PDA

View Full Version : need help, need box plan and cut sheet



patrick1202
02-10-2008, 12:58 PM
ok so i need a box plan for a 15" fi ssd if anyone could throw together a simple one for me!
h=13
w=39
d=16

slot port tuned around 32-35 hz's would like a cut sheet too if possible
sub up,port forward

BuckyBoy
02-10-2008, 01:02 PM
Is there a certain amount of airspace you want, or just use those dimensions and whatever it come out to.
I will throw you one together for a few bucks.

patrick1202
02-10-2008, 01:09 PM
i want 3.5 cubes or more but that's about the biggest i can go with measurements

BuckyBoy
02-10-2008, 03:10 PM
With those dimensions, you are going to end up with anywhere from 2.75-3ft^3

patrick1202
02-10-2008, 06:36 PM
it is 3.69 cubes

regal8r
02-10-2008, 06:37 PM
you have to account for port, driver and actual wood displacement

BuckyBoy
02-10-2008, 06:38 PM
it is 3.69 cubes
Ok, now consider port and sub displacement.

patrick1202
02-10-2008, 06:51 PM
sub is .17
don't know port

BuckyBoy
02-10-2008, 06:53 PM
Like I said, you will end up with anywhere from 2.75-3ft^3.

patrick1202
02-10-2008, 07:00 PM
well website says 3-4 cubes

BuckyBoy
02-10-2008, 07:05 PM
well website says 3-4 cubes
You are going to need to make one of the dimensions bigger.

richierich75
02-11-2008, 10:06 AM
Is there a certain amount of airspace you want, or just use those dimensions and whatever it come out to.
I will throw you one together for a few bucks.

sorry about the hijack - but Bucky will you take a look at this thread and let me know how much you want for the design and cut sheets?????? PLEASE

http://www.caraudio.com/forum/showthread.php?t=291169