people spread false/exaggerated information.

Unsuspecting people read some of this stuff and believe it, only to be disappointed later on when their equipment doesn't live up to their expectations.

If that's considered post dumping, then I'd hate to see what you would do if people were ACTUALLY post dumping.

then call cadence tell them to re-rate their products and i will state whatever i am told from them

agree to disagree the amp puts out a lot of power whatever it is and its a nice piece of equip

ngsm13
02-26-2008, 09:22 PM
This isn't the classifieds feg.

People are allowed to disagree and have their own opinions. You can choose to ignore them.

:fyi:

nG

bones22
02-26-2008, 09:24 PM
This isn't the classifieds feg.

People are allowed to disagree and have their own opinions. You can choose to ignore them.

:fyi:

nG

fair enough but no reason for them anyone to act an ***. its their choice to get the F out of the thread and leave it for people who actually want to see how it goes

tommyk90
02-26-2008, 09:25 PM
then call cadence tell them to re-rate their products and i will state whatever i am told from them

agree to disagree the amp puts out a lot of power whatever it is and its a nice piece of equip

cadence rated their amp just fine.

You're the one claiming 9000 watts out of it.

Sure it puts out a lot of power, its a good zenon board (same board as the american bass 500.1). I never argued that at all.

The one beef I had was you trying to say its going to miraculously put out 3000 watts over rated power.

galacticmonkey
02-26-2008, 09:26 PM
I wanna see how it goes...

So I'll stay.

bones22
02-26-2008, 09:27 PM
cadence rated their amp just fine.

You're the one claiming 9000 watts out of it.

Sure it puts out a lot of power, its a good zenon board (same board as the american bass 500.1). I never argued that at all.

The one beef I had was you trying to say its going to miraculously put out 3000 watts over rated power.

go to the site man i quoted straight from cadence 10k max

galacticmonkey
02-26-2008, 09:27 PM
Thats max.

You fail.

bones22
02-26-2008, 09:29 PM
Thats max.

You fail.

and you fail at life so we are even

tommyk90
02-26-2008, 09:29 PM
go to the site man i quoted straight from cadence 10k max

Don't ever use MAX power when claiming ACTUAL power.....ever.

bones22
02-26-2008, 09:33 PM
Don't ever use MAX power when claiming ACTUAL power.....ever.

fair enough

galacticmonkey
02-26-2008, 09:34 PM
and you fail at life so we are even

That hurt my feelings. :fyi:

So are you actually making any progress toward getting metered?

bones22
02-26-2008, 09:34 PM
That hurt my feelings. :fyi:

So are you actually making any progress toward getting metered?

wasnt able to get in today had other BS to deal with since im just getting home from the service.

should be able to tomorrow afternoon

MyFartsStink
02-26-2008, 09:35 PM
wow this thread turned to hell. but I want to see better vids really.

bones22
02-26-2008, 09:36 PM
wow this thread turned to hell. but I want to see better vids really.

ill do the best i can with what i have. will post asap

gladiator_jai
02-26-2008, 10:20 PM
11 pages of complete entertainment.....comedy, violence, tampons.....so on

Cant wait to see the video and the numbers.... looks good bro

astross89
02-27-2008, 03:57 PM
I cant find the first vid. please someone repost the link

MyFartsStink
02-28-2008, 09:22 AM
I cant find the first vid. please someone repost the link

Read a little more I think you can find it, its in a link, not a pic link

galacticmonkey
02-29-2008, 02:24 PM
So the sub is sold? Worklog is over?

Brassler07
02-29-2008, 02:51 PM
i just find it funny a guy who blew the **** out of 8 btls being a ******* is critiquing some elses system. :rotflol:

galacticmonkey
03-01-2008, 12:37 AM
I never actually blew a BTL. :fyi:

Go play with your single 15.

casper97ta
03-01-2008, 12:55 AM
So the sub is sold? Worklog is over?

The sub has been on ebay for a couple days now. I hope he chimes in to say why he changed his mind on the build. I was really curious to see what that sub could do.

bones22
03-01-2008, 01:00 AM
The sub has been on ebay for a couple days now. I hope he chimes in to say why he changed his mind on the build. I was really curious to see what that sub could do.

a lot of intrest about it there. i need money more than bass right now. if by some chance it doesnt sell i will put it back in and spend the $10 to see what it puts up.

i hate to try it now and f uck it up and not be able to sell it

of course its listed for a pretty penny since I DONT WANT to sell it

reserve is a good bit lower though

TreyE
03-09-2008, 01:32 AM
boo want more vids!!

jadon087
03-09-2008, 01:44 AM
put it back in and get us some number man.

bones22
03-09-2008, 03:33 AM
sub was sold.

something new coming over the next week or 2

Zeuslicious
03-09-2008, 04:31 AM
Can't belive I just read 11 funny pages and I couldn't find a d@mn Video...
What's going to be the next setup?

dtbrown
03-09-2008, 09:05 AM
The vid is on page 5 or 6

MTXman
03-09-2008, 12:23 PM
Actually, its on a page 7, linked.

Zeuslicious
03-09-2008, 01:21 PM
Thanks, But.... Not flex?

galacticmonkey
03-09-2008, 03:42 PM
Didnt you sell the sub/amp because you needed cash? Then how do you plan on having a bigger setup in like a week? Doesnt that defeat the purpose of getting rid of the setup in the first place?

TheFiverMan
03-09-2008, 03:43 PM
i wouldve had that10" reconed to an 18..

bones22
03-09-2008, 03:50 PM
Didnt you sell the sub/amp because you needed cash? Then how do you plan on having a bigger setup in like a week? Doesnt that defeat the purpose of getting rid of the setup in the first place?

i sold the sub and amp cause i needed $ yes. wife got her tax returns and got me some new subs.
i already had the amps

bones22
03-09-2008, 04:10 PM
more than enough mdf around to build several boxes so no loss there.

ill start a thread for the build as soon as my subs get here.

bones22
03-09-2008, 04:22 PM
didnt you sell this sub this week on ebay?

no i sold it on here yesterday. the amp was also sold on here last a few days ago.

bones22
03-09-2008, 04:43 PM
what did you cut the box pieces out with , an air hammer? looks like hammered fruck... good sub, box that should be used for fire wood, and a boat ancor amp... huh, interesting

looks to me like i never got around to wet sanding the paint.
as for any ruff edges well lets see i have a circular saw and a jig saw i was using other than the table saw for longer cuts..