PDA

View Full Version : box design for 2-15in L7's, please!



slconde
02-19-2008, 11:37 PM
i have a 2006 dodge charger and here are my max dimensions for a...
single box
height-17.5in
width-37in
depth-23in

this is if i put 2 boxes, the reason for this is because the opening of my trunk isnt that big, but the trunk it self is a decent size, this is the max dimensions total..

height-17 1/2in
width-37in
depth-27in

here is an idea i had, i have a vent that is about 24in x 10in in my rear deck
http://i63.photobucket.com/albums/h156/htx_s3xii_mzkrystal/STEVE/l7design.jpg

feel free to add on to this or totally change the idea. also, i have no tuning or anything to this rought draft so please provide exact measurements and tuning.
THANX!!!

mobeious
02-19-2008, 11:43 PM
well being that u only have 7.06 cubes i dont think u will get them ported

BrianChia
02-19-2008, 11:44 PM
Edit....nevermind.

slconde
02-19-2008, 11:45 PM
i already have a cut on the rear deck, its about 24x10
thats what the black rectangle on my pic represents.

mobeious
02-19-2008, 11:57 PM
u will never fit ported in there u would need a minimum of 8-9 cubes for ported

slconde
02-20-2008, 12:20 AM
i know it can be done cuz check this guys set up
http://i63.photobucket.com/albums/h156/htx_s3xii_mzkrystal/STEVE/2595932_5_full.jpg

mobeious
02-20-2008, 12:35 AM
sure it can be done in the wrong size box with the dimentions u gave me it will not work

TheFiverMan
02-20-2008, 12:47 AM
why not juss 2 12 L7s?

mlstrass
02-20-2008, 02:07 AM
That box in the pic is about the right size for ONE L7...

tez4life
02-20-2008, 02:12 AM
why not juss 2 12 L7s?


agreed



That box in the pic is about the right size for ONE L7...


agreed as well, 2 15s would be nice but not at the expense of a box thats too small. Its not going to do low notes very well. Why not a single 15 or (2) 12s ported?