View Full Version : picking box plans

02-12-2008, 06:21 PM
can sombody help me pick a box plan for my sub. a single 12" dvc kicker cvr at 4ohms but wired to 2ohm

i was thinking of using the demensions on the free box plan to make my box but not sure which one will work.. i want it to hit deep and clean. thanks


link to free box designs.

02-12-2008, 06:25 PM
How much power will be on it? What kinda music? And comp or street setup?

02-12-2008, 06:26 PM
street setup, 400 rms will but powering the single 12". rap,rnb,techno will be played

02-12-2008, 06:33 PM
also how much space do you have that you want to use?

02-12-2008, 06:35 PM
you want something around 1.75 to 2.5 after speaker and port displacement. Tuned around 35Hz. Find the plans closest to those and ull be happy.

02-12-2008, 06:49 PM
2 @ 35hz or 2.35 @ 33hz.

02-12-2008, 06:59 PM
i want to make a box that wont take up much space also.

so either these two would be good?



btw thanks brian for finding me that design

02-13-2008, 12:32 AM
would i need to add braces inside the box if i used one of those box designs? and would this sound better then a premade box? i plan to get the mdf tomorrow and start making it :)

02-15-2008, 09:57 PM
so i finished making the box but havent tried it yet. how long do u guys suppose it will take before the glue and liquid nail to dry? and is it ok to drill a small hole and run the wire through or it'll sound ****** this way and i should seal it back up?

tell me what u think about the box and if it looks done correctly :)


02-15-2008, 10:01 PM
not bad.....looks like you used too many screws tho..........

02-15-2008, 10:10 PM
Looks good, put a little silicone on the wire where you brought it out of the box to seal it up tight.

EDIT: that grill is ugly!!!!1

02-15-2008, 10:53 PM
haha i got that grill from a old home speaker. i thought i would use it until i find a kicker one for a good deal

02-19-2008, 08:45 PM
lol did u use the box plan on here the 2 cube 35 number 1 i just did that plan 2 days ago...box pwns