View Full Version : Need To Build A Box
02-10-2008, 11:16 AM
I have an Arc Audio 15 D4.
Manufacturer recommends 3.0 cuft @ 32hz
Driver Displacement .17 cu
Two ports 4" DIA x 18" LGH
Space is not an issue, and I am looking for SQ
ANY SUGGESTIONS ...
02-11-2008, 06:50 AM
here ya go.
02-11-2008, 10:27 AM
Thanks for the suggestion, but the box I need must have two round ports 4" dia and 18" long.
I am also trying to get closer to the 3.17 cft they recommend but don't understand how to incorporate that type of port configuration. Any other suggestions would be helpful...Gianni
02-11-2008, 10:46 AM
It doesn't need to have round ports as you could use a slot port and it would not make an audible difference as long as the port area is sufficient.