PDA

View Full Version : new build log



bones22
02-10-2008, 12:44 PM
replacing my 4 cadence daytona 15s.

build will be starting over the next week or 3 since im back down at fort polk i wont have a lot of time to work on it.

without to much detail the 4 15s are being replaced with
ONE 10" sub

it will be powered with my Cadence ZRS9000D so it will be getting approx. 9000-9500 thrown at it daily.


may do the complete box in lexan i havent decided yet

dpom
02-10-2008, 12:49 PM
what kind of sub are you putting in there?

bones22
02-10-2008, 02:50 PM
DD

yunvme666
02-10-2008, 02:58 PM
you got the 9910z huh.....lol......... good deal man.... lots of luck to ya...........

bones22
02-10-2008, 03:01 PM
you got the 9910z huh.....lol......... good deal man.... lots of luck to ya...........

MAYBE

H*LL YES I DID
as soon as i saw it especially for the price

packerfan
02-10-2008, 03:04 PM
pix of said build log?

bones22
02-10-2008, 03:15 PM
pix of said build log?

i will post some pics of the equip. i cant get started just yet since im back down at fort polk. all my tools are up in illinois. i will be back up there in a few days though.

yunvme666
02-10-2008, 03:21 PM
very nice......

bones22
02-10-2008, 05:30 PM
as promised here are the pics.
along with another little suprise i got to put in my regular cab s10

http://i30.tinypic.com/120i2rk.jpg
http://i31.tinypic.com/2r2w32v.jpg

and the last little goody

http://i27.tinypic.com/o86r9s.jpg

mile098
02-10-2008, 05:33 PM
that thing can handle 9 k rms?

bones22
02-10-2008, 05:34 PM
that thing can handle 9 k rms?

it takes 15k RMS

yes

dvrmstrng
02-10-2008, 05:36 PM
what did you pay for it?

ultimate157
02-10-2008, 05:40 PM
how much does it weigh?

bones22
02-10-2008, 05:40 PM
what did you pay for it?

NOT retail


pm sent

mile098
02-10-2008, 05:43 PM
it takes 15k RMS

yes

daily? never was a big fan of DD but that thing looks nice..really nice

icpurplepplalot
02-10-2008, 11:54 PM
guessing you bought la_crx's ;) gonna sound very nice when all is said and done

60ndown
02-10-2008, 11:57 PM
daily? never was a big fan of DD but that thing looks musical..really musical

fixed.

60ndown
02-10-2008, 11:58 PM
guessing you bought la_crx's ;) gonna sound very loud when all is said and done

fixed

hoxie08
02-11-2008, 12:02 AM
fixed

me too

yunvme666
02-11-2008, 12:23 AM
thats just gonna be such a bad *** daily sub......

hazardous0388
02-11-2008, 01:00 AM
you gotta let me come here it when you get done. why would you want to work in this cold *** weather anyways? ha. you going to be doing any benchmark shows with that thing?

bones22
02-11-2008, 06:04 PM
you gotta let me come here it when you get done. why would you want to work in this cold *** weather anyways? ha. you going to be doing any benchmark shows with that thing?

lucky me im in 82 degree weather right now but yea when its in come listen

yea ill go to bit*hmark to make there cars look like sh*t

bones22
02-11-2008, 06:06 PM
how much does it weigh?


id say around 55-60 pounds takin a guess

the neo is probably 30-40 by itself

nineballsafety8
02-11-2008, 07:13 PM
bones... i would be honored to run up to benchmark with you HEHEHE... they wont know what to do.

bones22
02-11-2008, 07:23 PM
bones... i would be honored to run up to benchmark with you HEHEHE... they wont know what to do.

they about sh*t with my 9cu ft downfiring box in my dakota
i cant imagine what your beast would make them say

JUST GET YOUR A** HOME SAFE

nineballsafety8
02-11-2008, 07:38 PM
will do... i will be back for a couple of weeks in late april, early may. do u remember when the cruise for charity is?

bones22
02-11-2008, 07:42 PM
will do... i will be back for a couple of weeks in late april, early may. do u remember when the cruise for charity is?

not off hand ill find out though. im back south at wonderful ft polk processing out of the army finally after 3 years of BS.

nineballsafety8
02-11-2008, 08:03 PM
atleast your on your way out... ***** that you had to go back to the armpit of Polk to process though... congrats

bones22
02-11-2008, 08:07 PM
atleast your on your way out... ***** that you had to go back to the armpit of Polk to process though... congrats

***** that when i get home i need surgery on my lower back, my neck, and a cyst they found at the base of my brain,
thanks to wonderful ft puke and the army for all of those injuries

nineballsafety8
02-11-2008, 08:16 PM
go army HOOAH... (my a$$)
its not a bad job, if they didnt treat us like such crap!

bumpin buick
02-11-2008, 08:26 PM
u should sell me your z1a

bumpin buick
02-11-2008, 08:26 PM
not like your going to need it with that cadence amp

MyFartsStink
02-11-2008, 11:51 PM
**** man a video is a must when you finish this project. Ive seen em a couple times, but never was able to hear one more than a couple houndred watts. Ive got to see this in some action with real power.

RAM_Designs
02-11-2008, 11:57 PM
what did you pay for it?
1.5k

how much does it weigh?
46lbs.

bones22
02-12-2008, 12:39 AM
1.5k

46lbs.

a little off on the price saved some$ driving my *** to get it

bones22
02-12-2008, 12:40 AM
**** man a video is a must when you finish this project. Ive seen em a couple times, but never was able to hear one more than a couple houndred watts. Ive got to see this in some action with real power.

will do

bones22
02-12-2008, 07:35 PM
just an update still at ft polk havent been able to start building yet but will have a rendering of the box tomorrow night to post.

thanks in advance to
BuckyBoy

looks sweet so far

chinxtaboi
02-13-2008, 12:30 AM
holy shot.. 1.5k for that sub? thats one mean lookin sub though.

bones22
02-13-2008, 02:13 PM
holy shot.. 1.5k for that sub? thats one mean lookin sub though.

this is the 1st Gen Z there are only a very small handfull in the US. DD says there were 16 well i have 1 now thanks to Louisiana_CRX

here is what the box will look like. thanks to BuckyBoy.

http://i30.tinypic.com/289hw.jpg

only thing not shown is i will be using 3/4 lexan on 1 side so everyone can see its not just some 9510

bones22
02-13-2008, 07:04 PM
just ordered some lexan. everything will be at home waiting for me so when i get there i can get this thing built and installed. i need my bass back bad.

nineballsafety8
02-13-2008, 07:18 PM
any estimates on output?

15nissen
02-13-2008, 07:25 PM
ill be at a convention in Springfield @ the Hilton march 2nd-4th. i would love to see it / give you a hand.

bones22
02-13-2008, 08:08 PM
ill be at a convention in Springfield @ the Hilton march 2nd-4th. i would love to see it / give you a hand.


no problem get get ahold of me around then
if i can find 1 more they will be 18s by then with 2 9000ds on them

bones22
02-13-2008, 08:09 PM
any estimates on output?

its no small vehicle id say 150s for sure hopefully break 160s

MyFartsStink
02-13-2008, 08:30 PM
**** man you got a GREAT deal for that sub. Just one of those magnets on the side is worth 50-100 even more maybe.

bones22
02-13-2008, 08:40 PM
**** man you got a GREAT deal for that sub. Just one of those magnets on the side is worth 50-100 even more maybe.

im considering taking the bottom plate off and removing the aluminum cylinders to free up the air and get rid of some motor noise

nineballsafety8
02-13-2008, 09:49 PM
no problem get get ahold of me around then
if i can find 1 more they will be 18s by then with 2 9000ds on them

if you cant find another one, are u still going to reuse the motor and make it an 18, or keep it as a ten and try to get retarded with just one ten?

bones22
02-13-2008, 09:51 PM
if you cant find another one, are u still going to reuse the motor and make it an 18, or keep it as a ten and try to get retarded with just one ten?

if i cant find the same motor it will most likely become a 15 if i ever blow it

MyFartsStink
02-13-2008, 09:54 PM
im considering taking the bottom plate off and removing the aluminum cylinders to free up the air and get rid of some motor noise

dd custom made one that was already like that for this one shop thats good friends with them, but you just got to be sure to not get any dust or water vapors in it. This shop thought it was cool to make an acrylic cylinder type box that had steam it it. Ooops bad idea, messed up the sub, its not blown. It just wont play anymore. It played for a while, and went to many shows, but it couldn't take it.

bones22
02-13-2008, 10:01 PM
dd custom made one that was already like that for this one shop thats good friends with them, but you just got to be sure to not get any dust or water vapors in it. This shop thought it was cool to make an acrylic cylinder type box that had steam it it. Ooops bad idea, messed up the sub, its not blown. It just wont play anymore. It played for a while, and went to many shows, but it couldn't take it.

yea i figured there were soem major drawbacks about it

MyFartsStink
02-13-2008, 11:18 PM
yea i figured there were soem major drawbacks about it

Just dont let water or dust get to it you'll be fine

bones22
02-14-2008, 12:37 AM
need some opinions

run my 9000D to it or my Z1a

JL Audio
02-14-2008, 05:19 AM
what's the fs of that sub? I didn't know you could even use them daily at all..

bones22
02-14-2008, 02:25 PM
what's the fs of that sub? I didn't know you could even use them daily at all..

to be totally honest i couldnt tell you for sure.

DD says it can but with my 9000D i am going to have to watch my gains
unless of course i run the Z1a

casper97ta
02-14-2008, 02:53 PM
That sub was built to take some power. Put that Cadence on that ***** and let it wang. Go big or go home man :D

bones22
02-14-2008, 03:34 PM
That sub was built to take some power. Put that Cadence on that ***** and let it wang. Go big or go home man :D

my thoughts exactly
the guys at DD have said that daily with what ive got i could destroy the soft parts. if i do though there is my reason to recone to bigger

never ran 18s thanks to UPS anyway my fu*kin MTs bastards

to bad DD doesnt have a 21 to do this in