PDA

View Full Version : Build log: 16.25 cubes, 18" RE SX's, bed box for Avalanche



Supergumby5000
02-14-2008, 03:01 AM
EDIT: Pictures start on page 2





Whelp, im sitting in my dorm room right now with two 18" RE SX's next to me, and its about time i put em in my truck. I have a three day weekend, so im going to drive home and get the box going (and hopefully finished), ill have half of saturday and all of sunday to cut, build, and paint, and monday morning to put it in the truck, and i need to put on an exhaust system and air intake as well. So, between me and my dad, hopefully we can get this cranked out before i have to drive back on monday!

Anyways, this is going to be two 18" RE SX's powered by an IA20.1 at 0.5 ohms.

EDIT: I wanted to have a little more port area, so i redesigned the box and squished as much port in the face as i could. Now it will have a gross volume of around 17cu ft, 14cu ft net volume @ 34 hz, 195sq in of port area.

http://i149.photobucket.com/albums/s42/Supergumby5000/10port.jpg

casper97ta
02-14-2008, 04:21 AM
Looks like a good design. How do you keep your boxes mounted to your truck with the built in blow through design?

Supergumby5000
02-14-2008, 04:25 AM
Looks like a good design. How do you keep your boxes mounted to your truck with the built in blow through design?

Chevy Avalanches have a midgate that opens up into the bed of the truck from inside the cab. I just removed the gate, and the box takes its place.

as for mounting, the box will fit pretty darn snug. Its designed to slide in and push right against the opening. I'll use a couple of L-brackets on the backside to bolt the box to the bed of the truck.

chinxtaboi
02-14-2008, 04:40 AM
keep us posted with pics.. its gonna be a loud mutha..

blackbonnie
02-14-2008, 06:25 AM
subscribed

Supergumby5000
02-14-2008, 05:08 PM
just did the cutout sheet, and its looking like this is going to take two and a half sheets of MDF, gonna be one heavy bish

hoxie08
02-14-2008, 05:15 PM
just did the cutout sheet, and its looking like this is going to take two and a half sheets of MDF, gonna be one heavy bish

god ****. i would HATE to have to move that.

Blove1991
02-14-2008, 10:44 PM
Goodluck with your build

Random1010
02-14-2008, 11:05 PM
gonna be building in seattle?

Jeremy M
02-15-2008, 01:04 AM
im n seattle right now and if u get it done
id love to hear it.
or anyone in the seattle areas

Supergumby5000
02-15-2008, 02:19 AM
gonna be building in seattle?

sort of, i'll be building it at my parents house over in Poulsbo, west side of the sound.

Supergumby5000
02-15-2008, 02:19 AM
im n seattle right now and if u get it done
id love to hear it.
or anyone in the seattle areas

^^^ read above post, lol

Random1010
02-15-2008, 02:22 AM
ahh...i was gonna say id come by and check it out, even help out if you need it but ur not exactly local lol. but lemme know if you need anything. still have the box for the 15"s?

Supergumby5000
02-15-2008, 03:39 AM
ahh...i was gonna say id come by and check it out, even help out if you need it but ur not exactly local lol. but lemme know if you need anything. still have the box for the 15"s?

yeah i still got the box, you want it? i may have the on thats in my truck now, but i think im just gonna throw it in one of the schools dumpsters heh

oh, and this weekend i have to build the box, paint it, rewire the amps, put on an exhaust system and air intake, as well as some tidbits as burnt out brake light and doing a DRL mod to do in two days :crazy: any help would be helpful lol. I think i should be able to get it all done, between me and my padre

JBloud47
02-15-2008, 02:09 PM
Good looking design, im bout to start a build my self with four 18" Sx's.

Fattony911
02-15-2008, 11:17 PM
that's gonna be **** loud my friend, good luck

Supergumby5000
02-16-2008, 02:50 AM
whelp, i made it home tonight. Theres good news and bad news.

The good news is the forecast is clear all weekend (normally raining here), so the building should go a little easier and quicker, and i talked my dad into giving me a hand with the other things i need to take care of such as the exhaust and whatnot. should be a promising weekend.

the bad news is, i forgot my camera in my dorm lol. So, im gonna try to snag my sister camera. If not, we'll have to settle for my 2 megapixel camera phone :crap:

I took measurements to make sure my box design will work, and it will. I also went to rip my other box out, and between four of us, we had no luck. Looks like i get to have some fun with the sawzall and a sledge tomorrow evening.

BassHead99
02-16-2008, 11:25 PM
Were those the SX's in the for sale section?

Supergumby5000
02-17-2008, 04:31 AM
okay, finally some pictures and progress. First off, sorry about some of the pictures being retarded. It was my sisters camera, and was much different then my own.

Anyways, the box building commenced and was almost finished today. I didnt have many tools to work with, but i was pretty happy with the outcome. There needs to be some sanding done, but im happy with the product, especially with the tools i had.

Getting ready, 3 sheets of MDF, used 2 and a half

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0485.jpg

my straightedge (and i dont mean the right triangle either)

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0486.jpg

the loudest saw in teh worldz

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0487.jpg

the pieces all cut out. like i said, i dont know what was going on with the camera, and it wasnt the lense:

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0490.jpg

putting everything together. make sure to notice the brilliance behind the order-of assembly and how we left the back piece out :crap:

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0491.jpg

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0492.jpg

its a big'un

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0493.jpg

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0494.jpg

i was almost done, just about to start putting a couple screws through the top board into the port, then this happened:

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0495.jpg

Supergumby5000
02-17-2008, 04:32 AM
and this is how the box currently sits. It will be sanded, primed and painted tomorrow. The whole box will get primer, and the face is going to be painted white. Im not sure why i chose white, but i didnt want any of the other colors available.

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0496.jpg

big ol port

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0497.jpg

flipside1212
02-17-2008, 04:41 AM
nice cant wait to see the outcome

blackbonnie
02-17-2008, 10:25 AM
lookin real good. keep em coming

pmpmstrb
02-17-2008, 12:49 PM
the pieces all cut out. like i said, i dont know what was going on with the camera, and it wasnt the lense:

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0490.jpg



No worries about the pics, it's just mdf dust in the air. Looking good though.

energizedsbs
02-17-2008, 01:00 PM
good start man... keep it up

Supergumby5000
02-17-2008, 07:23 PM
update!

everything is going along nicely. I took a break from the box so the primer could do its thing, and in that time the air intake and exhaust system went in. I also got started on a new amp rack to accomodate the IA 20.1 for when it arrives next week.

more pics up tonight.

audiobahnuser18
02-17-2008, 07:26 PM
Man look's great. Can't wait to see it once it's done and see vids. gl with the build man:D

revrider1
02-17-2008, 07:28 PM
Look nice

phensway
02-17-2008, 07:29 PM
Something louder than those two 15 inch alpines? Wow, i wish i would have got an avalanche instead of a crew cab silverado. Super stealth systems! Good luck!

KINGDELL91
02-17-2008, 07:34 PM
SWEET WORK MAN!! make sure you do vids!!

00EclipseGT
02-17-2008, 07:37 PM
**** that's a huge box! Nice work.

hoxie08
02-17-2008, 07:38 PM
looks good man.

craigzter
02-17-2008, 07:43 PM
looking real good bro. Thats a huge *** box.

keep up the great work and keep us posted! can't wait to see the outcome

Supergumby5000
02-17-2008, 08:04 PM
alrighty, i ran out of primer so ill take a break for it to dry up and post some pics.

a whole lot got done today. The amp rack is painted and drying, the box is awaiting paint, exhaust system and air intake went on, the old box was destroyed and ripped out.

Pretty much all thats left now is to get the box and subs in, reorganize all the wiring, then i just have to wait for the sub amp to arrive (which should be Tuesday)

when i first starting applying the primer:

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0499.jpg

ripping out the old box. The jigsaw and sawsall came in handy here!

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0500.jpg

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0501.jpg

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0502.jpg

ahhhh, much better.....

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0503.jpg

the box waiting for paint!

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0537.jpg

and the truck waiting for the new setup

http://i149.photobucket.com/albums/s42/Supergumby5000/DSCN0538.jpg

99grandprixGT
02-17-2008, 08:07 PM
looks good man, so does the box take up all the space, so you don't have to seal around it or anything?

Supergumby5000
02-17-2008, 08:10 PM
looks good man, so does the box take up all the space, so you don't have to seal around it or anything?

it takes up most of the space. The bed is 50" wide, and the box is 49.5" wide. Once its in, i'll most likely put in shim boards on the sides and push them up to the cab to seal that spot. I'll also run a bead of silicone along the top of the box to seal it into the cab.

MikeyB
02-17-2008, 08:18 PM
Nice, that box looks good

amartin_72
02-17-2008, 08:44 PM
I would put a double face on that cause the pieces which the subs are mounted are the weak way as opposed to screwed on from the front.

amartin_72
02-17-2008, 08:45 PM
Looks good though I will like to hear how it sounds compared to the R's, given you have a better amp now too.

937DYTBOI
02-17-2008, 08:48 PM
dizam that **** is going to slam son, man i want to see vids, whats your electrical like

Supergumby5000
02-17-2008, 09:05 PM
I would put a double face on that cause the pieces which the subs are mounted are the weak way as opposed to screwed on from the front.

if you mean double baffle, it has one :veryhapp:

Supergumby5000
02-18-2008, 04:19 AM
update! the box is in, and it looks **** good. Getting it in was a close call tho, we had to take the tailgate off (its slightly raised) and put the box in at a downward angle in order to squeeze it in there. I still have a good two and a half feet of bed room behind the box too, which is a bonus.

now, i just gotta get the amp rack in tonight and everything is good to go, minus the missing amp. Its dark, so i'll get some good pics up tomorrow!

SHiZNiLTi
02-18-2008, 05:30 AM
Man, thats gonna pound hard. Solid Design.

MTXman
02-18-2008, 12:08 PM
God that's gonna be loud as hell.

150's @ the dash? Yes.

Supergumby5000
02-18-2008, 11:38 PM
okay, i've been slacking on the picture department. I just got back to college, a friggin 6 hour drive, so here's a teaser pic until i can take my digital camera down to the truck to snap a few more pics

http://i149.photobucket.com/albums/s42/Supergumby5000/IMG00096.jpg

Supergumby5000
02-19-2008, 01:29 AM
alrighty, finally some pics!

What you see.....

http://i149.photobucket.com/albums/s42/Supergumby5000/P2180849.jpg

And behind the seat.....

http://i149.photobucket.com/albums/s42/Supergumby5000/P2180850.jpg

from the front seat, i should have painted the back of the inside of the box

http://i149.photobucket.com/albums/s42/Supergumby5000/P2180851.jpg

and the remaining room in the bed (this is a 17cu ft gross box)

http://i149.photobucket.com/albums/s42/Supergumby5000/P2180852.jpg

Supergumby5000
02-19-2008, 01:53 AM
......

is it that bad? :crap:

82 cutlass
02-19-2008, 02:27 AM
I like it :) . That should be loud .

Must make vid when it's finished

BrianChia
02-19-2008, 02:28 AM
It looks good. But yeah you should have painted the inside with such as huge port. :) I like the look of the white paint though.

matrxx dude
02-19-2008, 02:32 AM
i done a avalanche like that with 2 mt 18's,with 8k,it was impressive.

Supergumby5000
02-19-2008, 02:36 AM
i done a avalanche like that with 2 mt 18's,with 8k,it was impressive.

8k? **** lol. this will just be around 2200-2500RMS @ 0.5ohms, or whatever the IA 20.1 will want to give me with a kinetik 800, kinetik 2400, the big 3, and a 130amp alty.

matrxx dude
02-19-2008, 02:37 AM
8k? **** lol. this will just be around 2200-2500RMS @ 0.5ohms, or whatever the IA 20.1 will want to give me with a kinetik 800, kinetik 2400, the big 3, and a 130amp alty.


it will be enough:D

Wkbdkid
02-19-2008, 03:36 PM
Looks sweet. Almost makes you think that the truck was designed to have a blow through.lol. Post vids when ya can.

big_mofo
02-19-2008, 05:48 PM
thats a ****** setup man, u are goin to be loud........

blackbonnie
02-19-2008, 07:51 PM
that looks reall nice

Supergumby5000
02-19-2008, 08:00 PM
update, a new toy came in the mail today courtesy of bonesninja

http://i149.photobucket.com/albums/s42/Supergumby5000/P2190853.jpg

once its all wired up, ill post up some vids, but i may not get it in until tomorrow.

MTXman
02-19-2008, 08:12 PM
Might wanna get two of those :) Haha but nice amp choice. Yeah shoulda painted that back wall and hid the wires but oh well.


Tonneau cover?

Supergumby5000
02-19-2008, 08:14 PM
Might wanna get two of those :) Haha but nice amp choice. Yeah shoulda painted that back wall and hid the wires but oh well.


Tonneau cover?

yes, i have a tonneau

and those wires will be hidden, except for a few inches where they come out of the face of the box. Those are just at excess lengths at the moment until the amp is mounted and wired

now i needa figure out how to set my gains without a DMM, i gotta be careful at 0.5ohm load lol

MikeyB
02-19-2008, 09:58 PM
DMM is almost the only way to go without a scope.....if your super duper easy with it you can tweak it up a little but I wouldnt go past ~half without a dmm, you can get a cheapo DMM from meijer for like 10 bucks which will work just fine for settin the gain.

Supergumby5000
02-19-2008, 11:46 PM
update!

i got the 20.1 in, and it sounds **** good. It needs some tweaking still though. It hits the lows very very hard, but i feel like anything around 45-55hz is weaker then the 15" Type-R's. My only guess is because of the gain though. I set it fairly low for now to see how the amplifier reacts to my setup at 0.5ohms, so far it warms itself up, but doesnt get warm (its cold outside, so it will warm up from outside temperature to about the same temperature as my skin). I'll prolly turn the gains up a bit tomorrow and see how it reacts. the subs are only getting about 1000rms a piece right now, and i stay above 12volts even cranked at idle.

mobeious
02-20-2008, 12:01 AM
prolly need to shoot for around 38v

Supergumby5000
02-20-2008, 12:04 AM
prolly need to shoot for around 38v

hmm okay, im sitting somewhere between 33 and 34, so i have some room to play with it sounds like

MikeyB
02-20-2008, 12:33 AM
prolly need to shoot for around 38v

yup, 37~38 area

Supergumby5000
02-20-2008, 12:35 AM
thanks for the input guys. I'll run down to my truck and turn the gain up a tad bit, and maybe get a teaser vid, although its pretty dark out

Supergumby5000
02-20-2008, 01:59 AM
okay, im gonna call this one finished. All thats left to do is organize and hide the wires, and polish up the amps a bit. Heres a few pics and some teaser vids until its light out. The vids were done at idle and about 3/4 volume

http://i149.photobucket.com/albums/s42/Supergumby5000/P2190860.jpg

http://i149.photobucket.com/albums/s42/Supergumby5000/P2190858.jpg

http://i149.photobucket.com/albums/s42/Supergumby5000/th_P2190862.jpg (http://s149.photobucket.com/albums/s42/Supergumby5000/?action=view&current=P2190862.flv)

http://i149.photobucket.com/albums/s42/Supergumby5000/th_P2190863.jpg (http://s149.photobucket.com/albums/s42/Supergumby5000/?action=view&current=P2190863.flv)

Random1010
02-20-2008, 02:06 AM
wow. im impressed. this thread has made me go back to 18"s

Andrew12
02-20-2008, 02:10 AM
looks a bit nice

tez4life
02-20-2008, 02:26 AM
Nice build, looks like a big step up from the previous setup.

casper97ta
02-20-2008, 02:34 AM
Really nice man. Sounds good and looks good to boot. Man, you really have some clearance under those backseats if you can fit a 2400 under there. Those trucks were made for systems.

dbhittin
02-20-2008, 02:39 AM
i miss my re 18

Supergumby5000
02-20-2008, 02:39 AM
Really nice man. Sounds good and looks good to boot. Man, you really have some clearance under those backseats if you can fit a 2400 under there. Those trucks were made for systems.

yeah hehe, it BARELY fit, and thats the only spot it would fit is why it is there. That one seat has an arc in it, making just enough room

SHiZNiLTi
02-20-2008, 04:58 AM
AWESOME, are the subs broken in yet?

If you can do this it would be great...


make an excursion video
make a flex video from outside of the truck
find a hot chick with long hair and attempt a hair trick
pull up to a building with large windows and make them flex

MTXman
02-20-2008, 11:10 AM
make an excursion video
make a flex video from outside of the truck
find a hot chick with long hair and attempt a hair trick
pull up to a building with large windows and make them flex


Definitely do these!

vetkilr
02-20-2008, 11:20 AM
Sweet bro......look forward to seeing more vids.

riceburner
02-20-2008, 11:29 AM
nice, definitely do the vids that shiz requested

fbi90909
02-20-2008, 12:13 PM
very nice.
i really wanted an avalanche or an explorer for my first real car but ended up with a civic. either way i can't wait to start my rebuild.

you need to make some flex vids!

squeak12
02-20-2008, 12:20 PM
First video with 8 sec. left, did you get a text exactly when the bass dropped, or did it make your phone light up from bouncing around?

MikeyB
02-20-2008, 12:32 PM
AWESOME, are the subs broken in yet?

If you can do this it would be great...

make an excursion video
make a flex video from outside of the truck
find a hot chick with long hair and attempt a hair trick
pull up to a building with large windows and make them flex

x2

jdc753
02-20-2008, 12:44 PM
This is an awesome setup you got going. My friend has been talking about for months on trading in his chevy 1500 extended cab on an avalanche, now I am sooo gonna be nagging him till he gets one lol.

Supergumby5000
02-20-2008, 02:14 PM
First video with 8 sec. left, did you get a text exactly when the bass dropped, or did it make your phone light up from bouncing around?

made the phone light up lol. I couldnt get it to do it a second time tho :rolleyes:

Supergumby5000
02-20-2008, 02:15 PM
ill try to get some excursion and flex vid's later today, if time permits.

Supergumby5000
02-20-2008, 03:52 PM
i took a few quick vids, but i need to find a better camera. My POS wont pick up the fast movements like excursion or panel flex :crap:

its weird watching your door go in and out 1/2", then looking through a camera and seeing none of it :fyi:

SHiZNiLTi
02-20-2008, 04:18 PM
i took a few quick vids, but i need to find a better camera. My POS wont pick up the fast movements like excursion or panel flex :crap:

its weird watching your door go in and out 1/2", then looking through a camera and seeing none of it :fyi:

I hear ya, I'm still saving to get a better camera too.

Most cameras dont record panel flex and sub excursion that well because they record video in 15-30fps.

If you want the excursion and flex to show up you need a digital camera that has a selectable video mode of 60fps. With the higher frame rate it picks up twice as much movement as a camera with standard 30fps recording. A friend of mine has a the below camera and he does skateboarding video's with it and it turns out really sick looking. Another cool thing about recording in 60fps is that when you add a slowmotion effect it will look much smoother then if it was at 30fps because you have twice as many frames.

Canon PowerShot SD450...
http://www.photobird.com/learn/canonsd450.html

Any digital camera with 60fps video mode will work great.

MikeyB
02-20-2008, 07:14 PM
That shits bangin yo! ;)

BTW whats the name of the song in the second vid, I have it I just cant remember teh name :)

Supergumby5000
02-20-2008, 07:23 PM
That shits bangin yo! ;)

BTW whats the name of the song in the second vid, I have it I just cant remember teh name :)

hood n igga, chopped and screwed

bonesninja
02-20-2008, 08:31 PM
so i take it the amp works.....

Supergumby5000
02-20-2008, 10:27 PM
so i take it the amp works.....

:laugh: sure does. thanks!

MikeyB
02-20-2008, 10:32 PM
hood n igga, chopped and screwed

thanks pimp

tooloud4tv
02-24-2008, 09:15 PM
**** how the hell did i miss this thread good job man u just inspired me to keep my sx's i will start my box friday! **** i wonder how mine will sound with over 2000 rms to each SUB?! **** if u only sending them 1000-1300 rms ! im excited

SVT RELAMPAGO
02-25-2008, 02:37 AM
Nice......... finally the sub can show off like it was meant to haha. I want it back haha

tooloud4tv
02-26-2008, 11:26 AM
any video updates? its raining here and i cant start my **** box! im so anxious! more vids please!

9512ds
02-26-2008, 05:03 PM
this setup looks awesome dude. super impressed.

and thats a good looking truck as well.

Supergumby5000
02-27-2008, 01:13 PM
any video updates? its raining here and i cant start my **** box! im so anxious! more vids please!

thanks for all the comments guys

im still workin on vids. i need to find a decent camera! :crap:

na_rsx
02-27-2008, 01:38 PM
I hear ya, I'm still saving to get a better camera too.

Most cameras dont record panel flex and sub excursion that well because they record video in 15-30fps.

If you want the excursion and flex to show up you need a digital camera that has a selectable video mode of 60fps. With the higher frame rate it picks up twice as much movement as a camera with standard 30fps recording. A friend of mine has a the below camera and he does skateboarding video's with it and it turns out really sick looking. Another cool thing about recording in 60fps is that when you add a slowmotion effect it will look much smoother then if it was at 30fps because you have twice as many frames.

Canon PowerShot SD450...
http://www.photobird.com/learn/canonsd450.html

Any digital camera with 60fps video mode will work great.

i have a sd850is, and i am sure it has 60fps, but how the hell do you select it lol

SHiZNiLTi
02-27-2008, 03:51 PM
i have a sd850is, and i am sure it has 60fps, but how the hell do you select it lol
I'm not exactly sure, but If you go into the options for record modes choose the one that says...

"320 x 240 @ 60 fps (Fast Frame Rate)"

TheFiverMan
02-27-2008, 03:59 PM
looks nice..how much louder then ur 2 15" Rs?

mdsheely
02-27-2008, 07:31 PM
thanks for all the comments guys

im still workin on vids. i need to find a decent camera! :crap:


Whats up man. The Subs looks sick. No pics of the intake or exhaust I sold you? Man I would be showin that off too. I guess I should ask if you have installed it yet. Its really pretty easy. Well mine was. Just got to cut the old one out, then bolt the new one in. Basically just hangs on the rubber grommet hangers.
Let me know about the other thing, when you get a chance.

KINGDELL91
03-01-2008, 07:34 PM
looking good man!!!

lostdaytomorrow
03-03-2008, 04:21 PM
Videos stat.

Supergumby5000
03-04-2008, 02:07 AM
Videos stat.

i dont have a good camera here at college :crap:

ill post up a couple vids i tried to take, but my camera doesnt pick up like 90% of the flex or even the sub excursion, give me a few mins

dbhittin
03-04-2008, 02:30 AM
hella sick

Supergumby5000
03-04-2008, 02:33 AM
alrighty guys, this is the best i got for you now.

as you can tell in this excursion vid, the camera isnt catching crap, at least not until the bass gets real low....

http://i149.photobucket.com/albums/s42/Supergumby5000/th_excursion.jpg (http://s149.photobucket.com/albums/s42/Supergumby5000/?action=view&current=excursion.flv)


If you look closely, the steering wheel jumps around quite a bit....

http://i149.photobucket.com/albums/s42/Supergumby5000/th_dashbounce.jpg (http://s149.photobucket.com/albums/s42/Supergumby5000/?action=view&current=dashbounce.flv)


Sunroof flex, its weird how this video doesnt pick up the actual roof flex though

http://i149.photobucket.com/albums/s42/Supergumby5000/th_sunroofflex.jpg (http://s149.photobucket.com/albums/s42/Supergumby5000/?action=view&current=sunroofflex.flv)


I took this the other day when waiting for my buddy at the ATM, meh

http://i149.photobucket.com/albums/s42/Supergumby5000/th_P3010876.jpg (http://s149.photobucket.com/albums/s42/Supergumby5000/?action=view&current=P3010876.flv)

MikeyB
03-04-2008, 02:46 AM
Nice flex bro!! Very impressed!!

Supergumby5000
03-04-2008, 02:47 AM
Nice flex bro!! Very impressed!!

you're not seeing much of it heh :rolleyes:

TheFiverMan
03-04-2008, 01:09 PM
nice..so how much louder are they then the type rs?

jdc753
03-04-2008, 01:22 PM
dang those things hit pretty hard. Gotta be someone at school you can borrow a good camera from. What about the old staple classic, see what you can bounce around off your roof lol, some quarters, cell phone, ect. Your camera should at least be able to pick that up.

Supergumby5000
03-04-2008, 02:19 PM
nice..so how much louder are they then the type rs?

As of right now, anything around 45+hz is just about the same as the Type-R's, but the SX's make it sound much cleaner, whereas the Type-R's were pretty muddy

anything below that destroys what the Type-R's put out. The SX's could use a wee bit more power though.

Random1010
03-04-2008, 02:20 PM
next time your in seattle shoot me a pm..id like to hear em. plus in May ill be getting my IA DP 21" hehe

Anniku989
03-04-2008, 02:29 PM
Meh, **** the school blocking photobucket or imageshack images. Posting so I'll be subscribed when I get home later tonight...

Sounds like fun though

Supergumby5000
03-04-2008, 02:33 PM
next time your in seattle shoot me a pm..id like to hear em. plus in May ill be getting my IA DP 21" hehe

will do! Im heading back that way this weekend, friday morning to be exact, but im flying out to cali sunday.

Random1010
03-04-2008, 02:34 PM
will do! Im heading back that way this weekend, friday morning to be exact, but im flying out to cali sunday.

ya this weekend ill be busy f'glassing a box and such. next time though for sure..

omega_t666
03-16-2008, 10:54 AM
Nice setup! what numbers does your system hit?