My new speakers With right up.

[Techchild]

I installed my poineer rev 6.5 components today sound great.
How should I angle my tweeters?


But heres a write up on how to install components with flush mount.
I don't have all the pictures on how to remove the door panels because if you don't know how to do that you shouldent be reading this.

Step 1: remove door

Step 2: Find out were you whant to mount the tweeters.
http://img412.imageshack.us/img412/8482/dsc01847mediumku6.jpg

Step 3: Put down painters tape and draw template.
http://img529.imageshack.us/img529/2305/dsc01848mediumem2.jpg

Step 4: Drill hole
http://www.youtube.com/watch?v=2tzwCV7tAd8
http://img529.imageshack.us/img529/8881/dsc01853mediumuz9.jpg

Step 5:Put in flush mount bucket.
http://img412.imageshack.us/img412/3084/dsc01857mediumzy1.jpg

Step 6:Put in the mounting hard ware.
No pictures.

Step 7:Put in the tweeter and put on the face plate thing.
http://img529.imageshack.us/img529/7237/dsc01860mediumry4.jpg

Step 8:Cut out factory bucket to be able to fit bigger magnet on the speaker.
you could also buy new buckets or just keep stock if they fit in them with out modification.
http://img412.imageshack.us/img412/4389/dsc01861mediumfk1.jpg

Step 9: Put speaker into freshly cut mounting bucket, and test fit in door.
http://img529.imageshack.us/img529/8986/dsc01863mediumaq2.jpg

Step 10:Mount crossover. I used trim tape that has a really strong holding strength.
http://img516.imageshack.us/img516/9229/dsc01864mediumzr5.jpg

[Techchild]

Step 11: Sit back and enjoy your handy work. After putting in the speaker, and wiring every thing up.
http://img529.imageshack.us/img529/7973/dsc01866mediumrr7.jpg

Step 12: Look at the finished product.
http://img412.imageshack.us/img412/5145/dsc01867mediumtc3.jpg

[Cravingbass123]

hows the midbass on em at the moment? and hows the tweet sound?

how much power you sending them?

[Techchild]

hows the midbass on em at the moment? and hows the tweet sound?

how much power you sending them?

Well they sound great. The midbass is lacking right now but that is because they still need to be broken in and are way under powered and the doors arent deadened or sealed. The tweets sound good to I just need to aim them better. I'm sending them probally 15 watts rms lol.
They are running off my headunit till I get my mid high amps installed.

[dman4486]

i see you chose the flush...looks nice

[Techchild]

i see you chose the flush...looks nice

Yah I was gonna use the cup but it looked goofy all the ways I tried it on my door panel.

[BASS_WARRIOR]

nice speakers. I'm glad you know the difference between right and wright also....

[Techchild]

nice speakers. I'm glad you know the difference between right and wright also....

Yes I know I was doing it in a rush. :eek: I pmed a mod to change it for me.
And I spell it write any ways lol

[BASS_WARRIOR]

lmao i cant spell either i guess

[Techchild]

Any comments on the install? I know I need to deaden the doors but other then that Do you like it?

[ProgMtl]

Looks pretty good....just need to color the part around the tweeter black

[Techchild]

Looks pretty good....just need to color the part around the tweeter black

I was thinking that also. But for now I like how it matches the grey parts on my doors.

[ProgMtl]

Looks like it matches pretty close in the first picture with the tweeter, but not the last one

[Techchild]

Looks like it matches pretty close in the first picture with the tweeter, but not the last one

Glare from the flash on that last one.